Search

Potassium ions batteries (PIBs) have been regarded as a promising choice for electrical energy storage technology due to the wide distribution of potassium resources. However, developing low-cost and robust earth-rich anode materials is still a major challenge for the practical and scalable usage of PIBs. Herein, for the first time, we developed nitrogen doped carbon coating CoS2/CuCo2S4 heterostructure (CoS2/CuCo2S4@NCs) hollow spheres and evaluated as anode for PIBs. The CoS2 and CuCo2S4 heterostructure interface could generate a built-in electric field, which can fasten electrons transportation. The nanostructures could shorten the diffusion length of K+ and provide large surface area to contact with electrolytes. Furthermore, the inner hollow sphere morphology along with the carbon layer could accommodate the volume expansion during cycling. What’s more, the N-doped carbon could increase the conductivity of the anodes. Benefitting from the above features, the CoS2/CuCo2S4@NCs displays an outstanding rate capability (309 mAh g−1 at 500 mA g−1 after 250 cycles) and a long-term cycling life (112 mAh g−1 at 1000 mA g−1 after 1000 cycles) in ether-based electrolyte. Conversion reaction mechanism in CoS2/CuCo2S4@NCs anode is also revealed through ex situ XRD characterizations. This work provides a practical direction for investigating metal sulfides as anode for PIBs.

Due to its appropriate bandgap (∼2.4 eV) and efficient light absorption, bismuth vanadate (BiVO4) shows promising photocatalysis activity. However, the charge carrier recombination and poor electron transmission often induce poor photocatalytic performance. Herein, we report a new method to in-situ synthesize non-noble metal Bi decorated mulberry-like BiVO4 by a two-step calcination process. Comprehensive characterizations reveal that non-noble metal Bi nanoparticles grown in-situ on BiVO4 result in the red-shift of the absorbance edge, greatly extending the light absorption from the ultraviolet into the near-infrared region. The surface plasmon resonance excitation of Bi nanoparticles and synergetic effects between Bi and BiVO4 effectively improve the photocatalytic efficiency and promote the separation of photoinduced electron-hole pairs in mulberry-like BiVO4. Density functional theory (DFT) calculation results further verify that the electrons are transferred from Bi to BiVO4 and the formation of OH radical in Bi/BiVO4 is attributed to the lower simulated free energy, which supports our experimental outcomes. This work provides a novel strategy to enhance light absorption and promote efficient solar utilization of photocatalysts for practical applications.

The van der Waals (vdW) integration enables to create heterostructures with intimate contact and bring new opportunities. However, it is not confined to layered materials but can also be generally extended to 3D materials. Multidimensional Bi2O3/BiVO4@graphene oxide (GO) van der Waals heterostructures are synthesized by one-pot wet chemistry method. Bi2O3/BiVO4 composite nanoparticles are self-assembled with GO framework by vdW interaction to form vdW heterostructures, in which GO framework allows short electron transport distance and rapid charge transfer and provides massive reactive sites. Such self-assembled heterostructures show a superior high photoactivity towards oxygen evolution with an enhanced oxygen generation rate of 1828 µmol h−1 g−1, nearly 3 times than that of pure BiVO4, attributed to the accelerated charge separation and transfer processes of Bi2O3/BiVO4@GO vdW heterostructures. This study indicates that our strategy provides a new avenue towards fabricating multi-dimensional vdW heterostructures and inspiring more innovative insights in oxygen evolution field.

Carbon fibers (CFs) show great potential for high-performance supercapacitors in miniature electronics fields, where high energy density and long cycling life are required. However, superior combination of these two attributes in CF-based supercapacitors still presents a long-standing challenge. Herein, straight carbon nanotubes (CNTs) with radial orientation and high chemical/physical stability are served as nanoscale conductive skeletons on CFs for supporting the polyaniline (PANI)/SnS2. The SnS2 with nanoflower-like features significantly increases the specific capacitance and specific surface area (SSA); furthermore, the PANI nanolayers covered on SnS2 petals enable secondary specific capacitance enhancement and inhibition of volume expansion of SnS2 during charging/discharging processes. Benefiting from these structural merits, the resultant PANI/SnS2@CNTs/CFs hybrids exhibit high SSA (2732.5 m2 g−1), high specific capacitance (891 F g−1 at 20 mV s−1) and excellent cycling stability (83.8% after 6000 cycles at 2 A g−1). Moreover, the hybrids deliver a superior energy density of 38.7 W h kg−1 at a power density of 1 kW kg−1 and outstanding performance stability, which should prove to be vastly advantageous as compared to the reported CF-based supercapacitors. Our work puts forward a new thinking of rational construction of high-performance CF-based supercapacitors that can be used in practical energy storage devices.

