Search

Objective Bioactive glasses (BAG) form, in contrast to formerly used implant materials, a stable bond with tissues, especially bone, when implanted. Nowadays BAGs are often mixed with a cement/composite that hardens in situ to broaden its applications in dentistry or orthopedics. The bioactivity and biocompatibility of possible BAG candidates for BAG-cement/composite development were evaluated. Methods Two fluoride containing BAGs were tested: a Na + -containing (45S5F), based on the first commercial BAG, and a Na + -free BAG (CF9), with a higher Ca 2+ and PO 4 3− content. BAGs were tested on their bioactivity upon immersion in SBF for 7 days by evaluating the surface changes by FT-IR, SEM, EDS and PO 4 3− and Ca 2+ uptake and/or release from SBF. Moreover, the biocompatibility of the BAGs was investigated with a direct contact cell viability study with HFF cells and a cell adhesion study with MG-63 cells. Results The Na + -free BAG, CF9, showed the highest potential to bioactivate cements because of its high Ca 2+ -release and apatite (Ap) formation, as evidenced by SEM pictures and corresponding EDX patterns. FT-IR confirmed the formation of an Ap layer. Moreover CF9 had a higher biocompatibility than 45S5F. Significance For the bioactivation of GICs/composites in order to enhance bonding and remineralization of surrounding tissues, fluoride containing BAG may have advantages over other BAGs as a more stable fluorapatite can be formed. CF9 may be an excellent candidate therefore.

Biocompatible BPA-PPD polyimide is widely used in the packaging of implantable devices. Plasma activation can improve its interaction with the surrounding tissue upon implantation. The influence of He, air, N2 and Ar plasma activation on polyimide's surface hydrophilicity, roughness, topography, composition and cell-surface interaction was evaluated, along with the influence of hydrophobic recovery on such properties. All plasma activations increased the surface hydrophilicity but neither the roughness nor topography changed. The increase was attributed to the incorporated O- and N-functionalities. 24 h after the activations the surface hydrophilicity decreased while maintaining the functionalities, due to the functionalities’ reorientation/migration towards the bulk of polyimide. Air and N2 activations improved the cell-surface interactions with fibroblasts. These were equally influenced by the surface hydrophilicity and the surface functionalities availability. The hydrophobic recovery lowered the initial cell adhesion but not the cell proliferation, as the hydrophobic recovery was progressively reversed in the culture media.

Varying physico-chemical properties of synthetic hydrogels and introducing additives can induce a cell interactive response of hydrogels. Hydrogels were developed based on acrylate-endcapped urethane-based poly(ethylene glycol) precursors with varying backbone molecular weight (2000–8000 g/mol), in combination with the nanoclay Laponite to explore effects on swelling, mechanical and in vitro biological properties. The combined effect of molecular weight and Laponite concentration enables the development of hybrid materials useful for different biomedical applications. Gel fractions approximating 100% along with tunable swelling (4–11 g/g polymer) and mechanical properties (Young's Modulus 0.1–0.6 MPa) are obtained. All materials are non-cytotoxic and AUPs without Laponite are non cell-interative rendering them suitable for non-adherent biomedical applications. Hydrogels composed of Laponite (0.5 or 1 wt%) and PEG backbone molecular weight of 2000 g/mol promote cell proliferation useful to function as synthetic dermal matrices or scaffolds for tissue engineering applications.

