Search

The annual worldwide production of coffee exceeds 10 million tons, and more than 90% of this production is waste, including the husk. On the other hand, plastic consumption increases every year, and sustainable alternatives are necessary to decrease it. This work arises to solve these two problems, and seeks to produce products at an industrial level from polyethylene/coffee husk eco-composites. Both Low Density Polyethylene and High Density Polyethylene were used, and the amounts of coffee husk added as filler were 20 and 40 wt%. The composites were characterized by different morphological, thermal and mechanical techniques. Scanning Electron Microscopy images showed husk particles embedded in the polymer matrix, but with some gaps between the polymer and the filler, because no compatibilizer agent was used. The addition of large amounts of natural filler negatively affected the tensile strength and elongation at break, but increases eco-composites crystallinity, and hence, their Young modulus and hardness. The industrial applicability of the eco-composites was verified through the production of five different consumer products by extrusion and injection processes, using mixtures with 40 wt% coffee husks. All products were obtained without significant defects. If only 3.25 wt% of the polyethylene products produced each year in Colombia did so with the eco-composites developed in this work, all the coffee husk produced in the country would be used, and the emission of about 5.390 million m3 of greenhouse gases would be avoided.

The space holder process (SHP) is a useful and common technique to obtain metal foams. However, an important question remains unsolved: Would the quality of the salt affect the properties of the aluminum foam obtained? In this paper, removable preforms of two types of salt (refined and unrefined) were infiltrated with A356 aluminum alloy to obtain metal foams with different pore sizes. The interaction preform-metal was studied from analyzing the morphological structure of the foams, the metal microstructure, and the corrosion resistance of the Al356 alloy. It was observed that, although the two types of salt exhibited some differences, they did not show variations in relation to the porous structure and metal microstructure in the aluminum foams obtained. Additionally, the electrochemical analyses did not show significant effects on the corrosion behavior of aluminum foams caused by the interaction with the salt preforms.

Blends between high-performance polymers (HPP) are barely studied, especially those produced by melting processing. In this work, it is proposed a novel methodology to prepare blends between polymers with notable processing temperature differences: poly(ether imide) (PEI) and poly(butylene terephthalate) (PBT). Processing parameters are settled after thermal and rheological evaluation of pure materials, those results suggest these blends need to be produced by steps. It is found a synergistic effect such as lowering PEI processing temperature and reducing PBT hydrolysis at high temperatures. Propose methodology allows to produce blends between HPP in the whole composition range with the same processing conditions.