Search

Bridging polymer design with catalyst surface science is a promising direction for tuning and optimizing electrochemical reactors that could impact long-term goals in energy and sustainability. Particularly, the interaction between inorganic catalyst surfaces and organic-based ionomers provides an avenue to both steer reaction selectivity and promote activity. Here, we studied the role of imidazolium-based ionomers for electrocatalytic CO2 reduction to CO (CO2R) on Ag surfaces and found that they produce no effect on CO2R activity yet strongly promote the competing hydrogen evolution reaction (HER). By examining the dependence of HER and CO2R rates on concentrations of CO2 and HCO3-, we developed a kinetic model that attributes HER promotion to intrinsic promotion of HCO3- reduction by imidazolium ionomers. We also show that varying the ionomer structure by changing substituents on the imidazolium ring modulates the HER promotion. This ionomer-structure dependence was analyzed via Taft steric parameters and density functional theory calculations, which suggest that steric bulk from functionalities on the imidazolium ring reduces access of the ionomer to both HCO3- and the Ag surface, thus limiting the promotional effect. Our results help develop design rules for ionomer-catalyst interactions in CO2R and motivate further work into precisely uncovering the interplay between primary and secondary coordination in determining electrocatalytic behavior.

Tuning bimetallic effects is a promising strategy to guide catalytic properties. However, the nature of these effects can be difficult to assess and compare due to the convolution with other factors such as the catalyst surface structure and morphology and differences in testing environments. Here, we investigate the impact of atomic-scale bimetallic effects on the electrochemical CO2 reduction performance of Cu-based catalysts by leveraging a systematic approach that unifies protocols for materials synthesis and testing and enables accurate comparisons of intrinsic catalytic activity and selectivity. We used the same physical vapor deposition method to epitaxially grow Cu(100) films decorated with a small amount of noble or base metal atoms and a combination of experimental characterization and first-principles calculations to evaluate their physicochemical and catalytic properties. The results indicate that the metal atoms segregate to under-coordinated Cu sites during physical vapor deposition, suppressing CO reduction to oxygenates and hydrocarbons and promoting competing pathways to CO, formate, and hydrogen. Leveraging these insights, we rationalize bimetallic design principles to improve catalytic selectivity for CO2 reduction to CO, formate, oxygenates, or hydrocarbons. Our study provides one of the most extensive studies on Cu bimetallics for CO2 reduction, establishing a systematic approach that is broadly applicable to research in catalyst discovery.

Selective and stable production of C2 oxygenates from syngas is enabled by a phosphate-passivated mordenite catalyst used in tandem with a commercial Cu/ZnO/AlMgOx catalyst. Unmodified mordenite used in this arrangement is accompanied by substantial hydrocarbon formation and carbon deposition. Therefore, phosphate groups are used to remove or significantly reduce Bronsted acidity in mordenite by capping aluminum sites. Such groups are stable to calcination and catalyst regeneration. Trimethylphosphite is used as a phosphate precursor because it is able to enter the 12 membered-ring pores of mordenite where hydrocarbon formation occurs, but not enter the 8 membered-ring side-pockets, where methanol carbonylation occurs selectively. The catalyst was characterized using X-ray fluorescence, X-ray diffraction, and thermal gravimetric analysis. Optionally, a third bed of Cu/ZnO/AlMgO x catalyst is able to hydrodeoxygenate acetic acid to ethanol. The C2 oxygenate selectivity is over 96% and among the best reported in a single reactor with a syngas feed.

Understanding the differences between reactions driven by elevated temperature or electric potential remains challenging, largely due to materials incompatibilities between thermal catalytic and electrocatalytic environments. We show that Ni, N-doped carbon (NiPACN), an electrocatalyst for the reduction of CO2 to CO (CO2 R), can also selectively catalyze thermal CO2 to CO via the reverse water gas shift (RWGS) representing a direct analogy between catalytic phenomena across the two reaction environments. Advanced characterization techniques reveal that NiPACN likely facilitates RWGS on dispersed Ni sites in agreement with CO2 R active site studies. Finally, we construct a generalized reaction driving-force that includes temperature and potential and suggest that NiPACN could facilitate faster kinetics in CO2 R relative to RWGS due to lower intrinsic barriers. This report motivates further studies that quantitatively link catalytic phenomena across disparate reaction environments.

This work demonstrates that ultrathin (4 nm) tungsten oxide (WO3) coatings on copper gallium selenide (CuGa3Se5) photocathodes have the potential for long-term solar hydrogen evolution. With a combination of a robust 1.84 eV CuGa3Se5 absorber layer, a WO3 protective coating, and a Pt catalyst, we obtain a new durability milestone for any non-silicon photoelectrochemical hydrogen-producing device by passing 21 490 C cm−2 of charge across six weeks of continuously-illuminated chronoamperometric testing under applied bias.

The electrochemical CO2 reduction reaction (CO2RR) using Cu-based catalysts holds great potential for producing valuable multi-carbon products from renewable energy. However, the chemical and structural state of Cu catalyst surfaces during the CO2RR remains a matter of debate. Here, we show the structural evolution of the near-surface region of polycrystalline Cu electrodes under in situ conditions through a combination of grazing incidence X-ray absorption spectroscopy (GIXAS) and X-ray diffraction (GIXRD). The in situ GIXAS reveals that the surface oxide layer is fully reduced to metallic Cu before the onset potential for CO2RR, and the catalyst maintains the metallic state across the potentials relevant to the CO2RR. We also find a preferential surface reconstruction of the polycrystalline Cu surface toward (100) facets in the presence of CO2. Quantitative analysis of the reconstruction profiles reveals that the degree of reconstruction increases with increasingly negative applied potentials, and it persists when the applied potential returns to more positive values. These findings show that the surface of Cu electrocatalysts is dynamic during the CO2RR, and emphasize the importance of in situ characterization to understand the surface structure and its role in electrocatalysis.

Rigorous in situ studies of electrocatalysts are required to enable the design of higher performing materials. Nonplatinum group metals for oxygen reduction reaction (ORR) catalysis containing ligh...

While photoelectrochemical (PEC) solar-to-hydrogen efficiencies have greatly improved over the past few decades, advances in PEC durability have lagged behind. Corrosion of semiconductor photoabsorbers in the aqueous conditions needed for water splitting is a major challenge that limits device stability. In addition, a precious-metal catalyst is often required to efficiently promote water splitting. Herein, we demonstrate unassisted water splitting using a nonprecious metal molybdenum disulfide nanomaterial catalytic protection layer paired with a GaInAsP/GaAs tandem device. This device was able to achieve stable unassisted water splitting for nearly 12 h, while a sibling sample with a PtRu catalyst was only stable for 2 h, highlighting the advantage of the nonprecious metal catalyst. In situ optical imaging illustrates the progression of macroscopic degradation that causes device failure. In addition, this work compares unassisted water splitting devices across the field in terms of the efficiency and stability, illustrating the need for improved stability.

The recirculation of gases in a sealed reactor system is a broadly useful method in catalytic and electrocatalytic studies. It is especially relevant when a reactant gas reacts slowly with respect to residence time in a catalytic reaction zone and when mass transport control through the reaction zone is necessary. This need is well illustrated in the field of electrocatalytic N2 reduction, where the need for recirculation of 15N2 has recently become more apparent. Herein, we describe the design, fabrication, use, and specifications of a lubricant-free, readily constructed recirculating pump fabricated entirely from glass and inert polymer (poly(ether ether ketone) (PEEK), poly(tetrafluoroethylene) (PTFE)) components. Using these glass and polymer components ensures chemical compatibility between the piston pump and a wide range of chemical environments, including strongly acidic and organic electrolytes often employed in studies of electrocatalytic N2 reduction. The lubricant-free nature of the pump and the presence of components made exclusively of glass and PEEK/PTFE mitigate contamination concerns associated with recirculating gases saturated with corrosive or reactive vapors for extended periods. The gas recirculating glass pump achieved a flow rate of >500 mL min-1 N2 against atmospheric pressure at 15 W peak power input and >100 mL min-1 N2 against a differential pressure of +6 in. H2O (∼15 mbar) at 10 W peak power input.

Utilizing electrochemical conversion of CO(2) into hydrocarbons and oxygenates is envisioned as a promising path towards closing the carbon cycle in modern technology. To this day, however, the exact reaction mechanisms towards the plethora of single and multi-carbon products on Cu electrodes are still disputed. This uncertainty even extends to the rate-limiting step of the respective reactions. Since multi-carbon products do not show a dependence on the electrolyte pH in neutral and alkaline media, CO dimerization on the Cu surface has been proposed as the rate-limiting step. However, other elementary steps would lead to the same pH dependence, namely the proton-electron transfer to *CO followed by subsequent coupling or the protonation of the *OCCO dimer. The pH dependence of methane production on the other hand suggests that the rate limiting step is located beyond the first proton-electron transfer to *CO. In order to conclusively identify the rate limiting steps in CO reduction, we analyzed the mechanisms on the basis of constant potential DFT calculations, CO reduction experiments on Cu at varying pH values (3 - 13) and fundamental rate theory. We find that, even in acidic media, the reaction rate towards multi-carbon products is nearly unchanged on an SHE potential scale, which indicates that its rate limiting step does not involve a proton donor. Hence, we deduce that the rate limiting step can indeed only consist of the coupling of two CO molecules on the surface, both in acidic and alkaline conditions. For methane, on the other hand, the rate-limiting step changes with the electrolyte pH from the first protonation step in acidic/neutral conditions to a later step in alkaline conditions. Finally, based on an in-depth kinetic analysis, we conclude that the pathway towards CH4 involving a surface combination of *CO and *H is unlikely, since it is unable to reproduce the measured current densities and Tafel slopes.

Silver-based bimetallic catalysts for the oxygen reduction reaction (ORR) are promising for a wide variety of renewable energy technologies, including alkaline fuel cells and metal-air batteries. T...

Nitrates from agricultural runoff and industrial waste streams are a notorious waste product and hazardous pollutant. Traditional electrochemical water remediation approaches aim to solve this prob...

Ni,N-doped carbon catalysts have shown promising catalytic performance for CO2 electroreduction (CO2 R) to CO; this activity has often been attributed to the presence of nitrogen-coordinated, single Ni atom active sites. However, experimentally confirming Ni-N bonding and correlating CO2 reduction (CO2 R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile-derived Ni,N-doped carbon electrocatalysts (Ni-PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO2 R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X-ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square-planar geometry that strongly resembles the active sites of molecular metal-porphyrin catalysts.

Silicon has shown promise for use as a small band gap (1.1 eV) absorber material in photoelectrochemical (PEC) water splitting. However, the limited stability of silicon in acidic electrolyte requires the use of protection strategies coupled with catalysts. Herein, spin coating is used as a versatile method to directly coat silicon photoanodes with an IrOₓ oxygen evolution reaction (OER) catalyst, reducing the processing complexity compared to conventional fabrication schemes. Biphasic strontium chloride/iridium oxide (SrCl₂:IrOₓ) catalysts are also developed, and both catalysts form photoactive junctions with silicon and demonstrate highphotoanode activity. The iridium oxide photoanode displays a photocurrent onset at 1.06 V vs reversible hydrogen electrode (RHE), while the SrCl₂:IrOₓ photoanode onsets earlier at 0.96 V vs RHE. The differing potentials are consistent with the observed photovoltages of 0.43 and 0.53 V for the IrOₓ and SrCl₂:IrOₓ, respectively. By measuring the oxidation of a reversible redox couple, Fe(CN)₆ ³¯⁄⁴¯, we compare the charge carrier extraction of the devices and show that the addition of SrCl₂ to the IrOx catalyst improves the silicon−electrolyte interface compared to pure IrOₓ. However, the durability of the strontium-containing photoanode remains a challenge, with its photocurrent density decreasing by 90% over 4 h. The IrOₓ photoanode, on the other hand, maintained a stable photocurrent density over this timescale. Characterization of the as-prepared and post-tested material structure via Auger electron spectroscopy identifies catalyst film cracking and delamination as the primary failure modes. We propose that improvements to catalyst adhesion should further the viability of spin coating as a technique for photoanode preparation.

The electrochemical oxygen evolution reaction (OER) is the half-cell reaction for many clean-energy production technologies, including water electrolyzers and metal-air batteries. However, its sluggish kinetics hinders the performance of those technologies, impeding them from broader implementation. Recently, we reported the use of zirconium phosphate (ZrP) as a support for transition metal catalysts for the oxygen evolution reaction (OER). These catalysts achieve promising overpotentials with high mass activities. Herein, we synthesize ZrP structures with controlled morphology: hexagonal platelets, rods, cubes, and spheres, and subsequently modify them with Co(ii) and Ni(ii) cations to assess their electrochemcial OER behavior. Through inductively coupled plasma mass-spectrometry measurements, the maximum ion exchange capacity is found to vary based on the morphology of the ZrP structure and cation selection. Trends in geometric current density and mass activity as a function of cation selection are discussed. We find that the loading and coverage of cobalt and nickel species on the ZrP supports are key factors that control OER performance.

We demonstrate the translation of a low-cost, non-precious metal cobalt phosphide (CoP) catalyst from 1 cm2 lab-scale experiments to a commercial-scale 86 cm2 polymer electrolyte membrane (PEM) electrolyser. A two-step bulk synthesis was adopted to produce CoP on a high-surface-area carbon support that was readily integrated into an industrial PEM electrolyser fabrication process. The performance of the CoP was compared head to head with a platinum-based PEM under the same operating conditions (400 psi, 50 °C). CoP was found to be active and stable, operating at 1.86 A cm-2 for >1,700 h of continuous hydrogen production while providing substantial material cost savings relative to platinum. This work illustrates a potential pathway for non-precious hydrogen evolution catalysts developed in past decades to translate to commercial applications.

Iridium-based mixed metal oxide phases have been shown as promising electrocatalysts for the oxygen evolution reaction (OER) because of their ability to stabilize unique Ir-based surface sites with...

Improved electrochemical oxygen evolution catalysis is crucial for many clean-energy production technologies. Recently, transition-metal-modified zirconium phosphate (ZrP) catalysts were studied for the oxygen evolution reaction (OER) in alkaline media. These studies suggest that the OER occurs preferentially on the surface of the layered ZrP nanoparticles rather than the interlayer gallery. Herein, ZrP nanoparticles are exfoliated with tetrabutylammonium hydroxide (TBA+OH–) to further expose surface sites which are subsequently modified with Co and Ni cations by an ion-exchange reaction. Because of the greater surface accessibility of the exfoliated ZrP support, higher loadings of catalyst material were achieved along with improved site access for catalysis. These new composite materials have improved geometric area normalized overpotentials than metal-adsorbed ZrP nanoparticles without exfoliation. Specifically, Co-modified and Ni-modified exfoliated ZrP show a reduction in overpotential at a current de...

CO2 reduction by combined electro- and bio-catalytic reactions is a promising technology platform for sustainable production of chemicals from CO2 and electricity. While heterogeneous electrocatalysts can reduce CO2 to a variety of organic compounds at relatively high reaction rates, these catalysts have limitations achieving high selectivity for any single product beyond CO. Conversely, microbial CO2 reduction pathways proceed at high selectivity; however, the rates at bio-cathodes using direct electron supply via electricity are commonly limiting. Here we demonstrate the use of non-precious metal cathodes that produce hydrogen in situ to support microbial CO2 reduction to C1 and C2 compounds. CoP, MoS2 and NiMo cathodes perform durable hydrogen evolution under biologically relevant conditions, and the integrated system achieves coulombic efficiencies close to 100% without accumulating hydrogen. Moreover, the one-reactor hybrid platform is successfully used for efficient acetate production from electricity and CO2 by microbes previously reported to be inactive in bioelectrochemical systems. The reduction of CO2 by electro- and biocatalysis offers a promising route to the sustainable production of chemicals and fuels. Here, the integration of methanogenic or homoacetogenic microbes with earth-abundant electrodes allows robust, rapid, and selective CO2 reduction with coulombic efficiencies of up to 100%.

The development of inexpensive and abundant catalysts with high activity, selectivity, and stability for the oxygen reduction reaction (ORR) is imperative for the widespread implementation of fuel cell devices. Herein, we present a combined theoretical-experimental approach to discover and design first-row transition metal antimonates as promising electrocatalytic materials for the ORR. Theoretically, we identify first-row transition metal antimonates – MSb2O6, where M = Mn, Fe, Co, and Ni – as non-precious metal catalysts with promising oxygen binding energetics, conductivity, thermodynamic phase stability and aqueous stability. Among the considered antimonates, MnSb2O6 shows the highest theoretical ORR activity based on the 4e− ORR kinetic volcano. Experimentally, nanoparticulate transition metal antimonate catalysts are found to have a minimum of a 2.5-fold enhancement in intrinsic mass activity (on transition metal mass basis) relative to the corresponding transition metal oxide at 0.7 V vs RHE in 0.1 M KOH. MnSb2O6 is the most active catalyst under these conditions, with a 3.5-fold enhancement on a per Mn mass activity basis and 25-fold enhancement on a surface area basis over its antimony-free counterpart. Electrocatalytic and material stability are demonstrated over a 5 h chronopotentiometry experiment in the stability window identified by Pourbaix analysis. This study further highlights the stable and electrically conductive antimonate structure as a promising framework to tune the activity and selectivity of non-precious metal oxide active sites for ORR catalysis.

Unique classes of active-site motifs are needed for improved electrocatalysis. Herein, the activity of a new catalyst motif is engineered and isolated for the oxygen evolution reaction (OER) created by nickel–iron transition metal electrocatalysts confined within a layered zirconium phosphate matrix. It is found that with optimal intercalation, confined NiFe catalysts have an order of magnitude improved mass activity compared to more conventional surface-adsorbed systems in 0.1 m KOH. Interestingly, the confined environments within the layered structure also stabilize Fe-rich compositions (90%) with exceptional mass activity compared to known Fe-rich OER catalysts. Through controls and by grafting inert molecules to the outer surface, it is evidenced that the intercalated Ni/Fe species stay within the interlayer during catalysis and serve as the active site. After determining a possible structure (wycherproofite), density functional theory is shown to correlate with the observed experimental compositional trends. It is further demonstrated that the improved activity of this motif is correlated to the Fe and water content/composition within the confined space. This work highlights the catalytic enhancement possibilities available through zirconium phosphate and isolates the activity from the intercalated species versus surface/edge ones, thus opening new avenues to develop and understand catalysts within unique nanoscale chemical environments.

Molybdenum phosphide (MoP) catalyzes the hydrogenation of CO, CO2 , and their mixtures to methanol, and it is investigated as a high-activity catalyst that overcomes deactivation issues (e.g., formate poisoning) faced by conventional transition metal catalysts. MoP as a new catalyst for hydrogenating CO2 to methanol is particularly appealing for the use of CO2 as chemical feedstock. Herein, we use a colloidal synthesis technique that connects the presence of MoP to the formation of methanol from CO2 , regardless of the support being used. By conducting a systematic support study, we see that zirconia (ZrO2 ) has the striking ability to shift the selectivity towards methanol by increasing the rate of methanol conversion by two orders of magnitude compared to other supports, at a CO2 conversion of 1.4% and methanol selectivity of 55.4%. In situ X-ray Absorption Spectroscopy (XAS) and in situ X-ray Diffraction (XRD) indicate that under reaction conditions the catalyst is pure MoP in a partially crystalline phase. Results from Diffuse Reflectance Infrared Fourier Transform Spectroscopy coupled with Temperature Programmed Surface Reaction (DRIFTSTPSR) point towards a highly reactive monodentate formate intermediate stabilized by the strong interaction of MoP and ZrO2 . This study definitively shows that the presence of a MoP phase leads to methanol formation from CO2 , regardless of support and that the formate intermediate on MoP governs methanol formation rate. : © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).

The design and fabrication of lattice-strained platinum catalysts achieved by removing a soluble core from a platinum shell synthesized via atomic layer deposition, is reported. The remarkable catalytic performance for the oxygen reduction reaction (ORR), measured in both half-cell and full-cell configurations, is attributed to the observed lattice strain. By further optimizing the nanoparticle geometry and ionomer/carbon interactions, mass activity close to 0.8 A mgPt-1 @0.9 V iR-free is achievable in the membrane electrode assembly. Nevertheless, active catalysts with high ORR activity do not necessarily lead to high performance in the high-current-density (HCD) region. More attention shall be directed toward HCD performance for enabling high-power-density hydrogen fuel cells.

Ru-based oxygen evolution reaction (OER) catalysts show significant promise for efficient water electrolysis, but rapid degradation poses a major challenge for commercial applications. In this work, we explore several Ru-based pyrochlores (A2Ru2O7, A = Y, Nd, Gd, Bi) as OER catalysts and demonstrate improved activity and stability of catalytic Ru sites relative to RuO2. Furthermore, we combine complementary experimental and theoretical analysis to understand how the A-site element impacts activity and stability under acidic OER conditions. Among the A2Ru2O7 studied herein, we find that a longer Ru-O bond and a weaker interaction of the Ru 4d and O 2p orbitals compared with RuO2 results in enhanced initial activity. We observe that the OER activity of the catalysts changes over time and is accompanied by both A-site and Ru dissolution at different relative rates depending on the identity of the A-site. Pourbaix diagrams constructed using density functional theory (DFT) calculations reveal a driving force for this experimentally observed dissolution, indicating that all compositions studied herein are thermodynamically unstable in acidic OER conditions. Theoretical activity predictions show consistent trends between A-site cation leaching and OER activity. These trends coupled with Bader charge analysis suggest that dissolution exposes highly oxidized Ru sites that exhibit enhanced activity. Overall, using the stability number (molO2 evolved/molRu dissolved) as a comparative metric, the A2Ru2O7 materials studied in this work show substantially greater stability than a standard RuO2 and commensurate stability to some Ir mixed metal oxides. The insights described herein provide a pathway to enhanced Ru catalyst activity and durability, ultimately improving the efficiency of water electrolyzers.

In2O3 has recently emerged as a promising catalyst for methanol synthesis from CO2. In this work, we present the promotional effect of Pd on this catalyst and investigate structure–performance rela...

We demonstrate that applying atomic layer deposition-derived molybdenum disulfide (MoS2) catalytic coatings on copper gallium diselenide (CGSe) thin film absorbers can lead to efficient wide band gap photocathodes for photoelectrochemical hydrogen production. We have prepared a device that is free of precious metals, employing a CGSe absorber and a cadmium sulfide (CdS) buffer layer, a titanium dioxide (TiO2) interfacial layer, and a MoS2 catalytic layer. The resulting MoS2/TiO2/CdS/CGSe photocathode exhibits a photocurrent onset of +0.53 V vs RHE and a saturation photocurrent density of −10 mA cm–2, with stable operation for >5 h in acidic electrolyte. Spectroscopic investigations of this device architecture indicate that overlayer degradation occurs inhomogeneously, ultimately exposing the underlying CGSe absorber.

Photoelectrochemical water splitting is a promising route for sustainable hydrogen production. Herein, we demonstrate a photoelectrode motif that enables a nanostructured large-surface area electrocatalyst without requiring a nanostructured semiconductor surface with the goal of promoting electrocatalysis while minimizing surface recombination. We compare the photoelectrochemical H2 evolution activity of two silicon photocathode nanostructuring strategies: (1) direct nanostructuring of the silicon surface and (2) incorporation of nanostructured zinc oxide to increase the electrocatalyst surface area on planar silicon. We observed that silicon photocathodes that utilized nanostructured ZnO supports outperformed nanostructured silicon electrodes by ∼50 mV at open circuit under 1 sun illumination and demonstrated comparable electrocatalytic activity.

Gallium indium phosphide (GaInP2) is a semiconductor with promising optical and electronic properties to serve as the large bandgap, top junction in a dual absorber tandem solar water splitting device. Poor intrinsic catalytic ability and surface corrosion in aqueous electrolyte remain key obstacles. Significant progress has been made developing thin-film protection layers and active catalysts for photoelectrochemical devices, but combining these into a catalytic protection layer that can provide long-term stability without sacrificing performance has proven difficult due, in large part, to challenges in developing active and stable interfaces. In this work, we demonstrate that a nanoscale molybdenum disulfide (MoS2) film functions both as an effective protection layer and excellent hydrogen evolution catalyst for GaInP2 photocathodes, with only a ∼10% loss in initial light-limited current density after 100 h, and a photocurrent onset potential better than that of the same state-of-the-art device with a platinum–ruthenium catalyst. Using transient photoreflectance spectroscopy, we probed the carrier dynamics of these photocathodes and show that the MoS2 coated device exhibits improved electron transfer at the surface interface compared to the PtRu catalyzed device. These MoS2 protected devices are among the most active and stable single-absorber photocathodes for solar water splitting to date and offer a promising pathway towards generating hydrogen with high efficiency and significant longevity.

Climate change has necessitated the development of technologies that are able to efficiently capture, utilize, and store CO2, creating new opportunities to utilize CO2 as a feedstock to produce fuels and chemicals that are vital to our society. In Nature, Sargent, Peters, Agapie, et al. control microenvironments around Cu electrocatalysts to achieve an impressive selectivity of 72% for CO2 conversion to ethylene, stimulating our imagination of what industrial CO2 electrolyzers may look like in the near future.

Methanol is a major fuel and chemical feedstock currently produced from syngas, a CO/CO2/H2 mixture. Herein we identify formate binding strength as a key parameter limiting the activity and stability of known catalysts for methanol synthesis in the presence of CO2. We present a molybdenum phosphide catalyst for CO and CO2 reduction to methanol, which through a weaker interaction with formate, can improve the activity and stability of methanol synthesis catalysts in a wide range of CO/CO2/H2 feeds.

The discovery of materials for the electrochemical transformation of carbon dioxide into liquid fuels has the potential to impact large-scale storage of renewable energies and reduce carbon emissions. Here, we report the discovery of an electrocatalyst composed of gold nanoparticles on a polycrystalline copper foil (Au/Cu) that is highly active for CO2 reduction to alcohols. At low overpotentials, the Au/Cu electrocatalyst is over 100 times more selective for the formation of products containing C–C bonds versus methane or methanol, largely favouring the generation of alcohols over hydrocarbons. A combination of electrochemical testing and transport modelling supports the hypothesis that CO2 reduction on gold generates a high CO concentration on nearby copper, where CO is further reduced to alcohols such as ethanol and n-propanol under locally alkaline conditions. The bimetallic Au/Cu electrocatalyst exhibits synergistic activity and selectivity superior to gold, copper or AuCu alloys, and opens new possibilities for the development of CO2 reduction electrodes exploiting tandem catalysis mechanisms. The electrochemical transformation of CO2 into liquid fuels is a major challenge. Now, Jaramillo, Hahn and co-workers present a Au/Cu catalyst highly active to C2+ alcohols at low overpotentials as a result of a tandem mechanism where CO2 is reduced to CO on Au and further reduced to C2+ alcohols on nearby Cu.

Understanding the surface reactivity of CO, which is a key intermediate during electrochemical CO2 reduction, is crucial for the development of catalysts that selectively target desired products for the conversion of CO2 to fuels and chemicals. In this study, a custom-designed electrochemical cell is utilized to investigate planar polycrystalline copper as an electrocatalyst for CO reduction under alkaline conditions. Seven major CO reduction products have been observed including various hydrocarbons and oxygenates which are also common CO2 reduction products, strongly indicating that CO is a key reaction intermediate for these further-reduced products. A comparison of CO and CO2 reduction demonstrates that there is a large decrease in the overpotential for C–C coupled products under CO reduction conditions. The effects of CO partial pressure and electrolyte pH are investigated; we conclude that the aforementioned large potential shift is primarily a pH effect. Thus, alkaline conditions can be used to inc...

Improved activity and stability Pt-based catalysts for the oxygen reduction reaction (ORR) are needed to perpetuate the deployment of polymer electrolyte fuel cells (PEFCs) in the transportation sector. Here, we use atomic layer deposition of TiO2 and Pt coupled with thermal reductive annealing to prepare Pt3Ti electrocatalysts. The atomic level synthetic control resulted in Pt3Ti nanoparticles with high ORR performance, including a mass activity of 1.84 A/mgPt and excellent electrochemical stability. The Pt3Ti nanoparticles show excellent specific activity — 5.3-fold higher than commercial Pt/C and 3-fold higher than polycrystalline Pt, exceeding the performance of any PtTi catalysts reported to date. Combined experimental and computational efforts indicate that Pt enrichment on the Pt3Ti enhances the activity, and the intrinsic stability of the Pt3Ti phase provides durability. This knowledge, along with the facile fabrication of alloys by atomic layer deposition, can be leveraged to designed improved performance catalysts.

During CO2 electroreduction (CO2R), the hydrogen evolution reaction (HER) is a competing reaction. We present a combined experimental and theoretical investigation of the HER activity of transition metals under CO2R conditions. Experimental HER polarization curves were measured for six polycrystalline metal surfaces (Au, Ag, Cu, Ni, Pt, and Fe) in the presence of CO2 gas. We found that the HER activity of the transition metals is significantly shifted, relative to the CO2-free case. Density functional theory (DFT) calculations suggest that this shift arises from adsorbate–adsorbate interactions between *CO and *H on intermediate and strong binding metals, which weakens the *H binding energy. Using a simple model for the effect of *CO on the *H binding energy, we construct an activity volcano for HER in the presence of CO2 gas that is consistent with experimental trends. The significant changes in HER activity in the presence of CO2 gas is an important consideration in catalyst design and could help develo...

Hydrogen peroxide (H2O2) is a valuable chemical with a wide range of applications, but the current industrial synthesis of H2O2 involves an energy-intensive anthraquinone process. The electrochemical synthesis of H2O2 from oxygen reduction offers an alternative route for on-site applications; the efficiency of this process depends greatly on identifying cost-effective catalysts with high activity and selectivity. Here, we demonstrate a facile and general approach to catalyst development via the surface oxidation of abundant carbon materials to significantly enhance both the activity and selectivity (~90%) for H2O2 production by electrochemical oxygen reduction. We find that both the activity and selectivity are positively correlated with the oxygen content of the catalysts. The density functional theory calculations demonstrate that the carbon atoms adjacent to several oxygen functional groups (–COOH and C–O–C) are the active sites for oxygen reduction reaction via the two-electron pathway, which are further supported by a series of control experiments. The direct synthesis of hydrogen peroxide via oxygen reduction is an attractive alternative to the anthraquinone process. Here, a general trend linking oxygenation of carbon surfaces with electrocatalytic performance in peroxide synthesis is demonstrated, and computational studies provide further insight into the nature of the active sites.

Transition metal sulfides have been widely studied as electrocatalysts for the hydrogen evolution reaction (HER). Though elemental doping is an effective way to enhance sulfide activity for the HER, most studies have only focused on the effect of doping sulfide edge sites. Few studies have investigated the effect of doping the basal plane or the effect of doping concentration on basal plane activity. Probing the dopant concentration dependence of HER activity is challenging due to experimental difficulties in controlling dopant incorporation. Here, we overcome this challenge by first synthesizing doped transition metal oxides and then sulfurizing the oxides to sulfides, yielding core/shell Co-doped WS2/W18O49 nanotubes with a tunable amount of Co. Our combined density functional theory (DFT) calculations and experiments demonstrate that the HER activity of basal plane WS2 changes non-monotonically with the concentration of Co due to local changes in the binding energy of H and the formation energy of S-vacancies. At an optimal Co doping concentration, the overpotential to reach −10 mA cm−2 is reduced by 210 mV, and the Tafel slope is reduced from 122 to 49 mV per decade (mV dec−1) compared to undoped WS2 nanotubes.

CO2 emissions can be transformed into high-added-value commodities through CO2 electrocatalysis; however, efficient low-cost electrocatalysts are needed for global scale-up. Inspired by other emerging technologies, the authors report the development of a gas diffusion electrode containing highly dispersed Ag sites in a low-cost Zn matrix. This catalyst shows unprecedented Ag mass activity for CO production: -614 mA cm-2 at 0.17 mg of Ag. Subsequent electrolyte engineering demonstrates that halide anions can further improve stability and activity of the Zn-Ag catalyst, outperforming pure Ag and Au. Membrane electrode assemblies are constructed and coupled to a microbial process that converts the CO to acetate and ethanol. Combined, these concepts present pathways to design catalysts and systems for CO2 conversion toward sought-after products.

The nanostructuring of light-absorbing materials in photoelectrochemical applications can potentially improve the performance of charge transport limited semiconductors by increasing incident light absorption as well as the electrochemically active surface area. However, a drawback associated with an increase in electrode surface area is the increased effect of surface recombination on device performance. To understand the interplay of the positive and negative impacts of nanostructuring, we studied these effects by varying the nanowire length and thereby surface area on the photoelectrochemical performance of tandem core–shell Si/Ta3N5 photoanodes. Si/Ta3N5 nanowires of different lengths, 1.2–3.3 μm, were fabricated by changing the reactive ion etch duration by which the Si nanowires are formed and subsequently characterized by optical UV–vis reflectance measurements, effective charge carrier lifetime measurements, and photoelectrochemical ferrocyanide oxidation. Overall, we show that as the nanowire len...

Hydrogen peroxide (H2O2), an important industrial chemical, is currently produced through an energy-intensive anthraquinone process that is limited to large-scale facilities. Small-scale decentralized electrochemical production of H2O2 via a two-electron oxygen reduction reaction (ORR) offers unique opportunities for sanitization applications and the purification of drinking water. The development of inexpensive, efficient, and selective catalysts for this reaction remains a challenge. Herein, we examine two different porous carbon-based electrocatalysts and show that they exhibit high selectivity for H2O2 under alkaline conditions. By rationally varying synthetic methods, we explore the effect of pore size on electrocatalytic performance. Furthermore, by means of density functional calculations, we point out the critical role of carbon defects. Our theory results show that the majority of defects in graphene are naturally selective for the two-electron reduction of O2 to H2O2, and we identify the types o...

The performance of oxygen reduction reaction (ORR) catalysts has been substantially improved over the past several decades. These catalysts are evaluated for electrochemical activity in a rotating disk electrode (RDE) assembly using an oxygen saturated liquid electrolyte. Koutecky-Levich (K-L) analysis provides a simple and effective method to extract electrokinetic information by correcting for mass transport effects. We propose extensions to the K-L analysis to address some of the simplifying assumptions made during its derivation. In particular, we demonstrate that decreased concentrations of surface reactants contribute to measured overpotentials in a Nernst fashion, and can lead to an underestimation of catalytic activity. By applying a Nernst overpotential correction in conjunction with K-L analysis, more accurate measurements of the intrinsic reaction kinetics under mass transport limited conditions are possible. As the K-L method assumes a reaction order of unity, we also consider kinetic reaction order deviation from unity due to measurement conditions. We show that examining the dependence of the reaction order on overpotential can provide a straightforward technique to probe blocking effects of surface absorbents. We propose that these extensions to the K-L method can allow for increased versatility of the RDE technique for extracting electrokinetic parameters for ORR catalysts.

The electrochemical reduction of carbon dioxide using renewably generated electricity offers a potential means for producing fuels and chemicals in a sustainable manner. To date, copper has been found to be the most effective catalyst for electrochemically reducing carbon dioxide to products such as methane, ethene, and ethanol. Unfortunately, the current efficiency of the process is limited by competition with the relatively facile hydrogen evolution reaction. Since multi-carbon products are more valuable precursors to chemicals and fuels than methane, there is considerable interest in modifying copper to enhance the multi-carbon product selectivity. Here, we report our investigations of electrochemical carbon dioxide reduction over CuAg bimetallic electrodes and surface alloys, which we find to be more selective for the formation of multi-carbon products than pure copper. This selectivity enhancement is a result of the selective suppression of hydrogen evolution, which occurs due to compressive strain i...

To limit further rising levels in methane emissions from stationary and mobile sources and to enable promising technologies based on methane, development of efficient combustion catalysts that completely oxidize CH4 to CO2 and H2O at low temperatures in the presence of high steam concentrations is required. Palladium is widely considered as one of the most promising materials for this reaction, and a better understanding of the factors affecting its activity and stability is crucial to design even more improved catalysts that efficiently utilize this precious metal. Here we report a study of the effect of three important variables (particle size, support, and reaction conditions including water) on the activity of supported Pd catalysts. We use uniform palladium nanocrystals as catalyst precursors to prepare a library of well-defined catalysts to systematically describe structure-property relationships with the help from theory and in-situ X-ray absorption spectroscopy. With this approach, we confirm that...

© 2017 American Chemical Society. Developing materials, interfaces, and devices with improved stability remains one of the key challenges in the field of photoelectrochemical water splitting. As a barrier to corrosion, molybdenum disulfide is a particularly attractive protection layer for photocathodes due to its inherent stability in acid, the low permeability of its basal planes, and the excellent hydrogen evolution reaction (HER) activity the MoS2 edge. Here, we demonstrate a stable silicon photocathode containing a protecting layer consisting of molybdenum disulfide, molybdenum silicide, and silicon oxide which operates continuously for two months. We make comparisons between this system and another molybdenum sulfide-silicon photocathode embodiment, taking both systems to catastrophic failure during photoelectrochemical stability measurements and exploring mechanisms of degradation. X-ray photoelectron spectroscopy and transmission electron microscopy provide key insights into the origins of stability.

© 2017 American Chemical Society. Molybdenum sulfides have been identified as promising materials for catalyzing the hydrogen evolution reaction (HER) in acid, with active edge sites that exhibit some of the highest turnover frequencies among nonpreciousmetal catalysts. The thiomolybdate [Mo 3 S 13 ] 2- nanocluster catalyst contains a structural motif that resembles the active site of MoS2 and has been reported to be among the most active forms of molybdenum sulfide. Herein, we improve the activity of the [Mo 3 S 13 ] 2- catalysts through catalyst-support interactions. We synthesize [Mo 3 S 13 ] 2- on gold, silver, glassy carbon, and copper supports to demonstrate the ability to tune the hydrogen binding energy of [Mo 3 S 13 ] 2- using catalyst-support electronic interactions and optimize HER activity.

Bimetallic catalysts are promising for the most difficult thermal and electrochemical reactions, but modeling the many diverse active sites on polycrystalline samples is an open challenge. We present a general framework for addressing this complexity in a systematic and predictive fashion. Active sites for every stable low-index facet of a bimetallic crystal are enumerated and cataloged, yielding hundreds of possible active sites. The activity of these sites is explored in parallel using a neural-network-based surrogate model to share information between the many density functional theory (DFT) relaxations, resulting in activity estimates with an order of magnitude fewer explicit DFT calculations. Sites with interesting activity were found and provide targets for follow-up calculations. This process was applied to the electrochemical reduction of CO2 on nickel gallium bimetallics and indicated that most facets had similar activity to Ni surfaces, but a few exposed Ni sites with a very favorable on-top CO ...