In this work, Mg-10 wt% Ni (M) with higher theoretical hydrogen production is taken as the research object. M − 10C (M = Mg10Ni, C = EG (expandable graphite), SnO2 (stannic oxide), EG-SnO2) composites with various compositions were integrated by high-energy ball milling (HEBM), and their H2 production behavior in simulated seawater were investigated. Not only did X-ray analysis and scanning electron microscopy techniques be used to study the phase composition diffraction pattern and surface morphology of these Mg-based composites in detail, but also the performance and mechanism of hydrogen generation are investigated by initial hydrolysis kinetics. The results demonstrate that the addition of hollow SnO2 nanotubes and lamellar EG to the M alloy make surface loose and porous, and the existing cracks and gaps can increase hydrolysis channels with rapid medium transfer, thereby improving the initial reaction kinetics and the final hydrogen production rates. M − 10C (M = Mg10Ni, C = EG, SnO2, EG-SnO2) composites can produce 98.207, 69.996, 58.235 mL ⋅g−1 H2 within 15 s at 291 K, which are higher than M alloy without any catalyst (38.151 mL⋅g−1 H2). It is worth noting that M-10SnO2 rapidly release 395.4 mL⋅g−1 H2 with 51.35% yield in 2 min at 298 K. The difference between the H2 generation yields is mainly originated from the activity of catalysts on nucleation and growth of Mg(OH)2 in the hydrolysis reaction stage. Moderate initial nucleation rate and the subsequent sufficient growth of Mg(OH)2 nucleus are prerequisites to ensure fast initial hydrogen production rate and high H2 generation yield. Catalysis is an effective means to ameliorate the hydrogen performance of Mg-based alloys, and it is important to choose the appropriate catalyst type. However, the degree of catalysis determined by the content of the catalyst and the manner of addition is also worthy of attention.

Materials with low density, exceptional thermal and corrosion resistance, and ultrahigh mechanical and electromagnetic interference (EMI) shielding performance are urgently demanded for aerospace and military industries. Efficient design of materials' components and microstructures is crucial yet remains highly challenging for achieving the above requirements. Herein, a strengthened reduced graphene oxide (SrGO)-reinforced multi-interfacial carbon-silicon carbide (C-SiC)n matrix (SrGO/(C-SiC)n) composite is reported, which is fabricated by depositing a carbon-strengthening layer into rGO foam followed by alternate filling of pyrocarbon (PyC) and silicon carbide (SiC) via a precursor infiltration pyrolysis (PIP) method. By increasing the number of alternate PIP sequences (n = 1, 3 and 12), the mechanical, electrical, and EMI shielding properties of SrGO/(C-SiC)n composites are significantly increased. The optimal composite exhibits excellent conductivity of 8.52 S·cm-1 and powerful average EMI shielding effectiveness (SE) of 70.2 dB over a broad bandwidth of 32 GHz, covering the entire X-, Ku-, K-, and Ka-bands. The excellent EMI SE benefits from the massive conduction loss in highly conductive SrGO skeletons and polarization relaxation of rich heterogeneous PyC/SiC interfaces. Our composite features low density down to 1.60 g·cm-3 and displays robust compressive properties (up to 163.8 MPa in strength), owing to the uniformly distributed heterogeneous interfaces capable of consuming great fracture energy upon loadings. Moreover, ultrahigh thermostructural stability (up to 2100 °C in Ar) and super corrosion resistance (no strength degradation after long-term acid and alkali immersion) are also discovered. These excellent comprehensive properties, along with ease of low-cost and scalable production, could potentially promote the practical applications of the SrGO/(C-SiC)n composite in the near future.

