Search

WBE has now become a complimentary tool in SARS-CoV-2 surveillance. This was preceded by the established application of WBE to assess the consumption of illicit drugs in communities. It is now timely to build on this and take the opportunity to expand WBE to enable comprehensive assessment of community exposure to chemical stressors and their mixtures. The goal of WBE is to quantify community exposure, discover exposure-outcome associations, and trigger policy, technological or societal intervention strategies with the overarching aim of exposure prevention and public health promotion. To achieve WBE's full potential, the following key aspects require further action: (1) Integration of WBE-HBM (human biomonitoring) initiatives that provide compre-hensive community-individual multichemical exposure assessment. (2) Global WBE monitoring campaigns to provide much needed data on exposure in low-and middle-income countries (LMICs) and fill in the gaps in knowledge especially in the underrepresented highly urbanised as well as rural settings in LMICs. (3) Combining WBE with One Health actions to enable effective interventions. (4) Advancements in new analytical tools and methodologies for WBE progression to enable biomarker selection for exposure studies, and to provide sensitive and selective multiresidue analysis for trace multi-biomarker quantification in a complex wastewater matrix. Most of all, further developments of WBE needs to be undertaken by co-design with key stakeholder groups: government organisations, health authorities and private sector.

Extrusion-based (fused filament fabrication) three-dimensional (3D) printing of shape-memory polymers (SMPs) has the potential to rapidly produce highly customized smart-material parts. Yet, the ef...

Novel recycling technologies aim at increasing material efficiency by turning former waste products into valuable reclaimed resources. A key question is whether such technologies really reduce primary resource consumption or instead stimulate aggregated market demand. In this study the consequences of a positive shock in ferrochrome supply to the global stainless steel value chain is assessed quantitatively. This new source might be unlocked by technology under development for the recovery of chromium from carbon and stainless steel slags. The aim of this study is to quantitatively assess the income and substitution effects of reclaimed ferrochrome along a part of the stainless steel value chain. The impact of the supply shock is analysed by means of a vector autoregression (VAR), a dynamic model where lagged values of all included variables estimate current state of the system. Additionally, the VAR model is extended to a structural vector autoregression (SVAR) to account for contemporary effects as well. Both the VAR and SVAR model indicate that additional ferrochrome supply leads to an increase in aggregated supply of stainless steel, in combination with a substitution effect between ferrochrome and nickel. The extended SVAR model additionally highlights that contemporaneous effects do play an important role as well to capture the direct rebound effect in the ferrochrome market when working with quarterly data. In other words, an additional supply of reclaimed ferrochrome triggers a complex combination of interactions and consequences, yet it does not necessarily lead to a lower overall material consumption. The main contributions of this paper are the assessment of direct rebound effects of supplying reclaimed metals along the value chain and the demonstration that quantifying the effects of circular strategies is feasible.

Cold metal transfer arc additive manufacturing technique was used to produce 5356 aluminum alloy by adding refining agents to solve the problems of coarse grains and poor performance. Metallic powd...

Many users relate additive manufacturing (AM) directly with fast and high-quality prototyping and manufacturing. Nevertheless, already within the different printing techniques there are significant...

Current wood-plastic materials available for selective laser sintering (SLS) are limited and often suffer from low-quality and mechanical strength. In this study, a new composite of peanut husk pow...

There is in-depth understanding of the effects and interactions of various process parameters on the mechanical properties and dimensional accuracy of parts produced through fused filament fabricat...

The transparent relaxor ferroelectric ceramics of the system lanthanum modified lead magnesium niobate (PLMN-13PT) have been investigated for a variety of electro-optic, properties; good electro-optic switching times and modest half-wave voltages. In this work, the dependence of microstructural, structural, dielectrical, optical, and electro-optical properties in function of Rare Earth (RE = Tm3+, Nd3+, Yb3+, Er3+ and Ho3+) has been reported. PLMN-13PT:RE with excellent properties were obtained, highlighting the electrical, optical, and electrooptical properties, suitable for the fabrication of multifunctional devices. The most prominent or important feature is the largest quadratic Electro-optic coefficient achieved ((9.37 ± 0.39) × 10−16 m2/V2) corresponding to PLMN-13PT:Ho transparent ceramics. This result in addition to the electrical and photoluminescence properties becomes a promising alternative to building multifunctional devices.

