Search

Background: The incidence of cerebral ischemia disease leading cause of death in human population worldwide. Treatment of cerebral ischemia remains a clinical challenge for researchers and mechanisms of cerebral ischemia remain unknown. During the cerebral ischemia, inflammatory reaction and oxidative stress plays an important role. The current investigation scrutinized the neuroprotective and anti-inflammatory role of pterostilbene against cerebral ischemia in middle cerebral artery occlusion (MCAO) rodent model and explore the underlying mechanism.Methods: The rats were divided into following groups viz., normal, sham, MCAO and MCAO + pterostilbene (25 mg/kg) group, respectively. The groups received the oral administration of pterostilbene for 30 days followed by MCAO induction. The neurological score, brain water content, infarct volume and Evan blue leakage were estimated. Hepatic, renal, heart, inflammatory cytokines and inflammatory mediators were estimated.Results: Pterostilbene treatment significantly (p < 0.001) improved the body weight and suppressed the glucose level and brain weight. Pterostilbene significantly (p < 0.001) reduced the hepatic, renal and heart parameters. Pterostilbene significantly (p < 0.001) decreased the level of glutathione (GSH), glutathione peroxidase (GPx), superoxide dismutase (SOD) and decreased the level of malonaldehyde (MDA), 8-Hydroxy-2′-deoxyguanosine (8-OHdG). Pterostilbene significantly (p < 0.001) inflammatory cytokines and inflammatory parameters such as cyclooxygenase-2 (COX-2), inducible nitric oxidase synthase (iNOS) and prostaglandin (PGE2). Pterostilbene significantly (p < 0.001) down-regulated the level of metalloproteinases (MMP) such as MMP-2 and MMP-9. Pterostilbene suppressed the cellular swelling, cellular disintegration, macrophage infiltration, monocyte infiltration and polymorphonuclear leucocyte degranulation in the brain.Conclusion: In conclusion, Pterostilbene exhibited the neuroprotective effect against cerebral ischemia in rats via anti-inflammatory mechanism.

Ammonia is a widely produced chemical that is the basis of most fertilisers. However, it is currently derived from fossil fuels and there is an urgent need to develop sustainable approaches to its production. Ammonia is also being considered as a renewable energy carrier, allowing efficient storage and transportation of renewables. For these reasons, the electrochemical nitrogen reduction reaction (NRR) is currently being intensely investigated as the basis for future mass production of ammonia from renewables. This Perspective critiques current steps and miss-steps towards this important goal in terms of experimental methodology and catalyst selection, proposing a protocol for rigorous experimentation. We discuss the issue of catalyst selectivity and the approaches to promoting the NRR over H2 production. Finally, we translate these mechanistic discussions, and the key metrics being pursued in the field, into the bigger picture of ammonia production by other sustainable processes, discussing benchmarks by which NRR progress can be assessed. The electrochemical reduction of nitrogen is being intensely investigated as the basis for future ammonia production. This Perspective critiques current steps and missteps towards this goal in terms of experimental methodology and catalyst selection, proposing a protocol for rigorous experimentation.

The electrochemical N2 reduction reaction (NRR) offers a direct pathway to produce NH3 from renewable energy. However, aqueous NRR suffers from both low Faradaic efficiency (FE) and low yield rate. The main reason is the more favored H+ reduction to H2 in aqueous electrolytes. Here we demonstrate a highly selective Ru/MoS2 NRR catalyst on which the MoS2 polymorphs can be controlled to suppress H+ reduction. A NRR FE as high as 17.6% and NH3 yield rate of 1.14 × 10–10 mol cm–2 s–1 are demonstrated at 50 °C. Theoretical evidence supports a hypothesis that the high NRR activity originates from the synergistic interplay between the Ru clusters as N2 binding sites and nearby isolated S-vacancies on the 2H-MoS2 as centers for hydrogenation; this supports formation of NH3 at the Ru/2H-MoS2 interface.

Chemiluminescence (CL) reactions usually take place in a severely restricted pH regime, thereby confining their application in media at different pH. In this paper, the CL behavior of tobacco-methanol extract (TME) was explored. Surprisingly, TME exhibited CL behavior upon mixing with Fe2+/H2O2, HRP/H2O2 and gold nanoparticles/H2O2 oxidation systems, i.e., in acidic, neutral and alkaline solution respectively. Addition of different reactive oxygen species scavengers verified that the hydroxyl radical ( OH) triggers TME CL reactions. Then, the CL behavior of TME was applied to determine OH in tetrachloro-1,4-benzoquinone (TCBQ)/H2O2 system in acidic, neutral and alkaline solutions. CL intensity correlated most strongly (R2 = 0.99) with TCBQ concentration, which was used as a means to indirectly denote OH concentration. This implies that OH could be determined by a TME CL method in a semi-quantitative way regardless of pH value. Therefore, the TME CL method may be a promising method for OH determination in various OH-generating systems.

Quinclorac is a specific auxin herbicide with chloro-quinolinecarboxylic acid structure and has been widely recognized as the preferred option for controlling both broadleaf weed and barnyard grass. However, the extensive application of quinclorac has resulted in the evolution of resistant plants, the frequent detection in the environment, and the hazard to non-target organisms. Consequently, the aim of this review is to comprehensively summarize the recent investigations on quinclorac, so as to help promoting the further study for reasonably employing quinclorac and effectively controlling the related risks. In this review, the action mechanism of quinclorac was discussed based on the structure and property, suggesting the involvements of ethylene, phytohormone and even cyanide in sensitive plants. The evolved resistance might be related to auxin production, gene expression, translocation and metabolism. By establishing the reliable methods in previous studies, the quinclorac residue was widely detected and could cause the obvious toxicity such as physiological changes and oxidative stress. Nevertheless, there is still a lack of the remediation technique, which can be efficiently applied in practical engineering.

Renewable energy-driven ammonia electrosynthesis by N2 reduction reaction (NRR) at ambient conditions is vital for sustainability of both the global population and energy demand. However, NRR under ambient conditions to date has been plagued with a low yield rate and selectivity (

Heterogeneous catalytic reactions usually proceed at the surfaces of materials, where many intermediates, such as free radicals, usually were believed to be short-lived. Herein, surface long-lived superoxide radicals (O2˙−) were identified in UV-irradiated aqueous suspensions of TiO2 and other metal oxide nanoparticles using an online chemiluminescence system. From the decay dynamics process of O2˙−, a long-lived O2˙− radical was observed on anatase TiO2 at pH = 12. After separation of the photo-excited suspension via filtration, CL was detected from the particles but not the filtrate, thus confirming O2˙− surface adsorption. The unusual stability of O2˙− was also verified using density functional theory (DFT) calculations. The lifetimes of the radicals were estimated on the different kinds of semiconductor surface according to the decay dynamics curves, and followed the order: TiO2 > ZnO > SnO2 > CeO2 > Fe2O3. Furthermore, the function of surface long-lived O2˙− in TiO2 suspensions with regards to photochemical conversion was investigated using NBT as a chemical model; it was found that half of the molecules were reduced by the surface-adsorbed O2˙−. The finding of surface-stabilized, long-lived superoxide radicals may have important implications in relation to the chemistry, biology and toxicology of these radicals.

Sodium-ion batteries (SIBs) are widely considered as alternative, sustainable, and cost-effective energy storage devices for large-scale energy storage applications. In this work, an easily fabricated sodium vanadium phosphate-carbon composite (NVP@C) cathode material shows a good rate capability, and long cycle life (89% capacity retention after 5000 cycles at a rate of 10C) with an ionic liquid electrolyte for room temperature sodium metal batteries. The electrochemical performance of a full-cell sodium ion battery with NVP@C and hard carbon electrodes was also investigated at room temperature with an ionic liquid electrolyte. The battery exhibited 368 W h kg(-1) energy density and 75% capacity retention after 100 cycles, outperforming the organic electrolyte-based devices.

The inhibitory effect of matrine (MA) was studied in combination with irinotecan (CPT-11) on proliferation of human colon carcinoma cell line HT29. We also explored the mechanism of cell apoptosis induction in HT29. HT29 cells were treated with different concentrations of MA and CPT-11 alone and in combination. The growth inhibition in HT29 cells was evaluated using MTT assay. Apoptosis was detected using AV-PI double staining flow cytometry. Transmission electron microscopy was used to detect structural changes in cells. Topoisomerase (TOPO) I, Bax and Caspase-3 expression levels were evaluated using western blot analysis. MA and CPT-11 alone and in combination, inhibited the proliferation of HT29 cells, whereas the combination treatment exhibited higher inhibitory effect (P

For the characterization of chemical components contributing to the aroma of ginger, which could benefit the development of deep-processed ginger products, volatile extracts were isolated by a combination of direct solvent extraction-solvent-assisted flavor evaporation and static headspace analysis. Aroma-impact components were identified by gas chromatography-olfactometry-mass spectrometry, and the most potent odorants were further screened by aroma extract dilution analysis (AEDA) and static headspace dilution analysis (SHDA). The AEDA results revealed that geranial, eucalyptol, β-linalool, and bornyl acetate were the most potent odorants, exhibiting the highest flavor dilution factor (FD factor) of 2187. SHDA indicated that the predominant headspace odorants were α-pinene and eucalyptol. In addition, odorants exhibiting a high FD factor in SHDA were estimated to be potent aroma contributors in AEDA. The predominant odorants were found to be monoterpenes and sesquiterpenes, as along with their oxygenated derivatives, providing minty, lemon-like, herbal, and woody aromas. On the other hand, three highly volatile compounds detected by SHDA were not detected by AEDA, whereas 34 high-polarity, low-volatility compounds were identified only by AEDA, demonstrating the complementary natures of SHDA and AEDA and the necessity of utilizing both techniques to accurately characterize the aroma of ginger.

Imidacloprid is a widely used neonicotinoid insecticide worldwide, and has attracted great concerns due to its potential threat to human and environment. Much effort was thus spent on developing the effective way for removing imidacloprid from water, but might also produce various degradation products with unknown risks. The hypothesis was then proposed that permanganate oxidation was probably the appropriate tool for eliminating imidacloprid and its toxicity through selective oxidation of specific groups. To that end, we studied the kinetics of permanganate/imidacloprid reaction by considering the effects of pH (5.0–9.0), temperature (15–35 °C), ionization strength (0.05–0.20 M), typical anions (Cl−, Br−, I−) and humic acid. Based on the identified products from mass spectrometer, the main reaction pathway was found to be the hydroxylation of C–H bond at imidazole ring, leading to the decreased toxicity evaluated by ECOSAR program. Our results demonstrate that permanganate oxidation should be a very promising technique for controlling imidacloprid contamination by effective detoxification through highly selective partial oxidation. Moreover, this study has also paved the way toward applying permanganate oxidation for in situ chemical remediation of imidacloprid, though the corresponding standards need to be established in advance.

Photocatalytic degradation is a powerful technique for the decomposition of pollutants. However, toxic intermediates might be generated which have become a great concern recently. In the present work, a continuous flow chemiluminescence (CFCL) method was developed for dynamic monitoring of toxic intermediates generated in the photocatalytic degradation of pentachlorophenol (PCP). Among the main intermediates, tetrachloro-1,4-benzoquinone (TCBQ) and trichlorohydroxy-1,4-benzoquinone (OH-TrCBQ) showed higher or similar toxicity to PCP. As both TCBQ and OH-TrCBQ can produce chemiluminescence (CL) in the presence of H2O2, a CFCL system was established for the dynamic tracking of the two toxic intermediates. A PCP/TiO2 suspension was irradiated in a photoreactor, pumped continuously into a detection cell, and mixed with H2O2 to produce CL. The time-dependent CL response displayed two distinctive peaks at pH 7, which were attributed to the generation of OH-TrCBQ and TCBQ, respectively, by comparing with their c...

Corncob-derived activated carbon (CAC) was prepared by potassium hydroxide activation. The Pt/Pd-doped CAC samples were prepared by two-step reduction method (ethylene glycol reduction plus hydrogen reduction). The as-obtained samples were characterized by N 2 -sorption, TEM and XRD. The results show the texture of CAC is varied after doping Pt/Pd. The Pd particles are easier to grow up than Pt particles on the surface of activated carbon. For containing Pt samples, the pore size distributions are different from original sample and Pd loaded sample. The hydrogen uptake results show excess hydrogen uptake capacity on the Pt/Pd-doped CAC samples are higher than pure CAC at 298 K, which should be attributed to hydrogen spillover effects. The 2.5%Pt and 2.5%Pd hybrid doped CAC sample shows the highest hydrogen uptake capacity (1.65 wt%) at 298 K and 180 bar, The particle size and distribution of Pt/Pd catalysts could play a crucial role on hydrogen uptake by spillover. The total hydrogen storage capacity analysis show that total H 2 storage capacities for all samples are similar, and spillover enhanced H 2 uptakes of metal-doped samples could not well support total H 2 storage capacity. The total pore volume of porous materials also is a key factor to affect total hydrogen storage capacity.

An efficient photocatalytic process involves two closely related steps: charge separation and the subsequent surface redox reaction. Herein, a ternary hybrid photocatalytic system was designed and fabricated by anchoring Cu(II) clusters onto a TiO2/reduced graphene oxide (RGO) composite. Microscopic and spectroscopic characterization revealed that both TiO2 nanoparticles and Cu(II) clusters were highly dispersed on a graphene sheet with intimate interfacial contact. Compared with pristine TiO2, the TiO2/RGO/Cu(II) composite yielded an almost 3-fold enhancement in the photodegradation rate toward phenol degradation under UV irradiation. Electron spin resonance (ESR) spectra and electrochemical measurements demonstrated that the improved photocatalytic activity of this ternary system benefitted from the synergetic effect between RGO and Cu(II), which facilitates the interfacial charge transfer and simultaneously achieves in situ generation of H2O2 via two-electron reduction of O2. These results highlight the importance to harmonize the charge separation and surface reaction process in achieving high photocatalytic efficiency for practical application.

Reactive oxygen species (ROS) play very important roles in the photocatalytic reactions of semiconductors. Using a continuous flow chemiluminescence (CFCL) system, we developed three methods for the selective, sensitive, and online detection of O2(• -), •OH, and H2O2 generated during ultraviolet (UV) irradiation of nano-TiO2 suspensions. TiO2 nanoparticles were irradiated in a photoreactor and pumped continuously into a detection cell. To detect O2(• -), luminol was mixed with TiO2 before it entered the detection cell. For the detection of short-lived •OH, phthalhydrazide was added into the photoreactor to capture •OH, and then mixed with H2O2/K5Cu(HIO6)2 to produce chemiluminescence (CL). To detect H2O2, an irradiated TiO2 suspension was kept in darkness for 30 min, and then mixed with luminol/K3Fe(CN)6 to produce CL. The selectivity of each method for a particular ROS was verified by using specific ROS scavengers. For a given ROS, a comparison between CL and conventional method showed good agreement for a series of TiO2 concentrations. The sensitivity of CL method was approximately 3-, 1200-, and 5-fold higher than the conventional method for O2(• -), •OH, and H2O2, respectively. To demonstrate the utility of the methods, ROS in three different types of TiO2 suspensions was detected by CFCL. It was found that photodegradation efficiency of Rhodamine B correlated the best (R(2)0.95) with the amount of photogenerated •OH, implying that •OH was the major oxidant in Rhodamine B photodegradation reaction. CFCL may provide a convenient tool for the studies on the reaction kinetics of ROS-participated decomposition of environmental contaminants.