Search

Abstract In response to the climate goal of achieving carbon neutrality by 2050, efficient electrochemical energy conversion devices are garnering increasing attention. However, the enhancement of electrochemical performance using noble metal electrocatalysts, along with cost reduction and electrode fabrication, remain significant challenges. Noble metal hybrid nanostructures, possessing multiple surface functionalities, lead to outstanding electrocatalytic performances and low‐cost potential. Strain effects can bolster the bonding strength between the noble metal layers and the substrate or core layers, while simultaneously affecting electrocatalytic performance through tuning the binding strength between catalytically active sites and reactants, including intermediates. This review encapsulates the research efforts directed towards improving the performance of noble metal electrocatalysts and provides an overview of the latest advancements in controlling the surface state of noble metals by incorporating a secondary component. We discuss systematic approaches to adjusting surface strain effects on noble metals, characterization techniques, and application case studies, while extracting key design indicators for readers to consider from a macroscopic perspective. Further, we outline the challenges encountered and current solutions when advancing noble metal catalysts from theoretical mechanisms to practical use. Finally, the perspectives on the future research of noble metal surface layer control techniques were also provided.

The Chinese mitten crab (Eriocheir sinensis), an economically important crustacean that is endemic to China, has recently experienced high-temperature stress. The high thermal tolerance of E. sinensis points to its promise in being highly productive in an aquacultural context. However, the mechanisms underlying its high thermal tolerance remain unknown. In this study, female E. sinensis that were heat exposed for 24 h at 38.5 °C and 33 °C were identified as high-temperature-stressed (HS) and normal-temperature-stressed (NS) groups, respectively. The hepatopancreas of E. sinensis from the HS and NS groups were used for transcriptome and proteomic analyses. A total of 2350 upregulated and 1081 downregulated differentially expressed genes (DEGs) were identified between the HS and NS groups. In addition, 126 differentially expressed proteins (DEPs) were upregulated and 35 were downregulated in the two groups. An integrated analysis showed that 2641 identified genes were correlated with their corresponding proteins, including 25 genes that were significantly differentially expressed between the two omics levels. Ten Gene Ontology terms were enriched in the DEGs and DEPs. A functional analysis revealed three common pathways that were significantly enriched in both DEGs and DEPs: fluid shear stress and atherosclerosis, leukocyte transendothelial migration, and thyroid hormone synthesis. Further analysis of the common pathways showed that MGST1, Act5C, HSP90AB1, and mys were overlapping genes at the transcriptome and proteome levels. These results demonstrate the differences between the HS and NS groups at the two omics levels and will be helpful in clarifying the mechanisms underlying the thermal tolerance of E. sinensis.

Silicon (Si) anodes with extremely high theoretical capacities are considered indispensable for next-generation high-energy lithium-ion batteries (LIBs). However, several intractable problems, including pulverization, poor electrical contact, and continuous side reactions caused by the large volume change of Si during lithiation/delithiation, lead to a short cycle life and poor rate capability, thus hindering the commercial use of Si anodes in LIBs. Two-dimensional (2D) Si with a unique graphene-like structure has a short ion diffusion pathway, small volume change during lithiation, and efficient redox site utilization, making it more promising than bulk Si or Si with other versatile structures for use in LIBs. Theoretical analysis demonstrated that the low energy barrier on the surface of 2D Si accelerates the transport of Li+. However, the issues surrounding 2D Si, including the tedious and user-unfriendly synthesis, ease of restacking, and atmospheric sensitivity, limit its practical applications, which are discussed in this review. Furthermore, possible solutions to these remaining challenges and new directions are provided, with the aim of designing practical and high-performance 2D Si anodes for next-generation LIBs.

Subsidence of the earth’s surface induced by mining activities has always been a critical concern in the relevant research fields. This subsidence disrupts the original geological structures and can lead to secondary geological hazards, environmental degradation, and threats to human lives and property. An in-depth investigation of this issue led to us using the three-dimensional finite-difference numerical simulation software FLAC3D 6.0 in this study. The research focuses on the Prang Copper Mine subsidence area in Yunnan Province, China, with a particular emphasis on the comprehensive analysis of the formation mechanisms of a large-scale crack appearing on the south side of the subsidence area. The study also includes a predictive analysis of the future development trends of this crack. The simulation results indicate that the crack formation was a consequence of the combined effects of uneven surface subsidence induced by underground structural interfaces and underground mining activities. As mining activities continued, the non-uniform subsidence of the surface intensified. The northward (Y-axis) displacement difference of characteristic points A and B on both sides of the crack continuously increased, signifying the widening of the crack. Mining activities also influence the displacement in the X-axis direction, potentially posing risks to support structures on either side of existing drainage channels. Therefore, effective control measures are warranted. Furthermore, this study highlights the possibility that new mining activities may further exacerbate subsidence on the south side of the subsidence area. This research provides valuable insights into the complexity of surface subsidence and its associated risks, offering guidance for mining activity planning and safety measures.