This paper presents an experimental investigation on the durability properties of metakaolin (MK) and bottom ash (BA) blended geopolymer under different environmental exposure. The blended geopolymer concrete (GPC) was prepared with sodium based alkaline activators under ambient curing temperature. The concentration of sodium hydroxide used was 8 M. The ratio of sodium silicate to sodium hydroxide was kept as 2.0. The performance of blended geopolymer concrete was compared with conventional concrete (CC). The test results reveal that blended geopolymer concrete develops a better performance against sulphate and acid resistance. Also, MK-BA GPC shows enhanced performance over the conventional concrete in terms of sorptivity, rapid chloride and water absorption.

Recent advances in digital workflow have transformed clinician's ability to offer patient-specific devices for medical and dental applications. However, the digital workflow of patient-specific max...

In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) analysis, respectively. Furthermore, bioactivity, antibacterial, and cytotoxicity evaluation of PDC scaffolds were conducted. The microstructural analysis determined that scaffolds have interconnected porous network with two different pore range size favorable for osteointegration and bone formation. The structural analysis confirmed that fabricated glass-ceramic scaffolds contain bioactive octacalcium phosphate (OCP) phase responsible for enhanced bioactivity and HCA formation during the immersing of scaffolds in simulated body fluid (SBF) for several days. Moreover, PDC scaffolds with Ag nanoparticles showed considerable antibacterial properties against Gram-negative Klebsiella pneumoniae and Gram-positive Staphylococcus aureus bacteria cells. This study has demonstrated that it is possible to develop a novel group of antibacterial and bioactive Ag incorporated silicate-phosphate glass-ceramic scaffolds for BTE applications, such that, it was verified in vivo.

Fluoride is a natural contaminant of water – that endangers many people worldwide when present in concentrations higher than 2 ppm. Here, fluoride removal by four different nanostructured colloidal particles (SiO2@ZrO2nc, SiO2@ZrO2c, @ZrO2nc, and @ZrO2c) was measured in batch systems within a period of 24 h. Surprisingly, these materials removed fluoride from the water solutions and reached equilibrium in less than 10 min. The combination of high specific surface and fast fluoride removal placed these materials among the top materials currently known in fluoride removal. Also, the impact of element leaching was measured and quantified. The influence of time, pH, and fluoride concentration on leaching of Zr and Si was evaluated with a response surface methodology. Leaching of Zr and Si continued for several hours and depended on first-order, quadratic and cross-product coefficients. Previous studies of fluoride removal with zirconium oxide often assumed that a decrease in fluoride concentration in the solution indicated that fluoride was bound to the surface of the oxide. Zirconium oxide's solubility in water is low, but not zero. Hence, Zr might have formed soluble fluorocomplexes. This is the first report of fluoride removal with zirconium oxide that studied the leaching of the solid to exclude the formation of soluble fluorocomplexes.

In the present work, samples of barium borate glasses containing different molar ratios of ZnO were prepared using the conventional melt-quenching technique. X-ray diffraction studies confirmed the amorphous nature of the studied materials. Structural analysis using FT-Infrared confirmed the incorporation of the Zn atom in the glass matrix as a ZnO4 unit and the existence of ZnO in the tetrahedral interstitial sites. TEM images for the studied materials show that the average particle size is about 20 nm and the ZnO4 structural units reside in the glass matrix with high homogeneity. Density and molar volume studies manifested an increase in the density as the amount of ZnO increases and a subsequent decrease in the molar volume. UV absorption studies showed a blue shift in the absorption peak from 343 nm to 315 nm. Additionally, an observed reversible behavior around 338 nm divides the absorption range into high energy and low energy regions. In the high energy region, both absorbance, absorption coefficient, and refractive index increased with ZnO content increment. In the low energy region, this behavior was reversed, and the calculated values of the refractive index agreed with the measured ones in this region. Studies of optical dielectric parameters showed a Debye-type relaxation process in which increasing the ZnO content shortens the sample relaxation time. Our results, collectively, suggest the studied materials for several optoelectronic device applications such as high-energy optical filters, optical switches, and frequency converters.

The effect of Dysprosium concentration has been studied in glasses of the system 30 SiO2 + 30 Li2O + (40−x) B2O3 + x Dy2O3 glass system where x = 0.5, 1, 2.5, 5 and 10 mol%. FT-IR studies were performed to understand the functional groups of the network involved in the host glass. The optical band gap is found in the range of 3.84–3.5 eV. From the absorption spectra, the experimental data were compared with the theoretical data computed by Judd–Ofelt theory. Nephelauxetic ratio (β) and bonding parameters (δ) computed using the absorption spectrum. The Judd–Ofelt parameters (Ω2, Ω4, and Ω6) obtained demonstrates the covalent and asymmetric nature of dysprosium ions. From the visible emission spectra, the intensity ratios were calculated from yellow to blue and the relative differences were discussed based on the concentration of Dy3+ ions. CIE chromaticity coordinates were calculated for all glass samples. A CIE chromatogram shows a glass containing 0.5 mol% Dy2O3 with color coordinates X = 0.32 and Y = 0.33 with the highest emission intensity. These glasses have great potentials for lasers and white LEDs (Light-Emitting Diode) applications.

This study explored the variations in oxidative stress markers in Parasitized and non- Parasitized Amietophrynus regularis in diverse conditions such as OCP-exposed, unexposed, parasitized, and unparasitized conditions. The toad specimens were collected from natural habitats and dumpsites of three (3) major areas of Lagos. 15g wet weight of the liver, intestine, and parasites were prepared and analysed for oxidative stress parameters including; SOD, CAT, GSH, and MDA activities according to well established protocols. Based on stations, there were significant differences in the SOD and MDA levels in the liver and intestine of uninfected toads obtained at the habitat and the dumpsite. Only SOD had a significant difference in the infected toads. Also, the concentration of SOD in the parasites recovered from the toads at the dumpsite was very much significantly higher than the concentration in those recovered from the toads at the natural habitat (p

Over the past two decades, electrospinning has emerged as a common technique to produce biomedical scaffolds composed of ultrafine fibers formed from many natural and synthetic polymers. A major ad...

Several crucial and impactful three-dimensional (3D) printing applications have been developed within a broad range of fields. Among these, revolutionary changes in health care are highly anticipat...

Yttrium aluminum garnet (YAG) with cerium admixture (Ce:YAG) was plasma sprayed using two different devices – gas-stabilized plasma (GSP) torch and water-stabilized plasma (WSP) torch. Coatings on stainless steel as well as self-standing plates were produced. Besides microstructure and crystallographic characterizations, dielectric tests were performed on these coatings. They included capacitance (i.e. relative permittivity), loss tangent and volume resistivity measurements. After spraying, the YAG crystal phase was preserved without any decomposition, but an amorphous fraction was detected in the as-sprayed coatings deposited by both processes. The dielectric behavior of the coatings was influenced by imperfections like splat boundaries, pores and thin cracks. The Ce:YAG samples were successfully plasma sprayed by both spray techniques. Selected aspects of wear were measured and compared with a single-crystal. The dielectric properties are comparable with the single-crystal and highly promising, particularly the loss tangent with values so low that they were not found in any other as-sprayed ceramic coating.

In this work it is demonstrated the capacity of the sol–gel process to obtain materials with different phases, using the same chemical composition, and modifying only the conditions of hydrolysis and condensation. This method combined with the polymer sponge replica technique allowed to obtain a porous and three-dimensional scaffold, called core, consisting mainly of calcium phosphates. Additionally, due to the versatility of the sol–gel process, this core was coated with additional phases, constituted by silicon and magnesium, obtaining multilayer scaffolds. The scaffolds were physically and chemically characterized and the in vitro bioactivity was evaluated by immersion in simulated body fluid. The results of in vitro bioactivity showed that the core revealed a lamellar microstructure with some apatite precipitates after 14 days, while the multilayer scaffolds presented precipitates over the whole surface in only 3 days. The accelerated bioactivity and the general properties of the multiphase and multilayer scaffolds show the potential of this material in the area of tissue engineering.

In this study, porous carbon has been prepared through potassium hydroxide (KOH) activation of coconut fiber (CF) and subsequent carbonization in the presence of an inert gas. The activated carbons (AC) were prepared via carbonization of the precursor at different temperatures. Subsequently, their electromagnetic wave absorption (EMWA) performance was investigated at X-band frequency. The phase crystallinity, porous features, and degree of graphitization of the activated carbons were studied using XRD, nitrogen adsorption/desorption isotherm, and Raman spectroscopy, respectively. Using the BET method, the activated carbon prepared at 750 °C displayed a high specific surface area of 602.9 m2 g−1 and an average pore size of 6 nm, which confirms the extant of mesopores. The EMWA was studied using COMSOL Multiphysics software based on the finite element method. Results show that the activated carbon prepared at 750 °C attained an optimal reflection loss of −45.6 dB at 10.96 GHz with a corresponding effective bandwidth of 3.5 GHz at a thickness of 3.0 mm. In conclusion, this study interestingly shows that porous carbon obtained from coconut fiber has great potential for attenuating electromagnetic waves.

In this work, a fused-ring tetrazolo[4,3-b]pyridazine framework with catenated nitrogen chain was applied to develop new energetic materials with task-specific applications for different purposes. Their syntheses, characterizations and properties were extensively studied. Among them,6-methylnitramimo-7-nitro-8-aminotetrazolo[1,5-b]pyridazine (4) is a potential booster explosive with good detonation velocities (Dv: 8496 m s−1), detonation pressure (P: 28.7 GPa), impact sensitivity (IS: 3 J), friction sensitivity (FS: 112 N) and better decomposition temperature (Td: 200.7 °C) than PETN as well as suitable predicted shock sensitivity (P90% TMD: 1.839 GPa). 6-Nitramimo-7-amino-8-nitrotetrazolo[1,5-b]pyridazine (12) is a high-energy explosive (Dv: 8926 m s−1, P: 33.7 GPa), while bis((7-nitro-8-aminotetrazolo[1,5-b]pyridazin-6-yl)amino)ethane (9) is a heat-resistant explosive (Td: 303.1 °C) with high detonation performances (Dv: 8809 m s−1, P: 29.3 GPa) and low sensitivities (IS: 19 J, FS: 288 N). The analysis of crystal structure, Hirshfeld surface, fingerprint plot, bond dissociation energies (BDEs) and electrostatic potentials (ESP) was used to assess the energy density and sensitivity properties.

In this study, walnut shell bio-oil was separated into aqueous phase and oil phase, which were subjected to atmospheric distillation, accompanied by changes of heating temperature and heat preservation time. The fractionation behaviors of various components were investigated by analyzing the distillate collected independently at each temperature in stages. In distillation experiments on oil phase bio-oil (OPB), phenols fractionated in large quantities in the temperature range of 280-320 °C were the main component of oil phase fraction, of which the overwhelming majority were phenol as well as its congeners and guaiacol as well as its congeners. Changing the temperature program had a significant effect on the separation of these two compounds, and the relative concentrations of both were increased by 468 wt. % and 139 wt. %, respectively, when comparing OPB. Experimental data on the distillation of aqueous phase bio-oil (APB) revealed that the fractions were enriched with compounds such as acetic acid and guaiacol in a directional manner, whereas the large amount of water distillation and heating temperature higher than 140°C were two necessary conditions for the coking of aqueous phase bio-oil. Summary of distillation behaviors for various high-value compounds provides guidance for process design and scale-up utilization.

Derivatization of 2D materials for bioapplications is at the forefront of nanomaterials research nowadays. Facile synthesis of the biografted 2D derivatives and insight into the conformation of the conjugated biomolecules are two pillars, promoting advances in the field of biosensing, drug delivery and regeneration techniques. This work is devoted to the synthesis and conjugation of carboxylated graphene by aptamers followed by theoretical analysis of their conformation in the immobilized state. Employing the developed method, the hole-matrixed graphene with up to 11.1 at.% reactive carboxyl groups was synthesized and thoroughly examined via core-level spectroscopy and time-resolved methods. The mechanism of the performed carboxylation with conversion of graphene oxide into carboxylated graphene is proposed, unveiling commonly disregarded impact of ether-like components to the fingerprints of the carboxyl groups. We show successful covalent immobilization of the AO-01 aptamer against Hepatitis B protein on the synthesized C-xy graphene and for the first time reveal its conformation both in free and immobilized forms via a combination of density functional theory (DFT) calculations and molecular dynamic (MD) modeling. Taken together, these results advance the application of graphene derivatives grafted with the biomolecules in the field of biosensing.

Halbach arrays are the most efficient closed structures for generating directed magnetic fields and gradients, and are widely used in various electric machines. We utilized fused deposition modelin...

Additive manufacturing of fiber-reinforced polymers is one of the latest technical developments in composites manufacturing. However, there is a severe shortage of research into continuous fiber-re...

The kinetics of the thermally induced glass / crystal phase transformation of chalcogenide glasses plays an important role in determining their candidacy for optical phase change memory applications. The rate of crystallization and the corresponding activation energy are the two crucial kinetic parameters that reflect the durability and quality (i.e., storage properties) of phase change materials. This script deals with metal-induced effects on thermally regulated non-isothermal crystallization in a new glass alloy of Se-Te-Sn using calorimetric measurements. The elements Antimony (Sb), Cadmium (Cd) and Indium (In) have been used as structural modifiers for this purpose. The crystallization and glass transition kinetics of these glass alloys have been investigated by thermal analysis of several kinetic parameters such as the parameter of order n, the maximum crystallization temperature Tc, the crystallization rate K and the consequent activation energy Ec). A DSC is used in non-isothermal mode for the present studies. The values of the activation energy Ec are determined using the data obtained from the displacement of the exothermic peaks of crystallization in non-isothermal DSC plots at various heating rates. The role of the additives Sb, Cd and In in the variation in the rate of crystallization K of and the Avrami index (n) for each glass alloy is also examined. Detailed thermal analysis of the kinetic data confirms the superiority of Cd over the other two additives (In and Sb) for optimization of the kinetic properties of the main SeTeSn glass.

Within the food sector, the implementation of a circular economy (CE) can reduce resource consumption and emissions to the environment by moving away from a linear and unsustainable system. This necessitates a clear vision on what circularity for food means, which will provide a much-needed foundation to develop a mon-itoring tool that reveals insights into the progress being made towards a CE, and to expose the bottlenecks and opportunities. This research study contributes to the development of a shared vision for circularity within the food system, and defines and prioritizes a set of indicator themes to monitor a circular food economy (CFE). A two-round Delphi study was performed, including a brainstorming session with experts and the construction of a consensus ranking of indicator themes, considering the production and processing and the consumption stage. The Delphi results provide a shared vision on a CFE, and a blueprint for researchers and policy-makers on its monitoring, which will stimulate the progression from a linear to a circular system.(c) 2022 Published by Elsevier Ltd on behalf of Institution of Chemical Engineers.

Chitosan-coated Fe3O4 nanoparticles were prepared by coprecipitation followed by reaction with chitosan and different volumes of glutaraldehyde. Coating was modified by varying the volume of glutaraldehyde and reaction time. XRD pattern shows maxima compatible Fe3O4 structure. FTIR spectroscopia confirms the presence of chitosan, more evident in samples with higher chitosan content, as denoted by TGA. TEM images of samples with low glutaraldehyde content reveal particles coated with a homogeneous chitosan shell. Meanwhile, those prepared with high glutaraldehyde volume show nanoparticles dispersed in an organic matrix. Samples present almost superparamagnetic behavior with magnetization saturation values that are reduced as the content of organic matter increases. Regarding the stability of these samples in solution, the presence of a homogeneous coating improves the initial suspension, although it does not prevent its subsequent aggregation over time. However, this aggregation process is reduced for sample synthesized with 1 mL of glutaraldehyde after 6 h of reaction.

Ruthner powder is a by-product of the steel hot-rolling process. This study introduces a new application area for this waste material by investigating its activity for the oxygen evolution reaction. Ruthner powder with the α-Fe2O3 phase structure was deposited on the carbon paper substrates using the electrophoretic deposition (EPD) process to fabricate the electrodes. The effect of the concentration of cetrimonium bromide ([CTAB]) and the Ruthner powder ([RP]) in the EPD cell on the morphology and activity of the electrodes were investigated by SEM, LSV, and EIS techniques. The results revealed the formation of a homogenous layer on the carbon paper when [CTAB] and [RP] were respectively 0.4 g.l−1 and 0.2 g.l−1. The obtained electrode showed the best activity among all fabricated electrodes. In particular, its onset overpotential and overpotential at a current density of 10 mA.cm−2 were respectively 85% and 25% lower than those of bare carbon electrodes.

In this study, it was investigated the coating of cotton fabric with huntite-hydromagnesite (HH) or ammonium polyphosphate (APP) solutions as anionic layer and chitosan solutions and nanosols as cationic layer by layer-by-layer (LBL) assembly to gain flame retardancy and antibacterial properties. Growth bilayer number, drying conditions and anionic layer type (HH or APP) affected the flame retardancy and antibacterial properties of coating with LBL assembly. 17% and 22% reduction in the peak heat release rate and 69% and 87% reduction in total smoke release and 26% and 14% reduction in mass loss rate were observed for fabric samples coated with AP solutions for 15 layers with drying after every dipping process (AP15DE) and fabric samples coated with HH solutions for 15 layers with drying after every dipping process,(H15DE) respectively. Thermogravimetric analysis revealed that the residual chars at 600 oC in air increased. The AP15DE exhibited the antibacterial activity against E. coli and S. aureus while H15DE displayed the antibacterial activity against only S. aureus.

Introduction: Rice husk nanosilica has a porous, amorphous structure with a surface containing silica (SiO2). Silica interacts with calcium ions to form hydroxyapatite and can induce the formation of reactive oxygen species (ROS), which harm microorganisms. Aims: To determine the effect of rice husk nanosilica on the increase in dentin hydroxyapatite and its antimicrobial effects against S. Mutans. Methods: Nine dental cavity samples were divided into 3 groups: group 1, normal dentin; group 2, demineralised dentin and group 3, demineralised dentin treated with rice husk nanosilica. The samples were analysed using XRD to evaluate the formation of dentin hydroxyapatite, and the results were statistically evaluated using the Kruskal-Wallis test. An antimicrobial test was conducted using an MTT assay to analyse the viability of S. mutans after exposure to 2% nanosilica rice husk, and the results were statistically evaluated using a t-test. Results: There was an increase in the amount of dentin hydroxyapatite after the application of rice husk nanosilica compared with the control group (normal dentin), and 2% rice husk nanosilica had an antimicrobial effect (p

Mineral carbonation of construction and demolition waste is a viable alternative for the reduction of CO2 emissions from industry. Concrete and cement, together with ceramic blocks, are the primary sources of calcium for mineral carbonation in which CO2 is fixed in a stable and inert process. One type of concrete was selected from 5 for the carbonation tests. Crushed, separated into size fractions, moistened to 20% and tested at 10 bars of CO2 for 24 to 720 h. Destruction of portlandite and ettringite phases was determined. Calcite precipitated as carbonate phase. Maximum carbonation was reached after 72 h, fixing 6.5% of CO2.