Gellan gum hydrogels functionalized with alkaline phosphatase were enzymatically mineralized with phosphates in mineralization medium containing calcium (Ca) and zinc (Zn) to improve their suitability as biomaterials for bone regeneration. The aims of the study were to endow mineralized hydrogels with antibacterial activity by incorporation of Zn in the inorganic phase, and to investigate the effect of Zn incorporation on the amount and type of mineral formed, the compressive modulus of the mineralized hydrogels and on their ability to support adhesion and growth of MC3T3-E1 osteoblast-like cells. Mineralization medium contained glycerophosphate (0.05 m) and three different molar Ca:Zn ratios, 0.05:0, 0.04:0.01 and 0.025:0.025 (all mol/dm3 ), hereafter referred to as A, B and C, respectively. FTIR, SAED and TEM analysis revealed that incubation for 14 days caused the formation of predominantly amorphous mineral phases in sample groups A, B and C. The presence of Zn in sample groups B and C was associated with a drop in the amount of mineral formed and a smaller mineral deposit morphology, as observed by SEM. ICP-OES revealed that Zn was preferentially incorporated into mineral compared to Ca. Mechanical testing revealed a decrease in compressive modulus in sample group C. Sample groups B and C, but not A, showed antibacterial activity against biofilm-forming, methicillin-resistant Staphylococcus aureus. All sample groups supported cell growth. Zn incorporation increased the viable cell number. The highest values were seen on sample group C. In conclusion, the sample group containing the most Zn, i.e. group C, appears to be the most promising. Copyright © 2015 John Wiley & Sons, Ltd.

Polycaprolactone (PCL) is a biodegradable and biocompatible polyester whose low melting point facilitates production of 3D porous scaffolds with precisely defined dimensions and internal architecture by rapid prototyping techniques. To improve the suitability of such PCL scaffolds for bone regeneration applications, they were coated with inorganic layers of calcium phosphate (CaP) and CaP doped with 0.6% w/v magnesium (CaP+Mg) using pulsed laser deposition (PLD) and characterized in vitro using osteoblast-like Saos-2 cells. Saos-2 cells were able to adhere to all scaffolds. CaP+Mg coatings significantly increased activity of alkaline phosphatase (ALP), an early differentiation marker, after 7 days. However, gene expression of ALP after 7 days was markedly lower on the same scaffolds. These data show the feasibility of coating PCL with CaP layers by PLD and the possibility of influencing osteoblastic differentiation by magnesium doping of the CaP coating.

In vascular tissue engineering, great attention is paid to the immobilization of biomolecules onto synthetic grafts to increase bio- and hemocompatibility-two critical milestones in the field. The surface modification field of poly(ethylene terephthalate) (PET), a well-known vascular-graft material, is matured and oversaturated. Nevertheless, most developed methods are laborious multistep procedures generally accompanied by coating instability or toxicity issues. Herein, a straightforward surface modification procedure is presented engineered to simultaneously promote surface endothelialization and anticoagulation properties via the covalent immobilization of gelatin through a photoactivated azide derivative. A complete physicochemical characterization and biological study including cytotoxicity and endotoxin testing are performed. In addition, biocompatibility toward small (diameter ≤ 6 mm) and/or large caliber (diameter ≥ 6 mm) vessels is assessed by micro- and macrovascular endothelial cell assays. Superior bio- and hemocompatibility properties are seen for the gelatin-covalently modified PET surfaces compared to the conventional surface-modification procedures based on physisorption.

This paper presents an alcohol vapor sensor realized using stretchable optical waveguides doped with commercially available fluorescent dyes. The fabrication technology is based on a cost-efficient replication method, employing polydimethylsiloxane materials mixed with the dye Nile red. Upon introduction of ethanol vapors, the fluorescent emission was found to have a wavelength shift of ~20 nm with a response time of ~10 s. Observing the fluorescence intensity of the shifted emission spectrum in a periodically varying environment inside a gas-sensing setup showed a respective variation with introduction of ethanol vapor. The intensity variation also showed the reversibility of the sensor. The sensing platform is found to hold much promise for further integration and multiplexing.

Hydrogel biomaterials can be easily enriched with bioactive substances such as the mineralization-promoting enzyme alkaline phosphatase (ALP). In this study, poly(vinyl alcohol) (PVA) hydrogels designed for osteochondral regeneration containing incorporated ALP were mineralized with calcium phosphate (CaP) and magnesium phosphate (MgP) by incubation in solutions of 0.1 M calcium or magnesium glycerophosphate (CaGP, MgGP). Hydrogels incubated in water served as controls. More mineral was formed in hydrogels incubated in CaGP than in MgGP. Rheometry revealed that mechanical strength (storage modulus) decreased in the order: CaGP>MgGP>water. Physicochemical charaterization showed that hydrogels incubated in CaGP appeared to be mineralized with apatite and amorphous CaP, while hydrogels incubated in MgGP appeared to be mineralized with plate-like MgP crystals and amorphous MgP. Hydrogels incubated in water were devoid of mineralization. Cell viability testing showed that proliferation on hydrogels incubated in MgGP was comparable to that on non-mineralized samples and superior to that on hydrogels incubated in CaGP. The results prove the principle of enzymatic mineralization of PVA hydrogels with CaP and MgP. Further work may concentrate on in vivo evaluation of the suitability of these mineralized hydrogels for bone or osteochondral regeneration applications.

Mineralization of hydrogels, desirable for bone regeneration applications, may be achieved enzymatically by incorporation of alkaline phosphatase (ALP). ALP-loaded gellan gum (GG) hydrogels were mineralized by incubation in mineralization media containing calcium and/or magnesium glycerophosphate (CaGP, MgGP). Mineralization media with CaGP:MgGP concentrations 0.1:0, 0.075:0.025, 0.05:0.05, 0.025:0.075 and 0:0.1 (all values mol/dm3, denoted A, B, C, D and E, respectively) were compared. Mineral formation was confirmed by IR and Raman, SEM, ICP-OES, XRD, TEM, SAED, TGA and increases in the the mass fraction of the hydrogel not consisting of water. Ca was incorporated into mineral to a greater extent than Mg in samples mineralized in media A–D. Mg content and amorphicity of mineral formed increased in the order A B > C > D, but were significantly higher for samples mineralized in medium E. The attachment and vitality of osteoblastic MC3T3-E1 cells were higher on samples mineralized in media B–E (containing Mg) than in those mineralized in medium A (not containing Mg). All samples underwent degradation and supported the adhesion of RAW 264.7 monocytic cells, and samples mineralized in media A and B supported osteoclast-like cell formation. Copyright © 2014 John Wiley & Sons, Ltd.

Mineralization of hydrogels is desirable prior to applications in bone regeneration. CaCO3 is a widely used bone regeneration material, and Mg, when used as a component of calcium phosphate biomaterials, has promoted bone-forming cell adhesion and proliferation and bone regeneration. In this study, gellan gum hydrogels were mineralized with carbonates containing different amounts of calcium (Ca) and magnesium (Mg) by alternate soaking in, firstly, a calcium and/or magnesium ion solution and, secondly, a carbonate ion solution. This alternate soaking cycle was repeated five times. Five different calcium and/or magnesium ion solutions, containing different molar ratios of Ca to Mg ranging from Mg free to Ca free were compared. Carbonate mineral formed in all sample groups subjected to the alternate soaking cycle. Ca : Mg elemental ratio in the mineral formed was higher than in the respective mineralizing solution. Mineral formed in the absence of Mg was predominantly CaCO3 in the form of a mixture of calcite and vaterite. Increasing the Mg content in the mineral formed led to the formation of magnesian calcite and decreased the total amount of the mineral formed and its crystallinity. Hydrogel mineralization and increasing Mg content in mineral formed did not obviously improve proliferation of MC3T3-E1 osteoblast-like cells or differentiation after 7 days.

In the last decade, substantial research in the field of post-plasma grafting surface modification has focussed on the introduction of carboxylic acids on surfaces by grafting acrylic acid (AAc). In the present work, we report on an alternative approach for biomaterial surface functionalisation. Thin poly-ε-caprolactone (PCL) films were subjected to a dielectric barrier discharge Ar-plasma followed by the grafting of 2-aminoethyl methacrylate (AEMA) under UV-irradiation. X-ray photoelectron spectroscopy (XPS) confirmed the presence of nitrogen. The ninhydrin assay demonstrated, both quantitatively and qualitatively, the presence of free amines on the surface. Confocal fluorescence microscopy (CFM), atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to visualise the grafted surfaces, indicating the presence of pAEMA. Static contact angle (SCA) measurements indicated a permanent increase in hydrophilicity. Furthermore, the AEMA grafted surfaces were applied for comparing the physisorption and covalent immobilisation of gelatin. CFM demonstrated that only the covalent immobilisation lead to a complete coverage of the surface. Those gelatin-coated surfaces obtained were further coated using fibronectin. Osteosarcoma cells demonstrated better cell-adhesion and cell-viability on the modified surfaces, compared to the pure PCL films.

The introduction of amine groups on the surface of dielectric resins improves the adhesion with electrochemically deposited metals. In this work, etched epoxy resin surfaces are modified with aliphatic amines via a two step wet chemical reaction approach. First, cyanuric chloride is introduced on the surface. Next, the remaining reactive sites of cyanuric chloride are used to couple an aliphatic polyamine. Both reaction steps are optimized by variation of reaction parameters such as concentration, chemicals, temperature and time. A detailed surface characterization after each reaction step is provided using following techniques: ATR-IR, SEM–EDS, XPS and AFM.

Despite its widespread application in the fields of ophthalmology, orthopedics and dentistry and the stringent need for polymer packagings that induce in vivo tissue integration, the full potential of poly(methyl methacrylate) (PMMA) and its derivatives as medical device packaging material has not been explored yet. We therefore elaborated on the development of a universal coating for methacrylate-based materials which ideally should reveal cell-interactivity irrespective of the polymer substrate bulk properties. Within this perspective, the present work reports on the UV-induced synthesis of PMMA and its more flexible poly(ethyleneglycol) (PEG)-based derivative (PMMAPEG) and its subsequent surface decoration using polydopamine (PDA) as well as PDA combined with gelatin B (Gel B). Successful application of both layers was confirmed by multiple surface characterization techniques. The cell interactivity of the materials was studied by performing live-dead assays and immunostainings of the cytoskeletal components of fibroblasts. It can be concluded that only the combination of PDA and Gel B yields materials posessing similar cell interactivities, irrespective of the physicochemical properties of the underlying substrate. The proposed coating outperforms both the PDA functionalized and the pristine polymer surfaces. A universal cell-interactive coating for methacrylate-based medical device packaging materials has thus been realized.

Introduction: Mineralization of hydrogel biomaterials is considered desirable to improve their suitability as materials for bone regeneration[1],[2]. Hydrogels have been most commonly mineralized with calcium phosphate (CaP), but hydrogel-CaCO3 composites have received less attention. Magnesium (Mg) has been added to CaP to stimulate cell adhesion and proliferation and bone regeneration in vivo, but its effect as a component of carbonate-based biomaterials remains uninvestigated. In this study, gellan gum (GG) hydrogels were mineralized enzymatically with (CaCO3), Mg-enriched CaCO3 and magnesium carbonate to generate composite biomaterials for bone regeneration. GG is an inexpensive, biotechnologically produced anionic polysaccharide, from which hydrogels for cartilage regeneration have been formed by crosslinking with divalent ions[3].Methods: GG hydrogels were loaded with the enzyme urease by incubation in 5% (w/v) urease solution and mineralized for 5 days in five different media denoted as UA, UB, UC, UD and UE, which contained urea (0.17 M) and different concentrations of CaCl2 and MgCl2 (270:0, 202.5:67.5, 135:135, 67.5:202.5 and 0:250, respectively (mmol dm-3)). Discs were autoclaved and subjected to physiochemical, mechanical and cell biological characterization.Results: FTIR, SEM, TGA and XRD analysis revealed that increasing magnesium concentration decreased mineral crystallinity. At low magnesium concentrations calcite was formed, while at higher concentrations magnesian calcite was formed. Hydromagnesite formed at high magnesium concentration in the absence of calcium. Amount of mineral formed and compressive strength decreased with increasing magnesium concentration in the mineralization medium. ICP analysis revealed that Ca:Mg elemental ratio in the mineral formed was higher than in the respective mineralization media. Mineralization of hydrogels promoted adhesion and growth of osteoblast-like cells, which were supported best on mineralized hydrogels containing no or little magnesium. Hydrogels mineralized with hydromagnesite displayed higher cytotoxicity.Discussion: Enzymatic mineralization of GG hydrogels with CaCO3 in the form of calcite successfully reinforced hydrogels and promoted osteoblast-like cell adhesion and growth, but Mg enrichment had no positive effect. This is in contrast with other studies reporting that incorporation of Mg into GG mineralized with CaP promotes cell adhesion and proliferation[4]. Conclusion: Sample groups UA and UB seem to be the most promising due to the superior amount of mineral formed and cell adhesion and proliferation.