Surface engineering has been proved efficient and universally applicable in improving the performance of CeO2 in various fields. However, previous approaches have typically required high-temperature calcination or tedious procedures, which makes discovery of a moderate and facile modification approach for CeO2 an attractive subject. In this paper, porous CeO2 nanosheets with effective nitrogen-doping were synthesized via a low-temperature NH3/Ar plasma treatment and exhibited boosted hydrogen evolution reaction performance with low overpotential (65 mV) and long-term stability. The mechanism of the elevated performance was investigated by introducing Ar-plasma-treated CeO2 with no nitrogen-doping as the control group, which revealed the dominant role of nitrogen-doping by providing abundant active sites and improving charge transfer characteristics. This work illuminates further investigations into the surface engineering methodologies boosted by plasma and the relative mechanism of the structure–activity relationship.

Plastic pollution has emerged as a pressing global concern, driven by the extensive production and consumption of plastic, resulting in over 8 billion tons of plastic waste generated to date. Conventional disposal methods have proven inadequate in effectively managing polymer waste, necessitating the exploration of novel techniques. Previous research has demonstrated the successful application of photoreforming (PR) in converting water-soluble oligomer fragments of plastics into valuable chemicals. However, an unresolved challenge remains in dealing with the insoluble oligomer fragments characterized by complex chemical structures and larger molecular sizes. In this study, we propose a facile approach that involves H2PdCl4-induced activation on PET substrate for PR of PET bottles. Remarkably, this method enables the production of C1-C3 compounds without the reliance on sacrificial reagents or photocatalysts. The significant findings of this study offer a practical solution to address the most formidable aspect of plastic PR, specifically targeting the insoluble oligomer fragments. Moreover, this research contributes to the advancement of effective strategies for the sustainable management of plastic waste.

Abstract Deregulation of NEK2(NIMA-related serine/threonine 2) confers chemotherapeutic resistance to apoptosis and is closely correlated with poor prognosis in hepatocellular carcinoma (HCC). Here, we find that nanoparticles are prepared through hemisynthesis from natural nitidine chloride (NC) with enhanced antitumor activity. Nitidine chloride nanoparticle (TPGS-FA/NC) treatment show good therapy effect in Li-7 hepatocellular carcinoma cells. Additionally, molecular docking technologies are aimed at NEK2 protein (PDB ID: 6SGD) to analyze the detailed binding interactions with the potent target. NC participates in interactions with Asp159 residue. These studies advance the understanding of the modification of nitidine chloride substituent and provide useful drug design information for liver cancer treatment.

The ever-increasing food requirement with globally growing population demands advanced agricultural practices to improve grain yield, to gain crop resilience under unpredictable extreme weather, and to reduce production loss caused by insects and pathogens. To fulfill such requests, genome engineering technology has been applied to various plant species. To date, several generations of genome engineering methods have been developed. Among these methods, the new mainstream technology is clustered regularly interspaced short palindromic repeats (CRISPR) with nucleases. One of the most important processes in genome engineering is to deliver gene cassettes into plant cells. Conventionally used systems have several shortcomings, such as being labor- and time-consuming procedures, potential tissue damage, and low transformation efficiency. Taking advantage of nanotechnology, the nanoparticle-mediated gene delivery method presents technical superiority over conventional approaches due to its high efficiency and adaptability in different plant species. In this review, we summarize the evolution of plant biomolecular delivery methods and discussed their characteristics as well as limitations. We focused on the cutting-edge nanotechnology-based delivery system, and reviewed different types of nanoparticles, preparation of nanomaterials, mechanism of nanoparticle transport, and advanced application in plant genome engineering. On the basis of established methods, we concluded that the combination of genome editing, nanoparticle-mediated gene transformation and de novo regeneration technologies can accelerate crop improvement efficiently in the future.

A series of hydrazones, 2-cyano-N'-(4-diethylamino-2-hydroxybenzylidene)acetohydrazide (1), N'-(5-bromo-2-hydroxy-3-methoxybenzylidene)-3-chlorobenzohydrazide monohydrate (2·H2O), N'-(2-hydroxy-3-methylbenzylidene)-4-nitrobenzohydrazide (3), and N'-(2-hydroxy-3-trifluoromethoxybenzylidene)-4-nitrobenzohydrazide (4), were prepared and structurally characterized by elemental analysis, IR and 1H NMR spectra, and single crystal X-ray determination. Xanthine oxidase inhibitory activities of the compounds were studied. Among the compounds, 2-cyano-N’-(4-diethylamino-2-hydroxybenzylidene)acetohydrazide shows the most effective activity. Docking simulation was performed to insert the compounds into the crystal structure of xanthine oxidase at the active site to investigate the probable binding modes.