This paper presents a comparison between the performances of two chemistries of synthetic oil lubricants, polyalphaolefins (PAOs) and perfluoropolyethers (PFPEs) when applied on gold-plated electrical contacts operating at contact loads of 9.8 cN and experiencing fretting-induced degradation. Performance assessment was done using the contact resistance and coefficient of friction behavior and the surface’s response to fretting in the presence of different types of lubricants within the two chemistries. It was found that the PAOs improved the fretting performance of the lightly loaded contacts, and statistically, were at least fifty times more reliable for a longer duration of fretting cycles than the PFPEs, suggesting their suitability for low contact load applications. At low loads, PFPEs underwent contact separation due to hydrodynamic lubrication, and the behavior was more observable among the PFPEs having higher kinematic viscosities. On the contrary, viscous PAOs had improved fretting performance and delayed time to contact failure than less viscous PAOs. The applied lubricant film thickness also contributed to the contact’s performance, and it was found that increasing the thickness of the PFPE films advanced contact failures, while the PAO film postponed contact’s time to failure.

Innovative scaffold designs that modulate the local inflammatory microenvironment through favorable macrophage polarization and suppressing oxidative stress are needed for successful clinical translation of regenerative cell therapies and graft integration. We herein report derivation of a hydrazone-crosslinked gallol functionalized hyaluronic acid (HA-GA)-based hydrogel that displayed outstanding viscoelastic properties and immunomodulatory characteristics. Grafting of 6% gallol (GA) to a HA-backbone formed an interpenetrative network by promoting an additional crosslink between the gallol groups in addition to hydrazone crosslinking. This significantly enhanced the mechanical stability and displayed shear-thinning/self-healing characteristics, facilitated tissue adhesive properties to porcine tissue and also displayed radical scavenging properties, protecting encapsulated fibroblasts from peroxide challenge. The THP-1 human macrophage cell line or primary bone-marrow-derived murine macrophages cultured within HA-GA gels displayed selective polarization to a predominantly anti-inflammatory phenotype by upregulating IL4ra, IL-10, TGF-β, and TGF-βR1 expression when compared with HA-HA gels. Conversely, culturing of pro-inflammatory activated primary murine macrophages in HA-GA gels resulted in a significant reduction of pro-inflammatory TNF-α, IL-1β, SOCS3 and IL-6 marker expression, and upregulated expression of anti-inflammatory cytokines including TGF-β. Finally, when the gels were implanted subcutaneously into healthy mice, we observed infiltration of pro-inflammatory myeloid cells in HA-HA gels, while immunosuppressive phenotypes were observed within the HA-GA gels. Taken together these data suggest that HA-GA gels are an ideal injectable scaffold for viable immunotherapeutic interventions. Statement of significance Host immune response against the implanted scaffolds that are designed to deliver stem cells or therapeutic proteins in vivo significantly limits the functional outcome. For this reason, we have designed immunomodulatory injectable scaffolds that can favorably polarize the recruited macrophages and impart antioxidant properties to suppress oxidative stress. Specifically, we have tailored a hyaluronic acid-based extracellular matrix mimetic injectable scaffold that is grafted with immunomodulatory gallol moiety. Gallol functionalization of hydrogel not only enhanced the mechanical properties of the scaffold by forming an interpenetrating network but also induced antioxidant properties, tissue adhesive properties, and polarized primary murine macrophages to immunosuppressive phenotype. We believe such immunoresponsive implants will pave the way for developing the next-generation of biomaterials for regenerative medicine applications. De två första författarna delar förstaförfattarskapet

Hydrogen production has been advocated as a promising way for the decarbonization of power systems with renewables. By using the renewable curtailments to produce the hydrogen gas that will be used for power supply when necessary, water electrolysis can work with transmission expansion planning (TEP) to improve the renewable utilization. In this paper, it is found that the nonlinear electrochemical characteristics of water electrolysis can be equivalently formulated as the feasible region that consists of two convex subregions, in the space of the consumed renewable power and produced hydrogen gas. Regarding this finding and the typical application scenario where the hydrogen gas is stored in gasholders and used in hydrogen oxygen fuel cells, TEP with water electrolysis is further established as a mixed integer nonlinear programing (MINLP) problem. In our formulation, two linear relaxation technologies are presented to handle both the complementary constraints of the gasholders and the selection of which subregion of water electrolysis. Numerical results in the Garver 6-bus test system and a 661-bus utility system demonstrate the effectiveness of the presented methods.