A ruthenium based benzylidene complex bearing an O,N-bidentate Schiff base ligand exhibits poor olefin metathesis activity but generates a highly active catalyst system when treated with acidic cocatalysts. Various Lewis acids were able to boost the ring opening metathesis polymerization (ROMP) of cycloocta-1,5-diene (COD). The best results were obtained with trichlorosilane (HSiCl3), which was also found to improve metathesis activity of the Grubbs second generation catalyst [RuCl2( CHPh)(H2IMes)(PCy3)] in the ROMP of COD and the ring closing metathesis (RCM) of diethyl diallylmalonate.

This study describes the qualitative analysis of the polymerization reaction of DCPD (DiCycloPentaDiene) and its reaction products. The polymerization was carried out using WCl6/Si(allyl)4 (1), first generation Grubbs’ (2) and second generation Grubbs’ (3) catalysts. When system 1 was used as a catalyst, solution concentration determined whether soluble or insoluble polymer was obtained. When Grubbs’ catalysts were employed, insoluble polymer was formed in all cases. The ring opening metathesis polymerization (ROMP)-reaction and the resulting polymers were monitored in situ via FT-Raman-spectroscopy. Using FT-Raman-spectroscopy, the stereospecific nature of the forming polymer can be determined during the polymerization reaction. The obtained spectra illustrate that the linear polymer has a prevailing cis double bond configuration, while the polymer formed using the 1e generation Grubbs catalyst has a predominant trans double bond configuration. The second generation Grubbs catalyst exhibits a poor stereoselectivity. These results are in accordance to literature data where the stereospecific nature of these polymers where determined using NMR-spectroscopy.

Item does not contain fulltext Hydrogels of biocompatible calcium-crosslinkable polysaccharide gellan gum (GG) were enriched with bioglass particles to enhance (i) mineralization with calcium phosphate (CaP); (ii) antibacterial properties and (iii) growth of bone-forming cells for future bone regeneration applications. Three bioglasses were compared, namely one calcium-rich and one calcium-poor preparation both produced by a sol-gel technique (hereafter referred to as A2 and S2, respectively) and one preparation of composition close to that of the commonly used 45S5 type (hereafter referred to as NBG). Incubation in SBF for 7 d, 14 d and 21 d caused apatite formation in bioglass-containing but not in bioglass-free samples, as confirmed by FTIR, XRD, SEM, ICP-OES, and measurements of dry mass, i.e. mass attributable to polymer and mineral and not water. Mechanical testing revealed an increase in compressive modulus in samples containing S2 and NBG but not A2. Antibacterial testing using biofilm-forming meticillin-resistant staphylococcus aureus (MRSA) showed markedly higher antibacterial activity of samples containing A2 and S2 than samples containing NBG and bioglass-free samples. Cell biological characterization using rat mesenchymal stem cells (rMSCs) revealed a stimulatory effect of NBG on rMSC differentiation. The addition of bioglass thus promotes GG mineralizability and, depending on bioglass type, antibacterial properties and rMSC differentiation.

The fast growing market of organic electronics, including organic photovoltaics (OPV), stimulates the development of versatile technologies for structuring thin-film materials. Ultraviolet lasers have proven their full potential for patterning single organic layers, but in a multilayer organic device the obtained layer selectivity is limited as all organic layers show high UV absorption. In this paper, we introduce mid-infrared (IR) resonant ablation as an alternative approach, in which a short pulse mid-infrared laser can be wavelength tuned to one of the molecular vibrational transitions of the organic material to be ablated. As a result, the technique is selective in respect of processing a diversity of organics, which usually have different infrared absorption bands. Mid-IR resonant ablation is demonstrated for a variety of organic thin films, employing both nanosecond (15 ns) and picosecond (250 ps) laser pulses tunable between 3 and 4 microns. The nanosecond experimental set-up is based on a commercial laser at 1064 nm pumping a singly resonant Optical Parametric Oscillator (OPO) built around a Periodically-Poled Lithium Niobate (PPLN) crystal with several Quasi-Phase Matching (QPM) periods, delivering more than 0.3 W of mid-IR power, corresponding to 15 μJ pulses. The picosecond laser set-up is based on Optical Parametric Amplification (OPA) in a similar crystal, allowing for a comparison between both pulse length regimes. The wavelength of the mid-infrared laser can be tuned to one of the molecular vibrational transitions of the organic material to be ablated. For that reason, the IR absorption spectra of the organic materials used in a typical OPV device were characterized in the wavelength region that can be reached by the laser setups. Focus was on OPV substrate materials, transparent conductive materials, hole transport materials, and absorber materials. The process has been successfully demonstrated for selective thin film patterning, and the influence of the various laser parameters is discussed.

Injectable composites for tissue regeneration can be developed by dispersion of inorganic microparticles and cells in a hydrogel phase. In this study, multifunctional carbonate microparticles containing different amounts of calcium, magnesium and zinc were mixed with solutions of gellan gum (GG), an anionic polysaccharide, to form injectable hydrogel-microparticle composites, containing Zn, Ca and Mg. Zn and Ca were incorporated into microparticle preparations to a greater extent than Mg. Microparticle groups were heterogeneous and contained microparticles of differing shape and elemental composition. Zn-rich microparticles were 'star shaped' and appeared to consist of small crystallites, while Zn-poor, Ca- and Mg-rich microparticles were irregular in shape and appeared to contain lager crystallites. Zn-free microparticle groups exhibited the best cytocompatibility and, unexpectedly, Zn-free composites showed the highest antibacterial activity towards methicilin-resistant Staphylococcus aureus. Composites containing Zn-free microparticles were cytocompatible and therefore appear most suitable for applications as an injectable biomaterial. This study proves the principle of creating bi- and tri-elemental microparticles to induce the gelation of GG to create injectable hydrogel-microparticle composites.

Item does not contain fulltext Thermosensitive chitosan hydrogels containing sodium beta-glycerophosphate (beta-GP), whose gelation is induced by increasing temperature to body temperature, were functionalized by incorporation of alkaline phosphatase (ALP), an enzyme involved in mineralization of bone. ALP incorporation led to acceleration of gelation upon increase of temperature for four different chitosan preparations of differing molecular weight, as demonstrated by rheometric time sweeps at 37 degrees C. Hydrogels containing ALP were subsequently incubated in calcium glycerophosphate (Ca-GP) solution to induce their mineralization with calcium phosphate (CaP) in order to improve their suitability as materials for bone replacement. Incorporated ALP retained its bioactivity and induced formation of CaP mineral, as confirmed by SEM, FTIR, Raman spectroscopy, XRD, ICP-OES, and increases in dry mass percentage, which rose with increasing ALP concentration and incubation time in Ca-GP solution. The results demonstrate that ALP accelerates formation of thermosensitive chitosan/beta-GP hydrogels and induces their mineralization with CaP, which paves the way for applications as injectable bone replacement materials.

The presence of polyamine groups on the surface of dielectric resins potentially improves the adhesion with electrochemically deposited metals. In this article, first cyanuric chloride is covalently bound to the surface hydroxyl groups of the epoxy resin. The remaining reactive sites on the coupled cyanuric chloride molecule are then used to anchor polyamines. New data on the triazine coupling is presented. The surface reactions are monitored and characterized by means of ATR-IR, SEM-EDS, XPS and ToF-S-SIMS.