Mg10Ni-MoS2 composites were synthesized, and the amount of molybdenum disulfide (MoS2) and ball milling time was optimized to obtain rapid initial kinetics with high conversion yield at room temperature in simulated seawater. The microstructures and H2 generation thermodynamics were comprehensively investigated to demonstrate the main influential factors on excellent initial hydrolysis performance. Mg10Ni-5 wt%MoS2-15 min can generate 493.3 mL·g-1 H2 at 298 K with 58% yield in 20 s. The H2 generation capabilities of Mg10Ni-5 wt% MoS2-15 min are 569 mL·g-1 H2 and 67%, which are higher than those of Mg10Ni (495 mL·g-1 H2, 56%) in 2 min. The lowest hydrolysis activation energy (18.74 kJ·mol-1) can be achieved by Mg10Ni-5 wt%MoS2, which means low energy consumption. Mg10Ni with higher specific surface area (4.04 m2⋅g-1) than that of Mg10Ni-5wt.%MoS2-15 min (0.78 m2⋅g-1) presents worse H2 generation performance, indicating that higher specific surface area is the secondary determinant for superior initial hydrolysis kinetics and higher conversion yield compared with the added MoS2. The added MoS2 with specific morphologic structure can provide auxiliary mass transfer paths, which shorten the transfer distance and destroy the continuous colloidal layer. Mg-rich alloys optimized for rapid and efficient H2 production performance are expected to be applied large-scale H2 generators.

TiO2 microtubes with tunable wall thickness have been synthesized by a one-step electrospinning method linked with a calcination process. The wall thickness of TiO2 microtubes can be easily tuned by altering the dosage of liquid paraffin. The influence of the thickness on the light-harvesting ability and separation efficiency of the photogenerated carriers was studied using ultraviolet–visible (UV–vis) diffuse reflectance spectroscopy, photoluminescence emission spectroscopy, and photocurrent density measurements. Results show that TiO2 microtubes with an appropriate thickness exhibit enhanced light scattering effect, UV–vis light-harvesting ability, charge separation efficiency, and photocatalytic performance. The degradation rates of rhodamine B and 2,4-dinitrophenol by using TiO2 microtubes synthesized at a dosage of 0.14 g/mL liquid paraffin are 99.9% within 60 min and 97.8% within 40 min, respectively, which are higher than most of the reported values. All these results suggest that our work provides an ideal strategy for adjusting the wall thickness of TiO2 microtubes and new approach to enhance the photocatalytic performance of TiO2.

Increasing attention has been focused on potassium ion batteries (KIBs) as promising energy-storage system (ESS) owing to the abundance and low-cost of potassium resources. Here, SnS2/SnO2 heterostructures were successfully fixed onto stainless steel mesh (SnS2/SnO2/SSM) through a facile two-step hydrothermal method and used as anodes for KIBs. Due to the advantages of SnS2/SnO2 heterostructures and good conductivity of SSM substrate, the SnS2/SnO2/SSM anodes display enhanced electrochemical performance. The SnS2/SnO2/SSM anodes deliver specific capacity of 394 mA h g−1 at 50 mA g−1 over 100 cycles, better than SnO2/SSM. Even at 500 mA g-1 after 250 cycles, high capacity of 155 mA h g−1 can still be obtained.

Potassium-ion batteries (KIBs) have becoming a prospective energy storage technique, due to the abundant potassium resources in the earth crust, approximate redox potential and similar electrochemical behavior of potassium and lithium. However, the insufficient capacity, poor stability and volume expansion of electrode materials during charge and discharge are main factors restricting the further development of KIBs. This work reports an amorphous carbon coated SnO2 nanohseets on hard carbon hollow spheres (AC/SnO2@HCHS) anode with enhanced potassium storage performance. The HCHS acts as a carrier for SnO2 nanosheets, providing high electrical conductivity and stable skeleton. The self-assembled SnO2 nanosheets with high surface area ensures sufficient contact with the electrolyte. Amorphous carbon wrapping can not only relieve SnO2 volume expansion but also provide surface-induced capacitive capacity. As a consequence, the AC/SnO2@HCHS anode presents excellent potassium-ion storage performance with high discharge capacity of 346 mAh g-1 at 0.1 A g-1 over 200 cycles, ultra-long cycling lifetime and outstanding rate capability (236 mAh g-1 at 1 A g-1 over 1000 cycles).

The as-cast magnesium–nickel–cerium (Mg–Ni–Ce) alloys with nominal component (Mg–10 wt% Ni)1−xCex (x = 0, 5, 10, 15 wt%) are optimized by high-energy ball milling (HEBM). Expandable graphite (EG) and molybdenum disulfide (MoS2) have been introduced as surface catalysis to form (Mg10Ni)95Ce5–5 wt% EG–5 wt% MoS2 composite. The synergetic effects of HEBM and catalysts on H2 production of (Mg10Ni)95Ce5 are comprehensively studied. The thermodynamics are studied by H2 generation curves fitting. The HEBM 0Ce, 5Ce, 10Ce and 15Ce alloys at 291 K can generate 530, 747, 720 and 487 mL g−1 H2 with conversion yields of 59%, 87%, 89% and 64% in initial 15 min, respectively. The addition of surface catalysts EG–MoS2 can further enhance the initial hydrogen generation rate and the final conversion yield within short period at room temperature. 773 mL g−1 H2 corresponding to 95% conversion yield can be obtained by HEBM (Mg10Ni)95Ce5–EG–MoS2 within 1 min at 291 K. The synergetic effects of HEBM and EG–MoS2 can promote rapid initial generation rate and high conversion yield of hydrolysis hydrogen generation of (Mg10Ni)95Ce5–EG–MoS2 composite. This work indicates a promising way to synthesize Mg-based alloys with rapid initial hydrolysis H2 generation kinetics and high conversion yield within a short period.

Suitable anode materials for potassium ion batteries (KIBs) with high capacity, good reversibility and stable cycling performances are still in large demand. Here, flexible N doped carbon/bubble-like MoS2 core/sheath framework (MoS2/NCS) is prepared as an anode material for potassium ion batteries. The N doped carbon sponge (NCS) skeleton with good conductivity and high surface area guarantees superior rate capability and high stability of MoS2/NCS anode. The chemical bonds (C Mo) firmly bridge MoS2 and NCS together, which further ensures MoS2/NCS stable cycling performance. More importantly, volume expansion is greatly buffered during cycling by this unique structure: the voids between bubble-like MoS2 sheath and NCS core can effectively buffer volume expansion generated during potassium intercalation/deintercalation; the enlarged interlayer spacing contribute more space to buffer volume change; the ultrathin nanosheets can shorten the charge diffusion distance and buffer volume change. As a consequence, MoS2/NCS delivers a capacity of 374 mAh g−1 over 200 cycles at 50 mA g−1. Even at 1000 mA g−1, a capacity of 212 mAh g−1 can still be obtained over 1000 cycles. We believe this MoS2/NCS structure will highlight the potential of MoS2 in practical KIBs applications.

Constructing a hierarchical structure with tunable pore size is a practical method to improve the capacity of photocatalytic hydrogen production of catalysts. In this work, titanium dioxide/graphitic carbon nitride (TiO2/g-C3N4) nanofibers with hierarchical meso/macro-porous structure are fabricated by combining a one-step electrospinning method and calcination process, in which the hierarchical meso/macro-porous structure is developed by introducing polyvinylpyrrolidone and liquid paraffin into the electrospinning solution. Comprehensive characterizations reveal that the hierarchical meso/macro-porous TiO2/g-C3N4 nanofibers have improved ultraviolet-visible light absorption, the separation efficiency of carriers, and photocatalytic performance. The photocatalytic H2 evolution is up to 1202 μmol g−1 in 7 h, which is better than those of corresponding TiO2/g-C3N4 photocatalysts previously reported. This work provides a new strategy to build a hierarchical meso/macro-porous nanofiber and an ideal solution to improve the hydrogen production of TiO2/g-C3N4.

In this study, we developed as-cast (Mg10Ni)1-xCex (x = 0, 5, 10, 15 wt%) ternary alloys by using a flux protection melting method and investigated their hydrolysis hydrogen generation behaviour in simulate seawater. The phase compositions and microstructures of as-cast (Mg10Ni)1-xCex ternary alloys are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) equipped with electron energy dispersion spectrum (EDS) and transition electron microscope (TEM). Their kinetics, thermodynamics, rate-limiting steps and apparent activation energies are investigated by fitting the hydrogen generation curves at different temperatures. With increasing Ce content, the (Mg10Ni)1-xCex ternary alloys show increased electrochemical activities and decreased eutectic. When 10 wt% and 15 wt% Ce added, the active intermediate phase of Mg12Ce has been observed. The hydrogen generation capacity of (Mg10Ni)95Ce5 is as high as 887 mLg−1 with a hydrolysis conversion yield of 92%, which is higher than that of Mg10Ni alloys (678 mLg−1) with a yield only 75% at 291 K. The initial hydrolysis reaction kinetics of Mg–Ni–Ce alloys is mainly controlled by the electrochemical activity and the mass transfer channels formed in the alloys. Such a structure-property relationship will provide a possible strategy to prepare Mg-based alloys with high hydrogen conversion yield and controlled hydrolysis kinetics/thermodynamics.

Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries (LIBs) in view of the natural abundance and low cost of sodium resource. Constructing high-performance anode is essential and challenging for the futuristic SIBs development. Transition metal sulfides have been proved as promising anode materials for SIBs due to their large specific capacities. Here, in situ assembly of cobalt sulfide nanosheets on stainless steel mesh (SSM/CoS) as a binder-free anode for SIBs is carried out through a facile electrochemical deposition procedure. The SSM/CoS products are directly used as anode electrodes without addition of binder and conductive additives. As a result, a high capacity of 313 mAh g−1 is obtained at a current density of 50 mA g−1 over 100 cycles.

Potassium-ion batteries (KIBs) have attracted intensive attention in recent years due to the resource-abundance and low cost of potassium. Here, for the first time, SnO2 nanosheets grown on stainless steel mesh (SnO2/SSM) were used as a novel binder free anode for KIBs. A high capacity of 351 mAh g−1 is achieved after 100 cycles at current density of 50 mA g−1. Even more, a high capacity of 128 mAh g−1 can be obtained at 1000 mA g−1 after 200 cycles. These good electrochemical performances are mainly due to the large surface area of SnO2 nanosheets and the roles of current collector and stable conductive skeleton SSM played.

Achieving high-stability, long span-life, and fast sodiation reaction kinetics in sodium ion battery (SIB) can significantly promote its practical application. Here, we use freeze-drying and carbonization to prepare a flexible N-doped silk wadding-derived carbon/SnOx@reduced graphene oxide (N-SWC/SnOx@rGO) film as an ultra-stable anode for a half/full SIB. A superior capacity of 572.2 mA h g−1 at 0.1 A g−1 and long span-life over 1000 cycles are obtained in the N-SWC/SnOx@rGO film anodes. Moreover, a super-stable capacity of 245.7 mA h g−1 can be secured in the assembled SIB full cell, outperforming the current studies. After the detailed structural and performance characterization, we attribute these superior capacities to the following unique structural characteristics: 1) SnOx nanoparticles (

The as-cast Mg-Ni alloy with nominal component Mg-10 wt%Ni (Mg10Ni) is successively modified based on the internal refinement by melt-spinning and external decoration through surface catalysis. The isothermal hydrogenation kinetics, absorption/desorption thermodynamics, hysteresis and non-isothermal desorption of modified Mg-rich alloys are investigated in this work. The results of modification indicate that the alloying and refinement microstructure are the foundation for high capacity and rapid kinetics. The active surface is the precondition to achieve the above-mentioned process. MWCNTs especially MWCNTs coupling with TiF3 can easily activate the Mg-10 wt%Ni alloy and promote rapid absorption/desorption kinetics by H2 dissociation and H-atoms auxiliary diffusion. Mg-rich Mg-Ni alloy after internal refinement and external decoration with MWCNTs and TiF3 possesses superior thermodynamics and hysteresis. As high as 5.5 wt% hydrogen can be rapidly absorbed within 60 s and the endothermic peak is around 374 °C, which shifts toward low temperature as high as ∼75 °C than that of Mg-10 wt%Ni alloy without any catalysts. It is the synergistic catalytic effect originated from the assisted diffusion of MWCNTs and the surface spillover special effects of TiF3 that promote the outstanding thermodynamics and hysteresis for Mg10Ni-MWCNTs-TiF3.

In this work, La-doped Mg-Ni multiphase alloys were prepared by resistance melting furnace (RMF) and then modified by high-energy ball milling (HEBM). The hydrolysis H2 generation kinetics/thermodynamics of prepared alloys in NaCl solutions have been investigated with the help of nonlinear and linear fitting by Avrami-Erofeev and Arrhenius equations. Combining the microstructure information before and after hydrolysis and thermodynamics fitting results, the hydrolysis H2 generation mechanism based on nucleation & growth has been elaborated. The final H2 generation capacities of 0La, 5La, 10La and 15 La alloys are 677, 653, 641 and 770 mL·g − 1 H2 in 240 min at 291 K, respectively. While, the final H2 generation capacities of HEBM 0La, 5La, 10La and 15 La alloys are 632, 824, 611 and 653 mL·g − 1 H2 in 20 min at 291 K, respectively. The as-cast 15La alloy and HEMB 5La alloy present the best H2 production rates and final H2 production capacities, especially the HEBM 5La can rapidly achieve high H2 generation capacity (670 and 824 mL·g − 1 H2) at low temperature (291 K) within short time (5 and 20 min). The difference between the H2 generation capacities is mainly originated from the initial nucleation rate of Mg(OH)2 and the subsequent processes affected by the microstructures and phase compositions of the hydrolysis alloys. Relative low initial nucleation rate and fully growth of Mg(OH)2 nucleus are the premise of high H2 generation capacity due to the hydrolysis H2 generation process consisted by the nucleation, growth and contacting of Mg(OH)2 nucleus. To utilization H2 by designing solid state H2 generators using optimized Mg-based alloys is expected to be a feasible H2 generation strategy at the moment.

Mg alloys hydrolysis is considered as an environmentally friendly and efficient hydrogen production method. In this work, residuary industrial Mg alloy waste (IMAW) employed in hydrolysis process is creative and meaningful to promote ‘Green hydrogen’ strategy. To explore proper hydrolysis systems and effective modification ways, various IMAW and the short-term ball-milling effect are systematically investigated. To achieve rapid initial kinetic and high hydrogen capacity, (Mg10Ni90)Ce10 (MNC) is firstly introduced to further modify AZ91D and ZK60. The microstructure evolution, thermodynamic behavior and modified mechanism are investigated to analyze the role of MNC in hydrolysis process. AZ91D and ZK60 attle after activated by MNC obtain 0.81 and 0.56 H2 yield in initial 2 min, higher than samples without MNC (0.56 and 0.04). Meanwhile, the maximum hydrogen generation rates can reach 340.9 and 262.8 mL·g−1·min−1. The hydrolysate morphologies of IMAW before and after activation are confirmed to change from dense and continuous to loose and granular, and the Ea are greatly reduced. The modified mechanism based on the micro-local temperature acceleration is proposed and elaborated. IMAW modified by MNC achieves a green and effective H2 generation process, which can pave way for portable hydrogen generators and industrial hydrogen generation system.

UDP-glucose pyrophosphorylase (UGPase) is an important pyrophosphatase that reversibly catalyzes the synthesis of UDP-glucose during glucose metabolism. We previously found that the deletion of UGPase may affect structure, growth, the virulence of Brucella, and the activation of cellular NF-κB. However, the exact mechanism of activation of NF-κB regulated by Brucella UGPase is still unclear. Here, we found for the first time that UGPase can regulate the expression of virB proteins (virB3, virB4, virB5, virB6, virB8, virB9, virB10, and virB11) of type IV secretion system (T4SS) as well as effectors (vceC, btpA, btpB, ricA, bspB, bspC, and bspF) of Brucella by promoting the expression of ribosomal S12 protein (rpsL), BMEI1825, and quinone of 2,4,5-trihydroxyphenylalanine (topA) proteins, and further inhibits the activation of cellular NF-κB and affects the virulence of Brucella. Our findings provide new insights into the mechanism used by Brucella to escape the immune recognition, which is expected to be of great value in the designing of Brucella vaccines and the screening of drug targets.

To optimize the hydrolysis hydrogen generation process of Mg-based alloy and solve the problem of energies shortage without environmental risk, a green and reasonable regulation strategy of hydrolysis medium is proposed to ensure the conversion from grey hydrogen to green hydrogen. In this work, green modification hydrolysis medium strategy employed neutral alkali metal cations instead of acidized/alkalized ions is proposed to utilize for hydrolysis of (Mg10Ni)10Ce alloy. The green regulation of seawater by introducing the low cost neutral alkali metal cations is tried. The results are as follows: The as-cast (Mg10Ni)10Ce alloy hydrolysis induction period is the shortest and the H2 yield is the highest with 173.38 mL g−1 in KCl solution within 20 min at 25 °C. The hydrolysis hydrogen generation yield of modified seawater by the neutral alkali metal cations are first higher and then lower than that in the seawater. The hydrolysis process of (Mg10Ni)10Ce in alkali metal cations medium confirms that the type and content of ions has significant effects on the diffusion and transmission process of the medium. It is expected to lay a solid foundation for the development of green portable hydrogen generators and the widespread of clean hydrogen energy and emission reduction.

