Search

Chitosan (CH) is a biopolymer derived from chitin, which is the second most abundant polysaccharide in nature, after cellulose. Their functional groups -NH(2) and -OH can form intermolecular interactions with water and other molecules, enabling a variety of applications for CH. -NH(2) groups become protonated in acidic solutions, causing an increase in electrostatic repulsion between CH chains, which facilitates their dispersion in aqueous media. Aqueous solutions of acetic acid and/or acetates buffers have been used to disperse CH, but may not be adequate for technological applications, espeacially because of the strong flavor this acid confers to formulations. In this study, 0.125; 0.250; 0.500; 0.750 and 1.000 g (100 g)(−1) CH dispersions were prepared in acidic aqueous media (50 mmol L(−1)), not only with acetic (AA), but also with glycolic (GA), propionic (PA), or lactic (LA), acid aiming to evaluate the effects of biopolymer concentration and type of organic acid on: electrical conductivity, pH, density and rheological characteristics of dispersions. Moreover, ζ potential values of CH chains dispersed in these acidic aqueous media were assessed. pH, density and consistency index were influenced by the biopolymer concentration, but not by the acid type. At a given biopolymer concentration, ζ potential signs (+) and values suggested that electrostatic interactions between CH chains and counter-anions occurred, regardless of the type of the organic acid. Thus, at least from a physicochemical point of view, GA, PA or LA showed to be suitable to replace AA when preparing dispersions containing from 0.125 to 1.000 g (100 g)(−1) CH for technological purposes, such as thickening or stabilizer in formulated food products. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s13197-020-04691-0) contains supplementary material, which is available to authorized users.

Casein-based hydrogels are biocompatible, biodegradable, renewable, easy to obtain, inexpensive, and non-toxic. They exist in different physicochemical states, e.g. particle hydrogels, which can be dived in suspensions or emulsions and macro hydrogels that are gel colloid type. These biomaterials have drawn increasing attention in recent years due to their abilities to form networks of different tensile strengths and to encapsulate, protect and release biomolecules. This mini-review outlines the recent advances in casein-based hydrogel research and the uses of casein-based hydrogels as drug delivery system for both hydrophobic and hydrophilic molecules. The food and biomedical potential along with possible future uses of the casein-based hydrogels are discussed throughout the document.

Biopolymers mixtures appear as a strategy to improve sensorial/technological characteristics of gel-like products. Thus, self-sustaining starch (S100/C0) hydrogels were prepared with a partial replacement of the gelling agent by 5.0 % (S95/C5), 7.5 % (S92.5/C7.5), or 10.0 % chitosan (S90/C10), and containing yellow sunset (INS 110). Major visual changes or significant differences on L*a*b* parameters were not observed for starch/chitosan hydrogels. Creep-recovery data was modeled using the simulated annealing algorithm, and relative recovery results showed an increase for S95/C5 (82.6 %), when compared to S100/C0 (72.9 %). After 312 h, chitosan strongly reduced the INS 110 release from hydrogels to an ethanolic solution (3.1∙10−4 and 4.1∙10-3 g/100 mL for S95/C5 and S100/C0, respectively) or to a sucrose solution (1.1∙10-3 and 6.5∙10-3 g/100 mL for S95/C5 and S100/C0, respectively). Such results highlighted that chitosan not only presented a techno-functionality on starch hydrogels by improving their elasticity but also by hindering the release of yellow sunset.

The bacteriophage UFV-AREG1 was used as a model organism to evaluate the encapsulation via extrusion using different hydrocolloids. Pure alginate [0.75%, 1.0%, 1.5% and 2.0% (m/v)] and mixtures of alginate [0.75% or 1.0% (m/v)] with carrageenan [1.25% (m/v)], chitosan [0.5% (m/v)], or whey protein [1.5% (m/v)] were used to produce bacteriophage-loaded beads. The encapsulating solutions presented flow behavior of non-Newtonian pseudoplastic fluids and the concentration of hydrocolloid did not influence (p > 0.05) the morphology of the beads, except for alginate-chitosan solutions, which presented the higher flow consistency index (K) and the lower flow behavior index (n). The encapsulation efficiency was about 99% and the confocal photomicrography of the encapsulated bacteriophages labeled with fluorescein isothiocyanate showed homogenous distribution of the viral particles within the beads. The phages remained viable in the beads of alginate-whey protein even when submitted to pH 2.5 for 2 h. Beads incubated directly in simulated intestinal fluid (pH 6.8) resulted in a minimal of 50% release of the UFV-AREG1 phages after 5 min, even when previously submitted to the simulated gastric fluid (pH 2.5). Encapsulation enabled phages to remain viable under refrigeration for five months. Encapsulated UFV-AREG1 phages were sensitive to dehydration, suggesting the need for protective agents. In this study, for the first-time bacteriophages were encapsulated in alginate-carrageenan beads, as well as alginate-chitosan as a bead-forming hydrocolloid. In addition, a novel procedure for encapsulating bacteriophages in alginate-whey protein was proposed. The assembled system showed efficiency in the encapsulation of UFV-AREG1 bacteriophages using different hydrocolloids and has potential to be used for the entrapment of a variety of bioactive compounds.