The protein tyrosine phosphatase PTPN22 inhibits T cell activation by dephosphorylating some essential proteins in the T cell receptor (TCR)-mediated signaling pathway, such as the lymphocyte-specific protein tyrosine kinase (Lck), Src family tyrosine kinases Fyn, and the phosphorylation levels of Zeta-chain-associated protein kinase-70 (ZAP70). For the first time, we have successfully produced PTPN22 CS transgenic mice in which the tyrosine phosphatase activity of PTPN22 is suppressed. Notably, the number of thymocytes in the PTPN22 CS mice was significantly reduced, and the expression of cytokines in the spleen and lymph nodes was changed significantly. Furthermore, PTPN22 CS facilitated the positive and negative selection of developing thymocytes, increased the expression of the TCRαβ-CD3 complex on the thymus cell surface, and regulated their internalization and recycling. ZAP70, Lck, Phospholipase C gamma1(PLCγ1), and other proteins were observed to be reduced in PTPN22 CS mouse thymocytes. In summary, PTPN22 regulates TCR internalization and recycling via the modulation of the TCR signaling pathway and affects TCR expression on the T cell surface to regulate negative and positive selection. PTPN22 affected the development of the thymus, spleen, lymph nodes, and other peripheral immune organs in mice. Our study demonstrated that PTPN22 plays a crucial role in T cell development and provides a theoretical basis for immune system construction.

Holotrichia parallela is an important plant pest. Comparative feeding experiments showed that the egg production, oviposition duration and survival rate of H. parallela beetles were significantly higher when they fed on elm leaves than when they fed on willow or purpus privet leaves. RNA sequencing was used to determine transcriptomic changes associated with oviposition. Comparative transcriptome analysis revealed that the beetles that fed on elm and willow had a total of 171 genes with differential expression. When the beetles fed on elm and purpus privet, 3568 genes had differential expression. The vitellogenesis, ovarian serine protease, odorant-binding proteins, acyl-CoA synthetase and follicle cell proteins were commonly upregulated genes in elm-fed beetles compared with those fed on willow/purpus privet leaves. The involvement of the follicle cell protein 3C gene in the regulation of oviposition was confirmed using RNA interference. The results provide insights into the molecular mechanisms underlying oviposition in H. parallela feeding on different host plants. This study also describes a method for identifying potentially effective genes for pest control.

Zinc oxide is a popular semiconductor used in catalysts due to its wide bandgap and high exciton binding energy. However, the photocatalytic performance of ZnO was compromised by its insufficient electron-hole separation efficiency and electron transfer rate. Herein, ZnO-reduced graphene oxide (rGO) composite solid catalyst was synthesized by one-step electrodeposition method on FTO substrate using lithium perchlorate (LiClO4) as the supporting electrolyte. Scanning electron microscopy, Raman, Fourier Transform Infrared, and XRD characterizations confirmed the deposition of ZnO and the reduction of graphene oxide Owing to the cooperative effect between rGO and ZnO, the as-prepared ZnO-rGO composites show much enhanced photocatalytic degradation ability compared with pure ZnO nanorods. By optimizing the conditions of electrodeposition of ZnO-rGO composites, the degradation rate of methylene blue can reach 99.1% within 120 min. Thus, the simple preparation and the excellent performance could endow the ZnO-rGO composites with promising application in practical dye-polluted water treatment.

The flue gas desulfurization wastewater is highly saline and has too many refractory pollutants to be recycled during the desulfurization process of the coal-fired heating plant. Given that waste heat is abundant in coal-fired heating plants, a thermal treatment method was developed to simultaneously remove sulfates and nitrates from the wastewater, with the production of chemical-grade natroalunite and recycled water. The results showed that sulfates and nitrates were 50.3 and 10 g/L in the wastewater, respectively, and only 2.8% and 9.1% were removed after direct treatment at 270°C for 7 h; but these rates increased to 99.3% and 99.9%, respectively, with the addition of commercial poly aluminum chloride. Mass balance summarized that the treatment of 1 ton wastewater needed 0.1 ton PAC and produced 0.11 ton natroalunite and 0.92 ton recycle water. The removal of sulfates and nitrates was mainly done by the precipitation reaction of sulfates such as natroalunite and the redox reaction between nitrates and organics, respectively. Thermodynamic analysis demonstrated that the precipitate reaction occurred at 45°C and accelerated in the temperature range of 45–270°C, but became slow with the decrease of sulfate and Al concentrations in wastewater. Four other reagents were also used for wastewater treatment in comparison with PAC and showed the following order of performance: PAC > citrate calcium > limestone > subacetate aluminum > citrate ferric. This method provided a practical route to treat wastewater from flue gas desulfurization without generating secondary waste.

Background: Xin-Su-Ning Capsules (XSNC) is an effective prescription for the treatment of arrhythmia composed of eleven Chinese herbs. With the wide application of XSNC in clinic, its quality control issues have also received increasing attention. Based on the multi-components characteristics of Chinese herbal compound, there is an urgent need to establish a quality evaluation system. Methods: Gas chromatography-mass spectrometry (GC-MS) and ultra high-performance liquid chromatography quadrupole electrostatic orbitrap high resolution mass spectrometry (UHPLC-Q-Exactive-Orbitrap-MS) were performed to identify the preliminary chemical profile of XSNC. Subsequently, a rapid ultra high-performance liquid chromatography coupled with electrospray ionization triple-quadrupole mass spectrometry (UHPLC-QQQ-MS/MS) method was developed to evaluate the quality of XSNC through a simultaneous determination of 16 components. Results: A total of 21 volatile components and 59 non-volatile compounds were tentatively identified from the XSNC, each identified compound is marked on the corresponding chromatogram. Moreover, sixteen chemical constituents (sophocarpine, matrine, febrifugine, berberine, palmatine, Tangeratin, nobiletin, liensinine, neferine, scopoletin, isoliquiritigenin, liquiritigenin, naringenin, naringin, hesperidin and glycyrrhizic acid) were quantified by the developed UHPLC-QQQ-MS/MS method. The method validation of the sixteen compounds was performed with acceptable linearity (R2, 0.9990-1.0000), precision (RSD, 0.25-2.06%), repeatability (RSD, 0.93-2.90%) and recovery (99.65%-104.03%, RSD≤4.35%). Conclusions: This qualitative analysis method sensitive and reliable for searching the volatile and non-volatile compounds from XSNC. The linearity, accuracy and precision of the quantitative analysis method were satisfactory. It is proposed that the methods described here can be applied for rapid evaluation, quality control and authenticity establishment of XSNC.

Lamiophlomis rotata (Benth.) Kudo (L. rotata) belongs to Lamiaceae family, which is an important medicinal plant endemic to Qinghai Tibet Plateau. Traditionally, the whole herb of L. rotata is used for medicine, especially for the treatment of rheumatoid arthritis (RA) in clinical practise. As a result of absolute digging, the plant has a long regeneration cycle after excavation and the damage to plateau grassland ecological environment is difficult to recover. It has been encouraged to use aerial part of the plant with the purpose of protecting environment and maintaning biological diversity. At present, researchers have compared the primary metabolites and iridoids between aerial parts and roots, but there are few reports on the chemical differences and activity comparison of secondary metabolites. In order to characterize the secondary metabolites of different parts, UPLC/Q-Orbitrap-MS was employed to collect data from the extracts of aerial parts and roots, in combination with plant metabolomics technology to screen and quantify differential metabolites. At the same time, network pharmacological analysis with rheumatoid arthritis and immunity as the key words was carried out according to the identification results to clarify the active ingredients of L. rotata in the treatment of RA, so as to speculate the pharmacological effects of aerial parts and roots based on the distribution of active components. A total of 16 potential markers were selected and identified to differentiate two parts. Among them, 8 characteristic flavonoids with similar skeletons were unique in aerial parts, while the other 8 components, including 2 iridoid glycosides and 6 phenylethanoid glycosides, were detected in both aerial parts and roots, but with differentiate contents. Among the predicted 6 active components, there were 5 flavonoids, of which 3 (namely luteolin, apigenin and 2″-acetylastragalin) were still differential metabolites and mainly distributed in the aerial parts. The results revealed that certain flavonoids as potential markers made a distinction between aerial part and root of L. rotata, and were the main active components against RA, which provided a theoretical basis for the aerial parts to replace the whole herbs, and laid a material foundation for further pharmacological research.

The rational design of interfacial contacts plays a decisive role in improving interfacial carrier transfer and separation in heterojunction photocatalysts. In Z-scheme photocatalysts, the recombination of photogenerated electron–hole pairs is prevented so that the redox capacity is maintained. Here, one-dimensional graphitic carbon nitride (g-C3N4)/CoFe2O4 fibres were synthesised as a new type of magnetic Z-scheme visible-light photocatalyst. Compared with pure g-C3N4 and CoFe2O4, the prepared composite photocatalysts showed considerably improved performance for the photooxidative degradation of tetracycline and methylene blue. In particular, the photodegradation efficiency of the g-C3N4/CoFe2O4 fibres for methylene blue was approximately two and seven times those of g-C3N4 and CoFe2O4, respectively. The formation mechanism of the Z-scheme heterojunctions in the g-C3N4/CoFe2O4 fibres was investigated using photocurrent spectroscopy and electrochemical impedance spectroscopy. We proposed that one of the reasons for the improved photodegradation performance is that the charge transport path in one-dimensional materials enables efficient photoelectron and hole transfer. Furthermore, the internal electric field of the prepared Z-scheme photocatalyst enhanced visible-light absorption, which provided a barrier for photoelectron–hole pair recombination.

A four-component synthesis of 2-phenyl-9H-pyrimido[4,5-b]indoles was developed using indole-3-carboxaldehydes, aromatic aldehyde and ammonium iodide as the raw materials under transition-metal-free conditions. The pyrimidine ring was formed in one pot through [4 + 2] annulation reaction. Four C–N bonds were formed in one pot promoted by iodine and iodide additives. This work is highlighted by using two ammonium iodides as the sole nitrogen source.

Genetically encoded non-canonical amino acids (ncAAs) with electrophilic moieties are excellent tools to investigate protein-protein interactions (PPIs) both in vitro and in vivo. These ncAAs, including a series of alkyl bromide-based ncAAs, mainly target cysteine residues to form protein-protein cross-links. Although some reactivities towards lysine and tyrosine residues have been reported, a comprehensive understanding of their reactivity towards a broad range of nucleophilic amino acids is lacking. Here we used a recently developed OpenUaa search engine to perform an in-depth analysis of mass spec data generated for Thioredoxin and its direct binding proteins cross-linked with an alkyl bromide-based ncAA, BprY. The analysis showed that, besides cysteine residues, BprY also targeted a broad range of nucleophilic amino acids. We validated this broad reactivity of BprY with Affibody/Z protein complex. We then successfully applied BprY to map a binding interface between SUMO2 and SUMO-interacting motifs (SIMs). BprY was further applied to probe SUMO2 interaction partners. We identified 264 SUMO2 binders, including several validated SUMO2 binders and many new binders. Our data demonstrated that BprY can be effectively used to probe protein-protein interaction interfaces even without cysteine residues, which will greatly expand the power of BprY in studying PPIs.

Post-weaning diarrhea caused by enterotoxigenic Escherichia coli F18 (E. coli F18) causes significant economic losses for pig producers. N6-methyladenosine (m6A) is a highly abundant epitranscriptomic marker that has been found to be involved in regulating the resistance of host cells to pathogenic infection, but its potential role in E. coli F18-exposed intestinal porcine epithelial cells (IPEC-J2) remains undetermined. Here, we demonstrated that m6A and its regulators modulate E. coli F18 susceptibility. Briefly, we revealed that the Wilms’ tumor 1-associating protein (WTAP) expressions were markedly elevated in IPEC-J2 cells upon E. coli F18 exposure. WTAP are required for the regulation of E. coli F18 adhesion in IPEC-J2 cells. Additionally, WTAP knockdown significantly suppressed m6A level at N-acetyllactosaminide beta-1,6-N-acetylglucosaminyl-transferase (GCNT2) 3′UTR, resulting in the enhancement of TH N6-methyladenosine RNA binding protein 2 (YTHDF2)-mediated GCNT2 mRNA stability. Subsequently, the altered GCNT2 expressions could inhibit the glycosphingolipid biosynthesis, thus improving resistance to E. coli F18 infection in IPEC-J2. Collectively, our analyses highlighted the mechanism behind the m6A-mediated management of E. coli F18 susceptibility, which will aid in the development of novel approaches that protect against bacterial diarrhea in piglets.

Summary: High energy consumption is impedimental for eliminating refractory organic pollutants in water by applying advanced oxidation processes (AOPs). Herein, we develop a novel process for destructing these organics in chemical conjuncted Fe0-FeyCz/Fex, graphited ZIF-8, and rGO air-saturated aqueous suspension without additional energy. In this process, a strong Fe-π interaction occurs on the composite surface, causing the surface potential energy ∼310.97 to 663.96 kJ/mol. The electrons for the adsorbed group of pollutants are found to delocalize to around the iron species and could be trapped by O2 in aqueous suspension, producing ⋅OH, H, and adsorbed organic cation radicals, which are hydrolyzed or hydrogenated to intermediate. The target pollutants undergo surface cleavage and convert H2O to ⋅OH, consuming chemical adsorption energy (∼2.852–9.793 kJ/mol), much lower than that of AOPs. Our findings provide a novel technology for water purification and bring new insights into pollutant oxidation chemistry.

F-actin dynamics (polymerization and depolymerization) are associated with nucleotide exchange, providing the driving forces for dynamic cellular activities. As an important residue in the nucleotide state-sensing region in actin, His73 is often found to be methylated in natural actin and directly participates in F-actin dynamics by regulating nucleotide exchange. The interaction between His73 and its neighboring residue, Gly158, has significance for F-actin dynamics. However, this weak chemical interaction is difficult to characterize using classic molecular modeling methods. In this study, ab initio modeling was employed to explore the binding energy between His73 and Gly158. The results confirm that the methyl group on the His73 side chain contributes to the structural stability of atomistic networks in the nucleotide state-sensing region of actin monomers and confines the material exchange (Pi release) pathway within F-actin dynamics. Further binding energy analyses of actin structures under different nucleotide states showed that the potential model of His73/Gly158 hydrogen bond breaking in the material exchange mechanism is not obligatory within F-actin dynamics.