Sn-based materials show great potentials as sodium-ion battery (SIB) anodes. However, limited to the preparation process and expensive raw materials, it is a great challenge to large-scale produce self-standing Sn-based materials. Herein, we develop a cost-effective and large-scale production method to fabricate flexible B4C/Sn/acetylene black@reduced graphene oxide (B4C/Sn/AB@rGO) films as self-standing SIB anodes by using high energy ball milling technology and self-standing process. In the film, the coated B4C acts as a conductor to enhance the internal conductivity and AB is used as a shell of B4C/Sn to accelerate the absorption of electrolyte solution, while rGO plays a role as a tie to connect B4C/Sn/AB units to accelerate the electronic transmission and simultaneously alleviate the volume expansion during the charge/discharge process. Finally, the B4C/Sn/AB@rGO films as the SIB anodes deliver a high reversible capacity of 393.4 mA h g−1 at 0.1 A g−1 and excellent cycling stability at 1 A g−1 with the reversible capacity of 155.5 mA h g−1 over 500 cycles. Moreover, the assembled sodium-ion full cell shows a stable capacity at 201.5 mA h g−1 for 50 cycles at 0.1 A g−1. This study indicates that our synthetic B4C/Sn/AB@rGO film has a great potential as the self-standing SIB anode.

Porous media has a significant effect on flame and overpressure of methane explosion. In this paper, the pore diameter and thickness of porous media are studied. Nine experimental combinations of different pore diameter and thickness on the propagation of flame and overpressure of methane explosion in a tube are analyzed. The results show that the porous media not only can suppress the explosive flame propagation, but the porous media with large pore diameter can cause deflagration and accelerate the transition of flame from laminar to turbulent. The pore diameter of the porous media mainly determines the quenching of the flame. Simply increasing the thickness of porous media may cause the flame to temporarily stop propagating, but the flame is not completely extinguished for larger pore diameter. However, the deflagration propagation speed of flame is affected by the thickness. The attenuation of overpressure by porous media is mainly reflected in reducing the duration of overpressure and the peak value of overpressure. The smaller the pore diameter, the greater the thickness, and the more remarkable the reduction in overpressure duration and peak value. Suitable pore diameter and thickness of porous media can effectively suppress flame propagation and reduce the maximum value and duration of overpressure.

Ultrathin SnS2 layers with high theoretical specific capacity displays promising advantages as an anode in sodium storage systems. However, their poor conductivity and large capacity loss during charging/discharging process are urgently needed to be addressed. Herein, an exotic hierarchical SnS2/carbon nanotube@reduced graphene oxide (SnS2/CNT@rGO) composite has been designed and developed to be an anode for sodium-ion batteries. Functionally, the CNT penetrates into the petals of SnS2 micro-flowers to increase the conductivity of SnS2, while the three-dimensional rGO wraps around the SnS2/CNT composite to relieve the volume expansion of SnS2 during the charging/discharging process and construct “rGO conductive bridge” to accelerate electrode reaction kinetics. Benefiting from these exotic functionalization, the SnS2/CNT@rGO anode possesses excellent reversible capacity and superior cycling stability with a high reversible capacity of 528 mA h g−1 at 50 mA g−1 and a retained capacity of 301 mA h g−1 after 1000 cycles at 1 A g−1, which are better than most of the previously reported Sn-based and carbon-based anode materials. This study offers a promising strategy for significantly improving the cycling stability in the ultra-stable electrode materials in sodium-ion batteries.

Potassium-ion batteries (KIBs) have been regarded as prospective energy storage system due to the rich reserves and affordable price of potassium resources. However, the lack of high-capacity electrode materials still inhibits the further development of KIBs. Here, we report a unique hollow metallic Co0.85Se cubes encapsulated in graphene (Co0.85Se/G) for KIBs anode. The unique hollow structure features high surface area that guarantees Co0.85Se enough contact with electrolyte. The graphene wrapping blocks the agglomeration and relieves the volume changes of Co0.85Se. The metallic property of Co0.85Se and high conductivity of graphene can boost the rate performance. As a consequence, Co0.85Se/G delivers a high capacity of 324 mAh g−1 at 50 mA g−1 over 200 cycles, and the capacity can be kept at 213 mAh g−1 even at of 1000 mA g−1 over 1000 cycles.

Potassium-ion batteries (KIBs) have been considered as a promising alternative to lithium-ion batteries (LIBs) due to the diffusely distributed and low-cost potassium resources and high operating voltage. However, achieving satisfactory battery performance is still a main challenge for KIBs development. Here, ultrathin metallic cobalt selenide (CoSe2) nanosheets are successfully assembled onto three-dimensional nitrogen doped carbon foam (CSNS/NCF) bridged by Co-C and Co-N-C bonds as a flexible core/sheath framework for potassium storage. The CSNS/NCF not only features with large surface area for sufficient contact with electrolyte with fast electrons and K ions diffusion but also provides a robust network with strong chemical bonds for stable potassium storage. Density functional theory (DFT) calculations show that the barrier for K atom migration in ultrathin CoSe2 nanosheets is lower than that in bulk CoSe2. Benefiting from the above advantages, the optimized CSNS/NCF displays a high specific capacity of 335 mAh g−1 after 200 cycles at 50 mA g−1. This work provides a practical approach to construct advanced anode materials for KIBs systems.

Carbon nanotube/graphene foam/silicon carbide (CNT/GF/SiC) composites are prepared by in-situ growth of CNT in GF and followed by infiltration and pyrolysis of CNT-dispersed polycarbosilane. Results show that the CNT/GF/SiC composites exhibit outstanding electromagnetic interface (EMI) shielding effectiveness (SE) of 32.1 dB in X-band, especially the specific SE reaches up to 33.8 dB cm3/g with a low density of 0.95 g/cm3. The interconnected conductive graphene network improves the conductivity and sharply increases electric loss; meanwhile, the rich structural defects and multiscale interfaces including GF-CNT interface and CNT-SiC interface offer additional polarization loss, both of which endow composites with outstanding EMI shielding performance.

Owing to the rich abundance and low-cost of K resources, potassium-ion batteries (KIBs) have been a promising alternative to lithium-ion batteries (LIBs). The exploration of suitable anode materials is challenging but of great importance for KIBs development. Alloying anodes such as Sn, Sb and their oxides have been proved as promising anode materials for KIBs due to their high specific capacities. Here, Sn nanoparticles uniformly anchored on N doped porous carbon (Sn/NPC) are prepared using simple sol-gel method and heat treatment. As support skeleton, NPC endows Sn/NPC good conductivity and prevent agglomeration of Sn nanoparticles, which can be beneficial for high capability and rate performance. When evaluated as anode of KIBs, enhanced capacity of 198 mAh g−1 is achieved at a current density of 50 mA g−1 after 200 cycles.

By cutting electro-deposited nickel plates at different angles between the rolling planes and the growth plane, we obtained bulk samples with different initial textures. We investigated the microstructures, macrotextures, and microhardness of such samples before and after cold rolling. The results showed that the samples cut at different angles have different initial textures before the cold rolling, and their microstructures changed from isotropic crystals to columnar ones as the cutting angle increased. After cold rolling, the deformed microstructures textures were the same. However, the microhardness of the material was closely related to the cutting angle. As the cutting angle increased, the microhardness decreased significantly. This phenomenon is associated with the dimensional differences between the axial and horizontal directions of the columnar crystal grains of the electro-deposited materials.

Recycle and reuse of the nanosized photocatalysts is a common challenge in the catalyst field. To address this issue, we rationally load meso‑carbon@TiO2 core-shell microspheres on carbon fiber felt to synthesize macro-sized meso‑carbon@TiO2/carbon fiber composites by an in-situ adsorption method. From the detailed microstructural and spectroscopic characterization, it has been found that the absorption edge of meso‑carbon@TiO2 core-shell microspheres is extended to the visible light region, and the recombination of photon-excited electrons and holes can be significantly suppressed when compared with P25 TiO2 powder. The experiment results of meso‑carbon@TiO2/carbon fiber composites indicates that the photocatalytic degradation rate under UV–vis light is much higher than that under visible light irradiation due to the higher charge carrier separation efficiency and the higher electron consumption of the direct Z-scheme. Moreover, the photocurrent density and the separation of photon-excited electrons from holes can be effectively promoted in the photoelectrocatalysis of meso‑carbon@TiO2/carbon fiber composites under visible light. The synergistic effect between electrocatalytic and photocatalytic oxidation under visible light results in almost complete degradation of Rhodamine B. Our study provides an avenue to recycle and reuse nanosized photocatalysts and open a possibility for practical industrial application of photocatalysis and photoelectrocatalysis using separable and recyclable meso‑carbon@TiO2/carbon fiber composites.