Chitosan is a polysaccharide well-known for its applicability as a biocompatible, biodegradable, and non-toxic material to produce drugs excipients and food coatings. Acidic media are required to disperse chitosan, and aqueous solutions of acetic acid have been typically used for this purpose. However, this acid has several sensory drawbacks. In this study, chitosan was dispersed [0.1 g·(100 mL)−1] in aqueous media containing acetic (AA), glycolic (GA), propionic (PA), or lactic (LA) acid, at 10, 20, 30, 40, or 50 mmol·L−1. The increase of acid concentration reduced pH and viscosity of the dispersions, and |ζ potential| of dispersed particles. Conversely, it increased electrical conductivity and density of the dispersions, and hydrodynamic diameter of dispersed particles. At a given concentration, these effects were slightly more pronounced for dispersions formed with GA or LA, compared to AA or PA. FT-IR data suggested more intense attractive interactions of chitosan chains with glycolate and lactate anions, than with acetate and propionate. Chitosan chains interacted more strongly with hydroxylated acids counter-anions than with their non-hydroxylated counterparts, leading to slight quantitative changes of physicochemical properties of these systems. Then, in physicochemical terms, GA, LA or PA are suitable to replace AA when preparing aqueous chitosan dispersions for technological applications.

Herein, we used an electrospinning process to develop highly efficacious and hydrophobic coaxial nanofibers based on poly-cyclodextrin (polyCD) associated with poly(methacrylic acid) (PMAA) that combines polymeric and supramolecular features for modulating the release of the hydrophilic drug, propranolol hydrochloride (PROP). For this purpose, polyCD was synthesized and characterized, and its biocompatibility was assessed using fibroblast cytotoxicity tests. Moreover, the interactions between the guest PROP molecule and both polyCD and $\beta$CD were found to be spontaneous. Subsequently, PROP was encapsulated in uniaxial and coaxial polyCD/ PMAA nanofibers. A lower PROP burst effect (reduction of approximately 50%) and higher modulation were observed from the coaxial than from the uniaxial fibers. Thus, the coaxial nanofibers could potentially be a useful strategy for developing a controlled release system for hydrophilic molecules., Comment: 10 pages, 8 figures + Supplementary Data (4 pages, 6 figures)

Chitosan is a natural polycationic polysaccharide with several known biotechnological functionalities, but its application in food products as ingredient or additive remains nowadays unusual. Additionally, ultrasonic production of food-grade emulsions is still an open research field, so ultrasound applicability for such purpose must be evaluated case by case. In this study, chitosan was dispersed in acid aqueous media containing acetic, glycolic, propionic or lactic acid (50 mmol·L−1), then added of the emulsifier Tween 20, and finally mixed to sunflower oil, through ultrasonic homogenization (20 kHz, 500 W, 4 min), in order to prepare O/W emulsions (oil fraction = 0.25). In all studied systems, oil droplets with average hydrodynamic diameter

Cyclodextrins and cyclodextrins-modified molecules have interesting and appealing properties due to their capacity to host components that are normally insoluble or poorly soluble in water. In this work, we investigate the interaction of a β-cyclodextrin polymer (poly-β-CD) with λ-DNA. The polymers are obtained by the reaction of β-CD with epichlorohydrin in alkaline conditions. We have used optical tweezers to characterize the changes of the mechanical properties of DNA molecules by increasing the concentration of poly-β-CD in the sample. The physical chemistry of the interaction is then deduced from these measurements by using a recently developed quenched-disorder statistical model. It is shown that the contour length of the DNA does not change in the whole range of poly-β-CD concentration (

Bovine α-lactalbumin (α-La) and lysozyme (Lys), two globular proteins with highly homologous tertiary structures and opposite isoelectric points, were used to produce bio-based supramolecular structures under various pH values (3, 7 and 11), temperatures (25, 50 and 75 °C) and times (15, 25 and 35 min) of heating. Isothermal titration calorimetry experiments showed protein interactions and demonstrated that structures were obtained from the mixture of α-La/Lys in molar ratio of 0.546. Structures were characterized in terms of morphology by transmission electron microscopy (TEM) and dynamic light scattering (DLS), conformational structure by circular dichroism and intrinsic fluorescence spectroscopy and stability by DLS. Results have shown that protein conformational structure and intermolecular interactions are controlled by the physicochemical conditions applied. The increase of heating temperature led to a significant decrease in size and polydispersity (PDI) of α-La–Lys supramolecular structures, while the increase of heating time, particularly at temperatures above 50 °C, promoted a significant increase in size and PDI. At pH 7 supramolecular structures were obtained at microscale – confirmed by optical microscopy – displaying also a high PDI (i.e. > 0.4). The minimum size and PDI (61 ± 2.3 nm and 0.14 ± 0.03, respectively) were produced at pH 11 for a heating treatment of 75 °C for 15 min, thus suggesting that these conditions could be considered as critical for supramolecular structure formation. Its size and morphology were confirmed by TEM showing a well-defined spherical form. Structures at these conditions showed to be stable at least for 30 or 90 days, when stored at 25 or 4 °C, respectively. Hence, α-La–Lys supramolecular structures showed properties that indicate that they are a promising delivery system for food and pharmaceutical applications., CNPq and CAPES, and their support to FAPEMIG and CNPEM-LNBio (Centro Nacional de Pesquisa em Energia e Materiais-Laboratório Nacional de Biociências) both from Brazil. Fundação para a Ciência e a Tecnologia. The authors thank the FCT Strategic Project of UID/BIO/04469/2013 unit, COMPETE 2020 (POCI-01-0145-FEDER-006684), the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462), and the project “BioInd - Biotechnology and Bioengineering for improved Industrial and Agro-Food processes”, REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER.