Search

We report a silicon microfluidic platform that enables monolithic integration of transparent micron-scale microfluidic channels, an on-chip segmentation of analyte flows into picoliter-volume droplets, and a nano-electrospray ionization emitter that enables spatial and temporal separation of oil and aqueous phases during electro-spray for subsequent mass spectrometry analysis., We report on a silicon microfluidic platform that enables integration of transparent μm-scale microfluidic channels, an on-chip pL-volume droplet generator, and a nano-electrospray ionization emitter that enables spatial and temporal phase separation for mass spectrometry analysis.

Cell enrichment is a powerful tool in many kinds of cell research, especially in applications with low abundance cell types. In this work, we developed a microfluidic fluorescence activated cell sorting (μFACS) device that is able to perform on-demand, low loss cell detection and sorting. The chip utilizes three-dimensional acoustic standing waves to position all cells in the same fluid velocity regime without sheath. When the cells pass through a laser interrogation region, the scattering and fluorescent signals are detected, translated and transported to software. The target cells are then identified by gating on the plots. Short bursts of standing acoustic waves are triggered by order from PC to sort target cells within predefined gating region. For very low abundance and rare labeled lymphocyte mixed with high concentration unlabeled white blood cells (WBCs), (1-100 labeled lymphocytes are diluted in 106 WBCs in 1 mL volume fluid), the device is able to remove more than 98% WBCs and recover labeled lymphocyte with efficiency of 80%. We further demonstrated that this device worked with real clinical samples by successfully isolating fetal nucleated red blood cells (FNRBCs) in the blood samples from pregnant women with male fetus. The obtained cells were sequenced and the expressions of (sex determining region Y) SRY genes were tested to determine fetal cell proportion. In genetic analysis, the proportion of fetal cells in the final picked sample is up to 40.64%. With this ability, the device proposed could be valuable for biomedical applications involving fetal cells, circulating tumor cells, and stem cells. This article is protected by copyright. All rights reserved.

Polymerase chain reaction (PCR) is a powerful tool for nucleic acid amplification and quantification. However, long thermocycling time is a major limitation of the commercial PCR devices in the point-of-care (POC). Herein, we have developed a rapid droplet-based photonic PCR (dpPCR) system, including a gold (Au) nanofilm-based microfluidic chip and a plasmonic photothermal cycler. The chip is fabricated by adding mineral oil to uncured polydimethylsiloxane (PDMS) to suppress droplet evaporation in PDMS microfluidic chips during PCR thermocycling. A PDMS to gold bonding technique using a double-sided adhesive tape is applied to enhance the bonding strength between the oil-added PDMS and the gold nanofilm. Moreover, the gold nanofilm excited by two light-emitting diodes (LEDs) from the top and bottom sides of the chip provides fast heating of the PCR sample to 230 °C within 100 s. Such a design enables 30 thermal cycles from 60 to 95 °C within 13 min with the average heating and cooling rates of 7.37 ± 0.27 °C/s and 1.91 ± 0.03 °C/s, respectively. The experimental results demonstrate successful PCR amplification of the alcohol oxidase (AOX) gene using the rapid plasmonic photothermal cycler and exhibit the great performance of the microfluidic chip for droplet-based PCR.

BACKGROUND: Excessive neutrophil inflammation is the hallmark of cystic fibrosis (CF) airway disease. Novel technologies for characterizing neutrophil dysfunction may provide insight into the nature of these abnormalities, revealing a greater mechanistic understanding and new avenues for CF therapies that target these mechanisms. METHODS: Blood was collected from individuals with CF in the outpatient clinic, CF individuals hospitalized for a pulmonary exacerbation, and non-CF controls. Using microfluidic assays and advanced imaging technologies, we characterized 1) spontaneous neutrophil migration using microfluidic motility mazes, 2) neutrophil migration to and phagocytosis of Staphylococcal aureus particles in a microfluidic arena, 3) neutrophil swarming on Candida albicans clusters, and 4) Pseudomonas aeruginosa-induced neutrophil transepithelial migration using micro-optical coherence technology (µOCT). RESULTS: Participants included 44 individuals: 16 Outpatient CF, 13 Hospitalized CF, and 15 Non-CF individuals. While no differences were seen with spontaneous migration, CF neutrophils migrated towards S. aureus particles more quickly than non-CF neutrophils (p

We developed a low-cost polymer-film spiral inertial microfluidic device for the effective size-dependent separation of malignant tumor cells. The device was fabricated in polymer films by rapid laser cutting and chemical bonding. After fabricating the prototype device, the separation performance of our device was evaluated using particles and cells. The effects of operational flow rate, cell diameter, and cell concentration on the separation performance were explored. Our device successfully separated tumor cells from polydisperse white blood cells according to their different migration modes and lateral positions. Then, the separation of rare cells was carried out using the high-concentration lysed blood spiked with 200 tumor cells. Experimental results showed that 83.90% of the tumor cells could be recovered, while 99.87% of white blood cells could be removed. We successfully employed our device for processing clinical pleural effusion samples from patients with advanced metastatic breast cancer. Malignant tumor cells with an average purity of 2.37% could be effectively enriched, improving downstream diagnostic accuracy. Our device offers the advantages of label-free operation, low cost, and fast fabrication, thus being a potential tool for effective cell separation.

During oncogenesis, several alterations occur within cells, one of them being the abnormal glycosylation of proteins, resulting in the formation of glycoproteins with aberrant glycan structures, which can be secreted into the blood stream. Their specific association to tumour cells makes them useful indicators (biomarkers) of the oncogenic process and their detection in blood can be employed in different stages of tumour development for early detection, prognosis and therapeutic drug monitoring. Due to the importance of detecting cancer-associated glycoproteins with aberrant glycosylation in blood or serum, analytical methodologies with improved performance are required to ameliorate the laboratorial tests currently used for the detection of these analytes. Microfluidics was created to facilitate the implementation of simple and point-of-care analysis, away from a centralized laboratory. The massive use of microfluidic systems in clinical settings can be seen in pregnancy tests and diabetes control, for example. But what about other clinical domains, such as the detection of glycoproteins with aberrant glycans secreted by tumour cells? Are microfluidic systems helpful in this case? This review analyses the requirements of a microfluidic assay for the detection of low-abundant blood/serum cancer-associated glycoproteins with abnormal glycans and the progresses that have been made in the last years to develop integrated microfluidic devices for this particular application. The diverse microfluidic systems found in literature present, in general, the same analytical performance as the conventional assays but have additional advantages, namely a reduction in assay times, a decrease of sample and reagent consumption and lower costs. The review will also focus on the improvements that are still needed for better biosensing of this type of cancer biomarkers using microfluidic devices.

Endothelial cells adhere to one another through junctional structures formed by intercellular adhesion molecules. These intercellular proteins regulate barrier function in response to the hemodynamic shear rate and enable the selective passage of solutes and fluids across the endothelium. After endovascular device implantation, the endothelial barrier is compromised and becomes discontinuous, which increases permeability, allowing transmigration of leukocytes and lipoproteins and leading to the accumulation of lipid-laden foamy macrophages in the subendothelial space. Drug-coated bioresorbable vascular scaffold implants have been associated with unexpected thrombotic complications, which were not predicted in animals because of dissimilarities in endothelial regeneration and realignment between animals and humans. The development of a microengineered, microfluidics-based system of patterned channels lined with human endothelial and smooth muscle cells perfused with blood allows for the evaluation of endothelial function and barrier integrity. This review highlights the translational potential of vasculature-on-chip, which recreates the microphysiological milieu to evaluate the impact of drug-eluting bioresorbable vascular scaffolds on endothelial barrier integrity and to characterize polymer biodegradation behavior and drug release kinetic profiles over time.

Timely and rapid detection of biomarkers is extremely important for the diagnosis and treatment of diseases. However, going to the hospital to test biomarkers is the most common way. People need to spend a lot of money and time on various tests for potential disease detection. To make the detection more convenient and affordable, we propose a paper-based aptasensor platform in this work. This device is based on a cellulose paper, on which a three-electrode system and microfluidic channels are fabricated. Meanwhile, novel nanomaterials consisting of amino redox graphene/thionine/streptavidin-modified gold nanoparticles/chitosan are synthesized and modified on the working electrode of the device. Through the biotin-streptavidin system, the aptamer whose 5'end is modified with biotin can be firmly immobilized on the electrode. The detection principle is that the current generated by the nanomaterials decreases proportionally to the concentration of targets owing to the combination of the biomarker and its aptamer. 17β-Estradiol (17β-E2), as one of the widely used diagnostic biomarkers of various clinical conditions, is adopted for verifying the performance of the platform. The experimental results demonstrated that this device enables the determination of 17β-E2 in a wide linear range of concentrations of 10 pg mL-1 to 100 ng mL-1 and the limit of detection is 10 pg mL-1 (S/N = 3). Moreover, it enables the detection of targets in clinical serum samples, demonstrating its potential to be a disposable and convenient integrated platform for detecting various biomarkers.

Chemotactic bacteria sense and respond to temporal and spatial gradients of chemical cues in their surroundings. This phenomenon plays a critical role in many microbial processes such as groundwater bioremediation, microbially enhanced oil recovery, nitrogen fixation in legumes, and pathogenesis of the disease. Chemical heterogeneity in these natural systems may produce numerous competing signals from various directions. Predicting the migration behavior of bacterial populations under such conditions is necessary for designing effective treatment schemes. In this study, experimental studies and mathematical models are reported for the chemotactic response of Escherichia coli to a combination of attractant (α-methylaspartate) and repellent (NiCl2 ), which bind to the same transmembrane receptor complex. The model describes the binding of chemoeffectors and phosphorylation of the kinase in the signal transduction mechanism. Chemotactic parameters of E. coli (signaling efficiency σ , stimuli sensitivity coefficient γ , and repellent sensitivity coefficient κ ) were determined by fitting the model with experimental results for individual stimuli. Interestingly, our model naturally identifies NiCl2 as a repellent for κ>1 . The model is capable of describing quantitatively the response to the individual attractant and repellent, and correctly predicts the change in direction of bacterial population migration for competing stimuli with a twofold increase in repellent concentration.

Sorption (i.e., adsorption and absorption) of small-molecule compounds to polydimethylsiloxane (PDMS) is a widely acknowledged phenomenon. However, studies to date have largely been conducted under atypical conditions for microfluidic applications (lack of perfusion, lack of biological fluids, etc.), especially considering biological studies such as organs-on-chips where small-molecule sorption poses the largest concern. Here, we present an in-depth study of small-molecule sorption under relevant conditions for microphysiological systems, focusing on a standard geometry for biological barrier studies that find application in pharmacokinetics. We specifically assess the sorption of a broad compound panel including 15 neuropsychopharmaca at in vivo concentration levels. We consider devices constructed from PDMS as well as two material alternatives (off-stoichiometry thiol–ene–epoxy, or tape/polycarbonate laminates). Moreover, we study the much neglected impact of peristaltic pump tubing, an essential component of the recirculating systems required to achieve in vivo-like perfusion shear stresses. We find that the choice of the device material does not have a significant impact on the sorption behavior in our barrier-on-chip-type system. Our PDMS observations in particular suggest that excessive compound sorption observed in prior studies is not sufficiently described by compound hydrophobicity or other suggested predictors. Critically, we show that sorption by peristaltic tubing, including the commonly utilized PharMed BPT, dominates over device sorption even on an area-normalized basis, let alone at the typically much larger tubing surface areas. Our findings highlight the importance of validating compound dosages in organ-on-chip studies, as well as the need for considering tubing materials with equal or higher care than device materials. QC 20211020

We present a novel concept for the controlled trapping and releasing of beads and cells in a PDMS microfluidic channel without obstacles present around the particle or in the channel. The trapping principle relies on a two-level microfluidic configuration: a top main PDMS channel interconnected to a buried glass microchannel using round vias. As the fluidic resistances rule the way the liquid flows inside the channels, particles located in the streamlines passing inside the buried level are immobilized by the round via with a smaller diameter, leaving the object motionless in the upper PDMS channel. The particle is maintained by the difference of pressure established across its interface and acts as an infinite fluidic resistance, virtually cancelling the subsequent buried fluidic path. The pressure is controlled at the outlet of the buried path and three modes of operation of a trap are defined: idle, trapping and releasing. The pressure conditions for each mode are defined based on the hydraulic–electrical circuit equivalence. The trapping of polystyrene beads in a compact array of 522 parallel traps controlled by a single pressure was demonstrated with a trapping efficiency of 94%. Pressure conditions necessary to safely trap cells in holes of different diameters were determined and demonstrated in an array of 25 traps, establishing the design and operation rules for the use of planar hydrodynamic traps for biological assays., A new process for the fabrication of two superposed layers of microfluidic channels connected by vias is used to trap and release particles in a transparent chip. Parallel manipulation of beads is studied and the rules for cell trapping are defined.

Fractionating whole blood and separating its constituent components one from another is an essential step in many clinical applications. Currently blood sample handling and fractionation processes remain a predominantly manual task that require well-trained operators to produce reliable and reproducible results. Herein, we demonstrate an advanced on-chip whole human blood fractionation and cell isolation process combining (i) an aqueous two-phase system (ATPS) to create complex separation layers with (ii) a centrifugal microfluidic platform (PowerBlade) with active pneumatic pumping to control and automate the assay. We use a polyethylene glycol (PEG) and dextran (DEX) mixture as the two-phase density gradient media and our automated centrifugal microfluidic platform to fractionate blood samples. Different densities of precisely tuned PEG–DEX solutions were tested to match each of the cell types typically targeted during blood fractionation applications. By employing specially designed microfluidic devices, we demonstrate the automation of the following steps: loading of a whole blood sample on-chip, layering of the blood on the ATPS solution, blood fractionation, precise radial repositioning of the fractionated layers, and finally extraction of multiple, selected fractionated components. Fractionation of up to six distinct layers is shown: platelet-rich plasma, buffy coat, PEG, DEX with neutrophils, red blood cells (RBCs) and high density gradient media (HDGM). Furthermore, through controlled dispensing of HDGM to the fractionation chamber, we show that each of the fractionated layers can be repositioned radially, on-the-fly, without disturbing the interfaces, allowing precise transfer of target fractions and cell types into external vials via a chip-to-world interface. Cell counting analysis and cell viability studies showed equivalence to traditional, manual methods. An overall cell viability greater than 90% of extracted cells demonstrates that the proposed approach is suitable for cell isolation applications. This proof-of-principle demonstration highlights the utility of the proposed system for automated whole blood fractionation and isolation for blood cell applications. We anticipate that the proposed approach will be a useful tool for many clinical applications such as standard cell isolation procedures and other bioanalytical assays (e.g., circulating tumor cells, and cell and gene therapy).

Enzyme-linked immunosorbent assays (ELISA), as one of the most used immunoassays, have been conducted ubiquitously in hospitals, research laboratories, etc. However, the conventional ELISA procedure is usually laborious, occupies bulky instruments, consumes lengthy operation time, and relies considerably on the skills of technicians, and such limitations call for innovations to develop a fully automated ELISA platform. In this paper, we have presented a system incorporating a robotic-microfluidic interface (RoMI) and a modular hybrid microfluidic chip that embeds a highly sensitive nanofibrous membrane, referred to as Robotic ELISA, to achieve human-free sample-to-answer ELISA tests in a fully programmable and automated manner. It carries out multiple bioanalytical procedures to replace the manual steps involved in classic ELISA operations, including the pneumatically driven high-precision pipetting, efficient mixing and enrichment enabled by back-and-forth flows, washing, as well as integrated machine vision for colorimetric readout. The Robotic ELISA platform has achieved a low limit of detection (LOD) of 0.1 ng/mL in the detection of a low sample volume (15 μL) of chloramphenicol (CAP) within 20 min without human intervention, which is significantly faster than that of the conventional ELISA procedure. Benefiting from its modular design and automated operations, the Robotic ELISA platform has great potential to be deployed for a broad range of detections in various resource-limited settings or high-risk environments, where human involvement needs to be minimized, while the testing timeliness, consistency and sensitivity are all desired.

Biomedical diagnostics based on microfluidic devices have the potential to significantly benefit human health; however, the manufacturing of microfluidic devices is a key limitation to their widespread adoption. Outbreaks of infectious disease continue to demonstrate the need for simple, sensitive, and translatable tests for point-of-care use. Additive manufacturing (AM) is an attractive alternative to conventional approaches for microfluidic device manufacturing based on injection molding; however, there is a need for development and validation of new AM process capabilities and materials that are compatible with microfluidic diagnostics. In this paper, we demonstrate the development and characterization of AM cartridges using continuous liquid interface production (CLIP) and investigate process characteristics and capabilities of the AM microfluidic device manufacturing. We find that CLIP accurately produces microfluidic channels as small as 400 μm and that it is possible to routinely produce fluid channels as small as 100 μm with high repeatability. We also developed a loop-mediated isothermal amplification (LAMP) assay for detection of E. coli from whole blood directly on the CLIP-based AM microfluidic cartridges, with a 50 cfu/μL limit of detection, validating the use of CLIP processes and materials for pathogen detection. The portable diagnostic platform presented in this paper could be used to investigate and validate other AM processes for microfluidic diagnostics and could be an important component of scaling up the diagnostics for current and future infectious diseases and pandemics.

The influence of Poiseuille flow on cell viability has applications in the areas of cancer metastasis, lab-on-a-chip devices and flow cytometry. Indeed, retaining cell viability is important in the emerging field of adoptive cell therapy, as cells need to be returned to patients’ bodies, while the viability of other cells, which are perhaps less accustomed to suspension in a fluidic environment, is important to retain in flow cytometers and other such devices. Despite this, it is unclear how Poiseuille flow affects cell viability. Following on from previous studies which investigated the viability and inertial positions of circulating breast cancer cells in identical flow conditions, this study investigated the influence that varying flow rate, and the corresponding Reynolds number has on the viability of a range of different circulating cells in laminar pipe flow including primary T-cells, primary fibroblasts and neuroblastoma cells. It was found that Reynolds numbers as high as 9.13 had no effect on T-cells while the viabilities of neuroblastoma cells and intestinal fibroblasts were significantly reduced in comparison. This indicates that in vitro flow devices need to be tailored to cell-specific flow regimes.

Many plant processes occur in the context of and in interaction with a surrounding matrix such as soil (e.g. root growth and root–microbe interactions) or surrounding tissues (e.g. pollen tube growth through the pistil), making it difficult to study them with high-resolution optical microscopy. Over the past decade, microfabrication techniques have been developed to produce experimental systems that allow researchers to examine cell behavior in microstructured environments that mimic geometrical, physical and/or chemical aspects of the natural growth matrices and that cannot be generated using traditional agar plate assays. These microfabricated environments offer considerable design flexibility as well as the transparency required for high-resolution, light-based microscopy. In addition, microfluidic platforms have been used for various types of bioassays, including cellular force assays, chemoattraction assays and electrotropism assays. Here, we review the recent use of microfluidic devices to study plant cells and organs, including plant roots, root hairs, moss protonemata and pollen tubes. The increasing adoption of microfabrication techniques by the plant science community may transform our approaches to investigating how individual plant cells sense and respond to changes in the physical and chemical environment.

The development of assays for protein biomarkers in complex matrices is a demanding task that still needs implementation of new approaches. Antibodies as capture agents have been largely used in bioassays but their low stability, low-efficiency production, and cross-reactivity in multiplex approaches impairs their larger applications. Instead, synthetic peptides, even with higher stability and easily adapted amino acid sequences, still remain largely unexplored in this field. Here, we provide a proof-of-concept of a microfluidic device for direct detection of biomarker overexpression. The multichannel microfluidic polydimethylsiloxane (PDMS) device was first derivatized with PAA (poly(acrylic acid)) solution. CRP-1, VEGF-114, and ΦG6 peptides were preliminarily tested to respectively bind the biomarkers, C-reactive protein (CRP), vascular endothelial growth factor (VEGF), and tumor necrosis factor-alpha (TNF-α). Each PDMS microchannel was then respectively bioconjugated with a specific peptide (CRP-1, VEGF-114, or ΦG6) to specifically capture CRP, VEGF, and TNF-α. With such microdevices, a fluorescence bioassay has been set up with sensitivity in the nanomolar range, both in buffered solution and in human serum. The proposed multiplex assay worked with a low amount of sample (25 μL) and detected biomarker overexpression (above nM concentration), representing a noninvasive and inexpensive screening platform.

Microphysiological organ-on-chip models offer the potential to improve the prediction of drug safety and efficacy through recapitulation of human physiological responses. The importance of including multiple cell types within tissue models has been well documented. However, the study of cell interactions in vitro can be limited by complexity of the tissue model and throughput of current culture systems. Here, we describe the development of a co-culture microvascular model and relevant assays in a high-throughput thermoplastic organ-on-chip platform, PREDICT96. The system consists of 96 arrayed bilayer microfluidic devices containing retinal microvascular endothelial cells and pericytes cultured on opposing sides of a microporous membrane. Compatibility of the PREDICT96 platform with a variety of quantifiable and scalable assays, including macromolecular permeability, image-based screening, Luminex, and qPCR, is demonstrated. In addition, the bilayer design of the devices allows for channel- or cell type-specific readouts, such as cytokine profiles and gene expression. The microvascular model was responsive to perturbations including barrier disruption, inflammatory stimulation, and fluid shear stress, and our results corroborated the improved robustness of co-culture over endothelial mono-cultures. We anticipate the PREDICT96 platform and adapted assays will be suitable for other complex tissues, including applications to disease models and drug discovery.

We present a microfluidic device for selective separation and extraction of molecules based on their diffusivity. The separation relies on electroosmotically-driven bidirectional flows in which high diffusivity species experience a net-zero velocity, and lower diffusivity species are advected to a collection reservoir. The device can operate continuously and is suitable for processing low sample volumes. Using several model systems, we showed that the extraction efficiency of the system is maintained at more than 90% over tens of minutes, with a purity of more than 99%. We demonstrate the applicability of the device to the extraction of genomic DNA from short DNA fragments.

Alpha-fetoprotein (AFP) is an important disease biomarker, relating to cancers such as hepatocarcinomas and gastric cancer. However, traditional methods are time-consuming, relied on bulky instruments and trained professionals, cannot satisfy the demand for low cost and point-of-care testing (POCT). In this study, a power-free POCT device was developed for the rapid and low-cost detection of AFP via one-sampling. Based on the principle of sandwich immunofluorescence, the chip is capable of automatically accomplishing on-chip mixing, labeling and capturing procedures, which only require that operator add 40 μL sample into the chip one time. The proposed device is capable of sensitively detecting human AFP in FBS with a dynamic range of 10 - 1000 ng/mL and LOD (1.88 ng/mL) within a short time of 3 min. Predictably, our method holds a great potential to be applied in the POC diagnostics of proteins, especially for some regions that are resource-limited.

The volumetric bar-chart microfluidic chips (V-Chips) driven by chemical reaction-generated gas provide a promising platform for point-of-care (POC) visual biomarker quantitation. However, multiple limitations are encountered in conventional V-Chips, such as costly and complex chip fabrication, complicated assembly, and imprecise controllability of gas production. Herein, we introduced nanomaterial-mediated photothermal effects to V-Chips, and for the first time developed a new type of V-Chip, photothermal bar-chart microfluidic chip (PT-Chip), for visual quantitative detection of biochemicals without any bulky and costly analytical instruments. Immunosensing signals were converted to visual readout signals via photothermal effects, the on-chip bar-chart movements, enabling quantitative biomarker detection on a low-cost polymer hybrid PT-Chip with on-chip scale rulers. Four different human serum samples containing prostate-specific antigen (PSA) as a model analyte were detected simultaneously using the PT-Chip, with the limit of detection of 2.1 ng/mL, meeting clinical diagnostic requirements. Although no conventional signal detectors were used, it achieved comparable detection sensitivity to absorbance measurements with a microplate reader. The PT-Chip was further validated by testing human whole blood without the color interference problem, demonstrating good analytical performance of our method even in complex matrixes and thus the potential to fill a gap in current clinical diagnostics that is incapable of testing whole blood. This new PT-Chip driven by nanomaterial-mediated photothermal effects opens a new horizon of microfluidic platforms for instrument-free diagnostics at the point of care.

Tissues are complex mixtures of different cell subtypes, and this diversity is increasingly characterized using high-throughput single cell analysis methods. However, these efforts are hindered, as tissues must first be dissociated into single cell suspensions using methods that are often inefficient, labor-intensive, highly variable, and potentially biased towards certain cell subtypes. Here, we present a microfluidic platform consisting of three tissue processing technologies that combine tissue digestion, disaggregation, and filtration. The platform is evaluated using a diverse array of tissues. For kidney and mammary tumor, microfluidic processing produces 2.5-fold more single cells. Single cell RNA sequencing further reveals that endothelial cells, fibroblasts, and basal epithelium are enriched without affecting stress response. For liver and heart, processing time is dramatically reduced. We also demonstrate that recovery of cells from the system at periodic intervals during processing increases hepatocyte and cardiomyocyte numbers, as well as increases reproducibility from batch-to-batch for all tissues., Existing methods for tissue dissociation are inefficient and lead to variable outcomes and biases. Here, the authors present a microfluidic platform that combines digestion, disaggregation and filtration of tissue to allow single cell analysis and RNA sequencing.

An intriguing self-powered cathodic photoelectrochemical (PEC) microfluidic aptasensor with enhanced cathodic photocurrent response is proposed for sensitive detection of prostate-specific antigen (PSA). The self-powered system is constructed by a cadmium sulfide-sensitized zinc oxide nanorod array (CdS/ZnO NA) as a photoanode with an iodide-doped bismuth oxychloride flower-array (I0.2:BiOCI0.8) as a photocathode, which can generate the electrical output under visible light irradiation with no external power supply. In addition, the p-type semiconductor I0.2:BiOCI0.8 with a special internal electric field between the iodide ion layer and the [Bi2O2]2+ layer could increase the cathodic photocurrent response by facilitating the separation of electron/hole pairs under visible light excitation. It is worth noting that dissolved oxygen as an electron acceptor can be reduced by the photogenerated electron to form a superoxide radical (•O2-) in the self-powered cathodic PEC system. The further enhanced cathodic photocurrent response can be achieved by eliminating •O2- that reacts with the luminol anion radical (L•-) to produce chemiluminescence emission, which serves as an inner excitation light source. What is more exciting is that the integration of the photoanode and the photocathode into a microfluidic chip could realize automatic sample injection and detection. On this basis, the proposed aptasensor presents excellent reproducibility and high sensitivity for detecting PSA and exhibits a good linearity range (50 fg·mL-1 to 50 ng·mL-1) with a low detection limit (25.8 fg·mL-1), which opens up a new horizon of potential for sensitively detecting other kinds of disease markers.

Optimal mechanical impact absorbers are reusable and exhibit high specific energy absorption. The forced intrusion of liquid water in hydrophobic nanoporous materials, such as zeolitic imidazolate frameworks (ZIFs), presents an attractive pathway to engineer such systems. However, to harness their full potential, it is crucial to understand the underlying water intrusion and ex-trusion mechanisms under realistic, high-rate deformation conditions. Herein, we report a critical increase of the energy absorption capacity of confined water-ZIF systems at elevated strain rates. Starting from ZIF-8 as proof-of-concept, we demonstrate that this attractive rate depend-ence is generally applicable to cage-type ZIFs but disappears for channel-containing zeolites. Molecular simulations reveal that this phenomenon originates from the intrinsic nanosecond timescale needed for critical-sized water clusters to nucleate inside the nanocages, expediting water transport through the framework. Harnessing this fundamental understanding, design rules are formulated to construct effective, tailorable, and reusable impact energy absorbers for challenging new applications., 35 pages, 6 Figures, 1 Supplementary Information

Bacterial motility in response to chemicals, also called bacterial chemotaxis, is a critical ability to search for the optimal environment to ensure the survival of bacterial species. Recent advances in microbiology have allowed the engineering of bacterial chemotactic properties. Conventional methods for characterizing bacterial motility are not able to fully monitor chemotactic behavior. Developments in microfluidic technology have enabled the designing of new experimental protocols in which spatiotemporal control of the cellular microenvironment can be achieved, and in which bacterial motility can be precisely and quantitatively measured and compared. This review provides an overview of recent developments of and new insights into microfluidic systems for chemotaxis assay.

Red blood cells (RBCs) capability to deliver oxygen (O2) has been routinely measured by P50. Although this defines the ability of RBCs to carry O2 under equilibrium states, it cannot determine the efficacy of O2 delivery in dynamic blood flow. Here, we developed a microfluidic analytical platform (MAP) that isolates single RBCs for assessing transient changes in their O2 release rate. We found that in vivo (biological) and in vitro (blood storage) aging of RBC could lead to an increase in the O2 release rate, despite a decrease in P50. Rejuvenation of stored RBCs (Day 42), though increased the P50, failed to restore the O2 release rate to basal level (Day 0). The temporal dimension provided at the single-cell level by MAP could shed new insights into the dynamics of O2 delivery in both physiological and pathological conditions., Kevin Ziyang Chng et al. develop a microfluidic platform using a fluorescence quenching approach to assess transient changes in oxygen release rate of single red blood cells. They observe that biologically older red blood cells have a faster O2 release rate than younger cells and that storage of blood enhances this release rate.

Microfluidic chips made by traditional materials (glass and silicon) are still important for fluorescence tests, biocompatible experiments, and high temperature applications. However, the majority of the present bonding methods suffer from ultra-clean requirement, complicated fabrication process, and low production efficiency. In the present work, an Electrohydrodynamic printing assist bonding method was proposed. By this method, the ultraviolet-cured-glue dots were printed onto the silicon substrate, and then the patterned glass and silicon substrate can be bonded together at room temperature. The influence of printing condition (nozzle inner-diameter, applied voltage, printing height, and flow rate) on the diameter of printed dot was analyzed by experiments. By the optimized printing condition, the glass-silicon microfluidic chip can be well bonded. The bonding strength and leakage test demonstrated the high bonding quality of the microfluidic chip (bonding strength of 28 MPa and leakage pressure of 3.5 MPa).

Sulfated carbohydrate metabolism is a fundamental process, which occurs in all domains of life. Carbohydrate sulfatases are enzymes that remove sulfate groups from carbohydrates and are essential to the depolymerisation of complex polysaccharides. Despite their biological importance, carbohydrate sulfatases are poorly studied and challenges remain in accurately assessing the activity, specificity and kinetic parameters. Most notably, separation of desulfated products from sulfated substrates is currently a time-consuming process. In this paper, we describe the development of rapid capillary electrophoresis coupled to substrate fluorescence detection as a high-throughput and facile means of analysing carbohydrate sulfatase activity. The approach has utility for the determination of both kinetic and inhibition parameters and is based on existing microfluidic technology coupled to a new synthetic fluorescent 6S-GlcNAc carbohydrate substrate. Furthermore, we compare this technique in terms of both time and resources, to high performance anion exchange chromatography and NMR-based methods, which are the two current ‘gold standards’ for enzymatic carbohydrate sulfation analysis. Our study clearly demonstrates the advantages of mobility shift assays for the quantification of near real-time carbohydrate desulfation by purified sulfatases, and could support the search for small molecule inhibitors of these disease-associated enzymes.One sentence summarySulfatases remove sulfate groups from biomolecules; in this study we report a rapid and robust capillary electrophoresis assay for the quantification of carbohydrate desulfation.

The glycocalyx on tumor cells has been recently identified as an important driver for cancer progression, possibly providing critical opportunities for treatment. Metastasis, in particular, is often the limiting step in the survival to cancer, yet our understanding of how tumor cells escape the vascular system to initiate metastatic sites remains limited. Using an in vitro model of the human microvasculature, we assess here the importance of the tumor and vascular glycocalyces during tumor cell extravasation. Through selective manipulation of individual components of the glycocalyx, we reveal a mechanism whereby tumor cells prepare an adhesive vascular niche by depositing components of the glycocalyx along the endothelium. Accumulated hyaluronic acid shed by tumor cells subsequently mediates adhesion to the endothelium via the glycoprotein CD44. Trans-endothelial migration and invasion into the stroma occurs through binding of the isoform CD44v to components of the sub-endothelial extra-cellular matrix. Targeting of the hyaluronic acid-CD44 glycocalyx complex results in significant reduction in the extravasation of tumor cells. These studies provide evidence of tumor cells repurposing the glycocalyx to promote adhesive interactions leading to cancer progression. Such glycocalyx-mediated mechanisms may be therapeutically targeted to hinder metastasis and improve patient survival., Offeddu et al. employ a microfluidic vascular model to study the effects of selective removal of glycocalyx components from cancer cells. They find that cancer-associated hyaluronic acid and CD44 mediate firm adhesion to endothelial cells and extravasation during metastasis.

Matrix metalloproteinases (MMPs) play an important role in tumor progression. The study of dynamic MMPs activity at the single-cell level can dissect tumor heterogeneity in the time domain and facilitate finding out more efficient clinical solutions for tumor treatment. Due to the fluidity of the carrier oil, the existing droplet-based methods for single-cell MMP analysis rarely have the capability to track proteolytic assays in droplets continuously. Therefore, we describe a thermosetting oil for real-time monitoring of MMP assays in droplets, which can immobilize droplets by transforming into solid after droplet generation. The solidification of this oil can be accomplished in 33 min at 37 °C, basing on the hydrosilation of vinyl silicone oil and hydrosilicone oil without other inducers (e.g. UV, Ca2+). Through monitoring the MMP assays of single cells, the reaction rates can be calculated according to real-time fluorescent curves, showing significant cell heterogeneity in MMP activity. Moreover, the dynamic MMP activity reveals that some of the A549 cells transiently secrete MMP. In conclusion, the thermosetting oil enables immobilize droplets to achieve real-time monitoring of single-cell proteolytic activity without impairing the flexibility of droplet microfluidics and has a potential in other cell-based assays for providing dynamic information at high resolutions.

Compartmentalization of single genes in water-in-oil emulsion droplets is a powerful approach to create millions of reactors for enzyme library selections. When these droplets are formed at ultrahigh throughput in microfluidic devices, their perfect monodispersity allows quantitative enzyme assays with a high precision readout. However, despite its potential for high quality cell-free screening experiments, previous demonstrations of enrichment have never been successfully followed up by actual enzyme library selections in monodisperse microfluidic droplets. Here we develop a three-step workflow separating three previously incompatible steps that thus far could not be carried out at once: first droplet-compartmentalized DNA is amplified by rolling circle amplification; only after completion of this step are reagents for in vitro protein expression and, finally, substrate added via picoinjection. The segmented workflow is robust enough to allow the first in vitro evolution in droplets, improving the protease Savinase that is toxic to E. coli for higher activity and identifying a 5-fold faster enzyme.

Exosomes are the smallest extracellular vesicles present in most of the biological fluids. They are found to play an important role in cell signaling, immune response, tumor metastasis, etc. Studies have shown that these vesicles also have diagnostic and therapeutic roles for which their accurate detection and quantification is essential. Due to the complexity in size and structure of exosomes, even the gold standard methods face challenges. This comprehensive review discusses the various standard methods such as ultracentrifugation, ultrafiltration, size-exclusion chromatography, precipitation, immunoaffinity, and microfluidic technologies for the isolation of exosomes. The principle of isolation of each method is described, as well as their specific advantages and disadvantages. Quantification of exosomes by nanoparticle tracking analysis, flow cytometry, tunable resistive pulse sensing, electron microscopy, dynamic light scattering, and microfluidic devices are also described, along with the applications of exosomes in various biomedical domains.

Saliva and blood plasma are non-Newtonian viscoelastic fluids that play essential roles in the transport of particulate matters (e.g., food and blood cells). However, whether the viscoelasticity of such biofluids alters the dynamics of suspended particles is still unknown. In this study, we report that under pressure-driven microflows of both human saliva and blood plasma, spherical particles laterally migrate and form a focused stream along the channel centerline by their viscoelastic properties. We observed that the particle focusing varied among samples on the basis of sampling times/donors, thereby demonstrating that the viscoelasticity of the human biofluids can be affected by their compositions. We showed that the particle focusing, observed in bovine submaxillary mucin solutions, intensified with the increase in mucin concentration. We expect that the findings from this study will contribute to the understanding of the physiological roles of viscoelasticity of human biofluids.

A polymer-film inertial microfluidic jigsaw (PIMJ) sorter with trapezoidal spiral channels using the jigsaw puzzle method was proposed to realize precise and high-throughput rare cell separation. The PIMJ sorter was fabricated by assembling laser-patterned polymer-film layers of different thicknesses. After illustrating the conceptual design and fabrication process, the effects of the cross-sectional dimension, particle size, and operational flow rate on particle focusing were systematically explored under a broad flow rate range. Then, the separation performances of the PIMJ sorter were characterized using the binary particle mixture and the blood samples spiked with four types of tumor cells. The results indicated that the complete separation of the binary particles with a minimum size difference of 2 μm was successfully realized at a high throughput up to 3000 μL/min. A high recovery ratio of 90.57%-94.14% and a high purity of 48.67%-79.05% were achieved for the separation of rare tumor cells from white blood cells (WBCs). Finally, the PIMJ sorter was successfully employed for separating rare circulating tumor cells (CTCs) from the metastatic breast and lung cancer patients with a capture ratio of 7–226 CTCs per 5 mL sample. The results proved the high sensitivity and high reliability of the PIMJ sorter. The PIMJ sorter is expected to be a potential device for precise CTC separation towards the clinical applications.

Profiling circulating tumour cells (CTCs) in cancer patients' blood samples is critical to understand the complex and dynamic nature of metastasis. This task is challenged by the fact that CTCs are not only extremely rare in circulation but also highly heterogeneous in their molecular programs and cellular functions. Here we report a combinational approach for the simultaneous biochemical and functional phenotyping of patient-derived CTCs, using an integrated inertial ferrohydrodynamic cell separation (i2FCS) method and a single-cell microfluidic migration assay. This combinatorial approach offers unique capability to profile CTCs on the basis of their surface expression and migratory characteristics. We achieve this using the i2FCS method that successfully processes whole blood samples in a tumor cell marker and size agnostic manner. The i2FCS method enables an ultrahigh blood sample processing throughput of up to 2 × 105 cells s-1 with a blood sample flow rate of 60 mL h-1. Its short processing time (10 minutes for a 10 mL sample), together with a close-to-complete CTC recovery (99.70% recovery rate) and a low WBC contamination (4.07-log depletion rate by removing 99.992% of leukocytes), results in adequate and functional CTCs for subsequent studies in the single-cell migration device. For the first time, we employ this new approach to query CTCs with single-cell resolution in accordance with their expression of phenotypic surface markers and migration properties, revealing the dynamic phenotypes and the existence of a high-motility subpopulation of CTCs in blood samples from metastatic lung cancer patients. This method could be adopted to study the biological and clinical value of invasive CTC phenotypes.

Single-cell level analysis of various cellular behaviors has been aided by recent developments in microfluidic technology. Polydimethylsiloxane (PDMS)-based microfluidic devices have been widely used to elucidate cell differentiation and migration under spatiotemporal stimulation. However, microfluidic devices fabricated with PDMS have inherent limitations due to material issues and non-scalable fabrication process. In this study, we designed and fabricated an injection molded microfluidic device that enables real-time chemical profile control. This device is made of polystyrene (PS), engineered with channel dimensions optimized for injection molding to achieve functionality and compatibility with single cell observation. We demonstrated the spatiotemporal dynamics in the device with computational simulation and experiments. In temporal dynamics, we observed extracellular signal-regulated kinase (ERK) activation of PC12 cells by stimulating the cells with growth factors (GFs). Also, we confirmed yes-associated protein (YAP) phase separation of HEK293 cells under stimulation using sorbitol. In spatial dynamics, we observed the migration of NIH 3T3 cells (transfected with Lifeact-GFP) under different spatiotemporal stimulations of PDGF. Using the injection molded plastic devices, we obtained comprehensive data more easily than before while using less time compared to previous PDMS models. This easy-to-use plastic microfluidic device promises to open a new approach for investigating the mechanisms of cell behavior at the single-cell level.

DNA target search is a key step in cellular transactions that access genomic information. How DNA binding proteins combine 3D diffusion, sliding and hopping into an overall search strategy remains poorly understood. Here we report the use of a single molecule DNA tethering method to characterize the target search kinetics of the type II restriction endonuclease NdeI. The measured search rate depends strongly on DNA length as well as salt concentration. Using roadblocks, we show that there are significant changes in the DNA sliding length over the salt concentrations in our study. To explain our results, we propose a model including cycles of 3D and 1D search in which salt concentration modulates the strategy by varying the length of DNA probed per 1D scan. At low salt NdeI makes a single non-specific encounter with DNA followed by an effective and complete 1D scan. At higher salt, NdeI must execute multiple cycles of target search due to the reduced efficacy of 1D search.

Multiplexed protein secretion analysis of single cells is important to understand the heterogeneity of cellular functions and processes in healthy and disease states. However, current single-cell platforms, such as microwell-, microchamber-, or droplet-based assays, suffer from low single-cell occupancy, waste of reagents, limited sensitivity, or inability to perform necessary operations, etc. To overcome these drawbacks, we present an integrated droplet microfluidic device that interfaces with spatially patterned antibody barcodes for multiplexed single-cell secretome analysis. The trapping array of 100 picoliter-sized isolation chambers could achieve >80% single-cell capture efficiency with >90% viability. The single-cell analysis microchip was validated by the detection of four-plexed cytokines, including IL-8, MCP-1, MIP-1b, and TNF-a/IL-10, from unstimulated and lipopolysaccharide (LPS)-stimulated individual human macrophages. We also successfully applied the platform to profile protein secretions of human tumor cell lines and primary/metastatic cancer cells dissociated from cancer patients to observe the secretion heterogeneity among cells. This unique microfluidic platform enables multiplexed secretion assays for static droplet microfluidics, provides a reliable and straightforward workflow for protein secretion assays based on a low number of single cells in a short incubation time (∼4 h), and could have widespread applications for studying secretion-mediated cellular heterogeneity.

We present a quantitative study of the metabolic activity of a single spheroid culture of human cancer cells. NMR (nuclear magnetic resonance) spectroscopy is an ideal tool for observation of live systems due to its non-invasive nature. However, limited sensitivity has so far hindered its application in microfluidic culture systems. We have used an optimised micro-NMR platform to observe metabolic changes from a single spheroid. NMR spectra were obtained by directly inserting microfluidic devices containing spheroids ranging from 150 $$\upmu$$ μ m to 300 $$\upmu$$ μ m in diameter in 2.5 $$\upmu$$ μ L of culture medium into a dedicated NMR probe. Metabolite concentrations were found to change linearly with time, with rates approximately proportional to the number of cells in the spheroid. The results demonstrate that quantitative monitoring of a single spheroid with $$\le$$ ≤ 2500 cells is possible. A change in spheroid size by 600 cells leads to a clearly detectable change in the l-Lactic acid production rate ($$p=3.5\times 10^{-3}$$ p = 3.5 × 10 - 3 ). The consumption of d-Glucose and production of l-Lactic acid were approximately 2.5 times slower in spheroids compared to monolayer culture of the same number of cells. Moreover, while cells in monolayer culture were found to produce l-Alanine and l-Glutamine, spheroids showed slight consumption in both cases.

Extracellular vesicles (EVs) secreted by cells into the bloodstream and other bodily fluids, including exosomes, have been demonstrated to be a class of significant messengers that mediate intercellular communications. Tumor-derived extracellular vesicles are enriched in a selective set of biomolecules from original cells, including proteins, nucleic acids, and lipids, and thus offer a new perspective of liquid biopsy for cancer diagnosis and therapeutic monitoring. Owing to the heterogeneity of their biogenesis, physical properties, and molecular constituents, isolation and molecular characterization of EVs remain highly challenging. Microfluidics provides a disruptive platform for EV isolation and analysis owing to its inherent advantages to promote the development of new molecular and cellular sensing systems with improved sensitivity, specificity, spatial and temporal resolution, and throughput. This review summarizes the state-of-the-art advances in the development of microfluidic principles and devices for EV isolation and biophysical or biochemical characterization, in comparison to the conventional counterparts. We will also survey the progress in adapting the new microfluidic techniques to assess the emerging EV-associated biomarkers, mostly focused on proteins and nucleic acids, for clinical diagnosis and prognosis of cancer. Lastly, we will discuss the current challenges in the field of EV research and our outlook on future development of enabling microfluidic platforms for EV-based liquid biopsy.

Analysis of cellular components at the single-cell level is important to reveal cellular heterogeneity. However, current technologies to isolate individual cells are either label-based or have low performance. Here, we present a novel technique by integrating real-time cellular recognition and microfluidic impact printing (MIP) to isolate single cells with high efficiency and high throughput in a label-free manner. Specifically, morphological characteristics of polystyrene beads and cells, computed by an efficient image processing algorithm, are utilized as selection criteria to identify target objects. Subsequently, each detected single-cell object in the suspension is ejected from the microfluidic channel by impact force. It has been demonstrated that the single-cell isolating system has the ability to encapsulate polystyrene beads in droplets with an efficiency of 95%, while for HeLa cells, this has been experimentally measured as 90.3%. Single-cell droplet arrays are generated at a throughput of 2 Hz and 96.6% of the cells remain alive after isolation. This technology has significant potential in various emerging applications, including single-cell omics, tissue engineering, and cell-line development.

Leukocyte esterase (LE) is a useful marker that can be used in establishing a diagnosis of urinary tract infections (UTIs). The development of a UTI diagnostic method with quantitative determinations of biomarkers across all age groups is becoming more important. In this report, microfluidic resistance sensors based on silver ink (Ag ink) and silver ink mixed with ZnO nanoparticles (Ag-ZnO ink) were synthesized and coated on cellulose paper, namely LE-Ag-μPADs and LE-Ag-ZnO-μPADs, respectively, for the sensitive detection of LE. The microfluidic design increases the precision of data and further allows for quantitative determination and early detection of LE in human urine. The quantification of LE relies on the change in the resistance readout coating with Ag ink as well as Ag-ZnO ink in the detection zone. A mixture of 3-(N-tosyl-l-alaninyloxy)-5-phenylpyrrole (PE) and 1-diazo-2-naphthol-4-sulfonic acid (DAS) was deposited in the sample zone to selectively recognize LE, and the resulting nonconductive products, i.e., azo compounds, further reacted with the Ag ink and Ag-ZnO ink to increase resistance. The quantitative detectable LE concentrations between 2 to 32 (×5.2 U mL-1), i.e. ≈12 to 108 μg L-1, cover the commercial dipstick range of trace, +1 and +2. The minimum detectable concentration of LE in urine was 1 (×5.2 U mL-1). The lower concentrations of LE detectable by LE-Ag-μPADs (1-8 × 5.2 U mL-1) are below the value achieved with the ELISA LE kit. Urine samples from inpatients with indwelling urinary catheters were used, and the LE levels measured by the present device were highly correlated with those determined by a commercial urine analyser.

The integration of membranes in microfluidic devices has been extensively exploited for various chemical engineering and bioengineering applications over the past few decades. To augment the applicability of membrane-integrated microfluidic platforms for biomedical and tissue engineering studies, a biologically friendly fabrication process with naturally occurring materials is highly desired. The in situ preparation of membranes involving interfacial reactions between parallel laminar flows in microfluidic networks, known as the flow-assembly technique, is one of the most biocompatible approaches. Membranes of many types with flexible geometries have been successfully assembled inside complex microchannels using this facile and versatile flow-assembly approach. Chitosan is a naturally abundant polysaccharide known for its pronounced biocompatibility, biodegradability, good mechanical stability, ease of modification and processing, and film-forming ability under near-physiological conditions. Chitosan membranes assembled by flows in microfluidics are freestanding, robust, semipermeable, and well-aligned in microstructure, and show high affinity to bioactive reagents and biological components (e.g. biomolecules, nanoparticles, or cells) that provide facile biological functionalization of microdevices. Here, we discuss the recent developments and optimizations in the flow-assembly of chitosan membranes and chitosan-based membranes in microfluidics. Furthermore, we recapitulate the applications of the chitosan membrane-integrated microfluidic platforms dedicated to biology, biochemistry, and drug release fields, and envision the future developments of this important platform with versatile functions.

Poor dispersibility of curcumin (cur) in aqueous medium and heat instability are common drawbacks preventing its efficiently practical use. Herein, the aim of this work was to reduce the size of cur crystals to the nanoscale through solid dispersion technique and subsequently stabilize them in an amorphous form. In this work, different ratios of pea protein (PP) to cur (6: 1, 12:1, 18:1 and 24:1, w/w) nano-supernatant (NS) in water were prepared via microfluidization. Results showed that particle size, Zeta potential (ZP) and cur concentration of cur in PP-cur NS in optimal conditions reached 357.45 nm, −33.43 mV and 81.68 mg/L, respectively. PP-cur NS showed excellent storage stability within one month and high heat stability of 52.32% at 90 °C after 180 min. Structural analysis including FT-IR, DSC and XRD indicated that cur entered into the hydrophobic pocket of PP by hydrophobic interactions and hydrogen bonds after microfluidization. This study indicated that PP exhibiting as an emulsifier and carrier might significantly reduce the surface tension of NS and in turns prolong their storability.

There is great interest in exploiting van der Waals gaps in layered materials as nanofluidic channels. Graphene oxide (GO) nanosheets are known to spontaneously assemble into stacked planar membranes with transport properties that are highly selective to molecular structure. Use of conventional GO membranes in liquid-phase applications is often limited by low flux values, due to intersheet nanochannel alignment perpendicular to the desired Z-directional transport, which leads to circuitous fluid pathways that are orders of magnitude longer than the membrane thickness. Here we demonstrate an approach that uses compressive instability in Zr-doped GO thin films to create wrinkle patterns that rotate nanosheets to high angles. Capturing this structure in polymer matrices and thin sectioning produce fully dense membranes with arrays of near-vertically aligned nanochannels. These robust nanofluidic devices offer pronounced reduction in fluid path-length, while retaining the high selectivity for water over non-polar molecules characteristic of GO interlayer nanochannels., Vertically stacked graphene oxide sheets are promising structures for molecular sieving technologies. By folding large planar sheets in an accordion-like manner, Liu et al. fabricate a thin robust filter with near-vertically aligned nanochannels geared towards commercial separation membranes.

Purification of bacteria from human blood samples is essential for rapid identification of pathogens by molecular methods, enabling faster and more accurate diagnosis of bloodstream infection than conventional gold standard blood culture methods. The inertial microfluidic method has been broadly studied to isolate biological cells of interest in various biomedical applications due to its label-free and high-throughput advantages. However, because of the bacteria's tininess, which ranges from 0.5 μm to 3 μm, they are challenging to be effectively focused and sorted out in existing inertial microfluidic devices that work well with biological cells larger than 10 μm. Efforts have been made to sort bacterial cells by utilizing extremely small channel dimensions or employing a sheath flow, which thus results in limitations on the throughput and ease of operation. To overcome this challenge, we develop a method that integrates a non-Newtonian fluid with a novel channel design to allow bacteria to be successfully sorted from larger blood cells in a channel dimension of 120 μm × 20 μm without the use of sheath flows. The throughput of this device with four parallel channels is above 400 μL per minute. The real-time polymerase chain reaction (qPCR) analysis indicates that our inertial sorting approach has a nearly 3-fold improvement in pathogen recovery compared with the commonly used lysis-centrifugation method at pathogen abundances as low as 102 cfu mL-1. With the rapid and simple purification and enrichment of bacterial pathogens, the present inertial sorting method exhibits an ability to enhance the fast and accurate molecular diagnosis of bloodstream bacterial infection.

We demonstrate for the first time a fast aptamer generation method based on the screen-printed electrodynamic microfluidic channel device, where a specific aptamer selectively binds to a target protein on channel walls, following recovery and separation. A malaria protein as a model target, Plasmodium vivax lactate dehydrogenase (PvLDH) was covalently bonded to the conductive polymer layer formed on the carbon channel walls to react with the DNA library in a fluid. Then, the AC electric field was symmetrically applied on the channel walls for inducing the specific binding of the target protein to DNA library molecules. In this case, the partitioning efficiency between PvLDH and DNA library in the channel was attained to be 1.67 × 107 with the background of 5.56 × 10-6, which was confirmed using the quantitative polymerase chain reaction (qPCR). The selectively captured DNAs were isolated from the protein and separated in situ to give five aptamers with different sequences by one round cycle. The dissociation constants (Kd) of the selected aptamers were determined employing both electrochemical impedance spectroscopy (EIS) and the fluorescence method. The sensing performance of each aptamer was evaluated for the PvLDH detection after individual immobilization on the screen-printed array electrodes. The most sensitive aptamer revealed a detection limit of 7.8 ± 0.4 fM. The sensor reliability was evaluated by comparing it with other malaria sensors.

Enzyme-linked immunosorbent assay (ELISA) is the gold standard method for protein biomarkers. However, scaling up ELISA for multiplexed biomarker analysis is not a trivial task due to the lengthy procedures for fluid manipulation and high reagent/sample consumption. Herein, we present a highly scalable multiplexed ELISA that achieves a similar level of performance to commercial single-target ELISA kits as well as shorter assay time, less consumption, and simpler procedures. This ELISA is enabled by a novel microscale fluid manipulation method, composable microfluidic plates (cPlate), which are comprised of miniaturized 96-well plates and their corresponding channel plates. By assembling and disassembling the plates, all of the fluid manipulations for 96 independent ELISA reactions can be achieved simultaneously without any external fluid manipulation equipment. Simultaneous quantification of four protein biomarkers in serum samples is demonstrated with the cPlate system, achieving high sensitivity and specificity (∼ pg/mL), short assay time (∼1 h), low consumption (∼5 μL/well), high scalability, and ease of use. This platform is further applied to probe the levels of three protein biomarkers related to vascular dysfunction under pulmonary nanoparticle exposure in rat's plasma. Because of the low cost, portability, and instrument-free nature of the cPlate system, it will have great potential for multiplexed point-of-care testing in resource-limited regions.