Poly phenylene terephthalamide (PPTA) fiber has both high mechanical properties and low thermal conductivities, making it ideal for the design of thermal protection material in hypersonic vehicles. In this paper, the impact of CNT additions on the nanostructure and mechanical performances of PPTA fibers is investigated by coarse-grained molecular dynamics (CGMD) simulation. It can be found that CNT addition performs as the skeleton of PPTA polymer and induces a higher degree of alignment of polymers under shear deformation during the fabrication process. Both strength and Young’s modulus of the PPTA fiber can be improved by the addition of CNTs. The interaction between CNTs and PPTA polymer in PPTA fiber is important to further improve the efficiency of force transfer and mechanical performance of PPTA-CNT composite fibers.

False messages sent by malicious or selfish vehicle nodes will reduce the operation efficiency of the Internet of Vehicles, and can even endanger drivers in serious cases. Therefore, it is very important to detect malicious vehicle nodes in the network in a timely manner. At present, the existing research on detecting malicious vehicle nodes in the Internet of Vehicles has some problems, such as difficulties with identification and a low detection efficiency. Blockchain technology cannot be tampered with or deleted and has open and transparent characteristics. Therefore, as a shared distributed ledger in decentralized networking, blockchain can promote collaboration between transactions, processing and interaction equipment, and help to establish a scalable, universal, private, secure and reliable car networking system. This paper puts forward a block-network-based malicious node detection mechanism. Using blockchain technology in a car network for malicious node identification algorithm could create a security scheme that can ensure smooth communication between network vehicles. A consensus on legal vehicle identification, message integrity verification, false message identification and malicious vehicle node identification form the four parts of the security scheme. Based on the public–private key mechanism and RSA encryption algorithm, combined with the malicious node identification algorithm in the Internet of Vehicles, the authenticity of the vehicle’s identity and message is determined to protect the vehicle’s security and privacy. First, a blockchain-based, malicious node detection architecture is constructed for the Internet of vehicles. We propose a malicious node identification algorithm based on the blockchain consensus mechanism. Combined the above detection architecture with the consensus mechanism, a comprehensive and accurate verification of vehicle identity and message authenticity is ensured, looking at the four aspects of vehicle identification, accounting node selection, verification of transmission message integrity and identification of the authenticity of transmission messages. Subsequently, the verification results will be globally broadcast in the Internet of Vehicles to suppress malicious behavior, further ensure that reliable event messages are provided for the driver, improve the VANET operation environment, and improve the operation efficiency of the Internet of Vehicles. Comparing the proposed detection mechanism using simulation software, the simulation results show that the proposed blockchain-based trust detection mechanism can effectively improve the accuracy of vehicle node authentication and identification of false messages, and improve network transmission performance in the Internet of Vehicles environment.

Nitrate nitrogen is an important nitrogen source for tea plants’ growth and development. LBD transcription factors play important roles in response to the presence of nitrate in plants. The functional study of LBD transcription factors in tea plants remains limited. In this study, the LBD family gene CsLBD39 was isolated and characterized from tea plants. Sequence analysis indicated that CsLBD39 contained a highly conserved CX2CX6CX3CX domain. The phylogenetic tree assay showed that CsLBD39 belonged to class II subfamily of the LBD family. CsLBD39 was highly expressed in flowers and root; we determined that its expression could be induced by nitrate treatment. The CsLBD39 protein was located in the nucleus and has transcriptional activation activity in yeast. Compared with the wild type, overexpression of CsLBD39 gene in Arabidopsis resulted in smaller rosettes, shorter main roots, reduced lateral roots and lower plant weights. The nitrate content and the expression levels of genes related to nitrate transport and regulation were decreased in transgenic Arabidopsis hosting CsLBD39 gene. Compared with the wild type, CsLBD39 overexpression in transgenic Arabidopsis had smaller cell structure of leaves, shorter diameter of stem cross section, and slender and compact cell of stem longitudinal section. Under KNO3 treatment, the contents of nitrate, anthocyanins, and chlorophyll in leaves, and the content of nitrate in roots of Arabidopsis overexpressing CsLBD39 were reduced, the expression levels of nitrate transport and regulation related genes were decreased. The results revealed that CsLBD39 may be involved in nitrate signal transduction in tea plants as a negative regulator and laid the groundwork for future studies into the mechanism of nitrate response.

Graphitic C3N4-based materials are promising for photocatalytic H2 evolution applications, but they still suffer from low photocatalytic activity due to the insufficient light absorption, unfavorable structure and fast recombination of photogenerated charge. Herein, a novel anion–cation co-doped g-C3N4 porous nanotube is successfully synthesized using a self-assembly impregnation-assisted polymerization method. Ni ions on the surface of the self-assembly nanorod precursor can not only cooperate with H3P gas from the thermal cracking of NaH2PO2 as an anion–cation co-doping source, but, more importantly, suppress the shape-collapsing effect of the etching of H3P gas due to the strong coordinate bonding of Ni-P, which leads to a Ni and P co-doped g-C3N4 porous nanotube (PNCNT). Ni and P co-doping can build a new intermediate state near the conduction band in the bandgap of the PNCNT, and the porous nanotube structure gives it a higher BET surface area and light reflection path, showing a synergistic ability to broaden the visible-light absorption, facilitate photogenerated charge separation and the light-electron excitation rate of g-C3N4 and provide more reaction sites for photocatalytic H2 evolution reaction. Therefore, as expected, the PNCNT exhibits an excellent photocatalytic H2 evolution rate of 240.91 μmol·g−1·h−1, which is 30.5, 3.8 and 27.8 times as that of the pure g-C3N4 nanotube (CNT), single Ni-doped g-C3N4 nanotube (NCNT) and single P-doped g-C3N4 nanotube (PCNT), respectively. Moreover, the PNCNT shows good stability and long-term photocatalytic H2 production activity, which makes it a promising candidate for practical applications.

As an elastomer, PDMS can effectively suppress vibration in various fields in a certain temperature range by its viscoelastic behavior in the vitrification transition region, but the vibration isolation effect is poor at high temperature. In this paper, a three-dimensional graphene oxide (GO) foam is fabricated by solution processing method and freeze-drying techniques. After sequential infiltration synthesis, a GO-foam-reinforced PDMS nanocomposite (GO/PDMS) is fabricated with improved damping ability. By adjusting the content of GO, the micros-tructure of GO foam can be sensitively changed, which is crucial to the damping properties of composites. In this paper, by the dynamic mechanical analysis (DMA) of pure PDMS and five kinds of GO/PDMS composites, it is proved that the GO/PDMS composites developed in this work have reliable elasticity and viscoelasticity at 25 °C, which is 100 °C higher than the applicable temperature of pure PDMS. The storage modulus can reach 3.58 MPa, and the loss modulus can reach 0.45 MPa, which are 1.87 times and 2.0 times of pure PDMS, respectively. This GO-based nanocomposite is an ideal candidate for damping materials in passive vibration isolation devices.

Zn2+ is a heavy metal ion, and hazardous sludge from the electroplating and alloy industry is rich in Zn and impure Al and Ca. Such sludge is commonly recycled by dissolution in strong acid and then selective extraction to recycle Zn2+ by a special extraction reagent. In this process, impurity Al3+ is dissolved and then participates in the extraction of Zn2+, so Al3+ should be removed first. Here, a new strategy was reported for the effective removal of Al3+ and recovery of Zn2+ from a simulated Al/Zn-bearing sludge via an improved acid solution–precipitation route. The sludge was simulated by coagulating Zn-bearing waste water (290 mg/L Zn2+) with 600 mg/L polyaluminium chloride. The sludge was dissolved in sulphuric acid and nitric acid to form an acidic solution with Al3+ and Zn2+ concentrations of 3.2 g/L and 5.7 g/L, respectively. The solution was treated directly by hydrothermal method at 270 °C, in which 55% Al3+ was precipitated as boehmite and Al hydroxide. After the addition of 0.2 mL of ethylene glycol, the removal rate of Al3+ dramatically increased to 99.8%, with Zn2+ loss of 1.5%. The residual Zn2+ was 5620 mg/L in the treated solution and further directly precipitated by adjusting the pH of the solution to pH 7.5 with NaOH. The precipitated Zn2+ was in the form of simonkolleite with ZnO content of 63.1%, with Al content of only 0.8%. In the hydrothermal precipitation, the removal rate of Al3+ increased with the temperature and extension of reaction time. Al3+ was hydrolysed and precipitated as aluminium oxonium sulphate hydroxide and then recrystallised in boehmite form. Then, H+ was generated and consumed in the redox reaction of nitrate and ethylene glycol, accelerating the Al3+ precipitation. This method provides a way to efficiently separate Al3+ from a Zn-bearing solution and can be applied in the recycling of Al/Zn-bearing sludge.

Laser-driven radiation pressure acceleration (RPA) is one of the most promising candidates to achieve quasi-monoenergetic ion beams. In particular, many petawatt systems are under construction or in the planning phase. Here, a stable radiation pressure acceleration (SRPA) scheme is investigated, in which a circularly-polarized (CP) laser pulse illuminates a CH2 thin foil followed by a large-scale near-critical-density (NCD) plasma. In the laser-foil interaction, a longitudinal charge-separated electric field is excited to accelerate ions together with the heating of electrons. The heating can be alleviated by the continuous replenishment of cold electrons of the NCD plasma as the laser pulse and the pre-accelerated ions enter into the NCD plasma. With the relativistically transparent propagation of the pulse in the NCD plasma, the accelerating field with large amplitude is persistent, and its propagating speed becomes relatively low, which further accelerates the pre-accelerated ions. Our particle-in-cell (PIC) simulation shows that the SRPA scheme works efficiently with the laser intensity ranging from 6.85×1021 W cm−2 to 4.38×1023 W cm−2, e.g., a well-collimated quasi-monoenergetic proton beam with peak energy ∼1.2 GeV can be generated by a 2.74 × 1022 W cm−2 pulse, and the energy conversion efficiency from the laser pulse to the proton beam is about 16%. The QED effects have slight influence on this SRPA scheme.

Metabolic syndrome (MetS) is a set of complex, chronic inflammatory conditions that are characterized by central obesity and associated with an increased risk of cardiovascular diseases. In recent years, microRNAs (miRNAs) have become an important type of endocrine factors, which play crucial roles in maintaining energy balance and metabolic homeostasis. However, its unfavorable properties such as easy degradation in blood and off-target effect are still a barrier for clinical application. Nanosystem based delivery possess strong protection, high bioavailability and control release rate, which is beneficial for success of gene therapy. This review first describes the current progress and advances on miRNAs associated with MetS, then provides a summary of the therapeutic potential and targets of miRNAs in metabolic organs. Next, it discusses recent advances in the functionalized development of classic delivery systems (exosomes, liposomes and polymers), including their structures, properties, functions and applications. Furthermore, this work briefly discusses the intelligent strategies used in emerging novel delivery systems (selenium nanoparticles, DNA origami, microneedles and magnetosomes). Finally, challenges and future directions in this field are discussed provide a comprehensive overview of the future development of targeted miRNAs delivery for MetS treatment. With these contributions, it is expected to address and accelerate the development of effective NA delivery systems for the treatment of MetS.

Increasing numbers of miRNAs have been observed as oncogenes or tumor suppressors in colorectal cancer (CRC). It was recently reported that hsa-miR-106b-5p (miR-106b) promoted CRC cell migration and invasion. However, there were also studies showing contradictory results. Therefore, in the present study, we further explore the role of miR-106b and its downstream networks in the carcinogenesis of CRC. We observed that the expression of miR-106b is significantly increased in Pan-Cancer and CRC tissues compared with normal tissues from The Cancer Genome Atlas (TCGA) database. Furthermore, we used Transwell, Cell Counting Kit-8, and colony formation assays to clarify that miR-106b promotes the migratory, invasive, and proliferative abilities of CRC cells. For the first time, we systematically screened the target mRNAs and lncRNAs of miR-106b using TCGA database and the bioinformatics algorithms. Dual-luciferase reporter assay confirmed that NR2F2-AS1 and PLEKHO2 are the direct targets of miR-106b. Furthermore, NR2F2-AS1 acts as a competing endogenous RNA (ceRNA) to regulate PLEKHO2 expression by sponging miR-106b. The results of Gene set enrichment analysis (GSEA) and Western blot indicated that they play important roles in CRC progression by regulating MAPK pathway. Thus, miR-106b/NR2F2-AS1/PLEKHO2/MAPK signaling axis may suggest the potential usage in CRC treatment.

With the rapid development of terahertz technology, tunable high-efficiency broadband functional devices have become a research trend. In this research, a dynamically tunable dual broadband terahertz absorber based on the metamaterial structure of vanadium dioxide (VO2) is proposed and analyzed. The metamaterial is composed of patterned VO2 on the top layer, gold on the bottom layer and silicon dioxide (SiO2) as the middle dielectric layer. Simulation results show that two bandwidths of 90% absorption reach as wide as 2.32 THz from 1.87 to 4.19 THz and 2.03 THz from 8.70 to 10.73 THz under normal incidence. By changing the conductivity of VO2, the absorptance dynamically tuned from 2% to 94%. Moreover, it is verified that absorptance is insensitive to the polarization angle. The physical origin of this absorber is revealed through interference theory and matching impedance theory. We further investigate the physical mechanism of dual broadband absorption through electric field analysis. This design has potential applications in imaging, modulation and stealth technology.

Maintaining traceability links of software systems is a crucial task for software management and development. Unfortunately, dealing with traceability links are typically taken as afterthought due to time pressure. Some studies attempt to use information retrieval-based methods to automate this task, but they only concentrate on calculating the textual similarity between various software artifacts and do not take into account the properties of such artifacts. In this paper, we propose a novel traceability link recovery approach, which comprehensively measures the similarity between use cases and source code by exploring their particular properties. To this end, we leverage and combine machine learning and logical reasoning techniques. On the one hand, our method extracts features by considering the semantics of the use cases and source code, and uses a classification algorithm to train the classifier. On the other hand, we utilize the relationships between artifacts and define a series of rules to recover traceability links. In particular, we not only leverage source code’s structural information, but also take into account the interrelationships between use cases. We have conducted a series of experiments on multiple datasets to evaluate our approach against existing approaches, the results of which show that our approach is substantially better than other methods.