Search

Cathode interfacial layers (CIL) have been applied in organic solar cells (OSCs) for the enhancement of photovoltaic characteristics. Most of them are employed in either conventional organic solar cells (COSCs) or inverted organic solar cells (IOSCs) only. Herein, we have designed and synthesized two cathode interfacial materials, namely, 3-(4,6-bis(4-bromophenoxy)-1,3,5-triazin-2-yl)-2,6-difluorophenyl)diphenylphosphine oxide (Br-PO-TAZ) and 4,4′-((6-(3-(diphenylphosphoryl)-2,4-difluorophenyl)-1,3,5-triazine-2,4-diyl)bis(oxy))dibenzonitrile (CN-PO-TAZ), and utilized them as CILs for both COSCs and IOSCs. The incorporation of our new CIL layers significantly enhanced the photovoltaic performance compared to COSCs and IOSCs without the CILs. The CN-PO-TAZ exhibited a power conversion efficiency (PCE) of 8.19% for COSCs and 8.33% for IOSCs, whereas Br-PO-TAZ yielded a PCE of 8.15% for COSCs and 8.23% for IOSCs, respectively. The improved performance was attributed to the multiple favorable factors: significantly reducing leakage current, decreasing series resistance, suppressing recombination, efficient charge transport and collection. Moreover, the CIL layers helped for sustaining device stability because they served as an internal shield against humidity.

Novel hole blocking materials (HBMs) based on 2,6-disubstituted dibenzo[b,d]furan and dibenzo[b,d]thiophene segments, 3,3′,3′′,3′′′-(dibenzo[b,d]furan-2,6-diylbis(benzene-5,3,1-triyl))tetrapyridine (26DBFPTPy) and 3,3′,3′′,3′′′-(dibenzo[b,d]thiophene-2,6-diylbis(benzene-5,3,1-triyl))tetrapyridine (26DBTPTPy), are successfully designed and synthesized for high-performance blue phosphorescent organic light-emitting diodes (PhOLEDs) for the first time. Computational simulation is used to investigate the optimal structure, orbital distribution, and physicochemical properties of both molecules. Thermal, optical, and electrochemical analysis shows that 26DBFPTPy and 26DBTPTPy possess high thermal stability, deep HOMO energy levels (−7.08 and −6.91 eV), and a high triplet energy (ET) (2.75 and 2.70 eV). Blue PhOLEDs with 26DBFPTPy or 26DBTPTPy as a hole blocking layer (HBL) exhibit a low turn-on voltage (3.0 V) and operating voltage (4.5 V) at 1000 cd m−2. In addition, the blue PhOLEDs with 26DBFPTPy or 26DBTPTPy show superior external quantum efficiencies (24.1 and 23.6%) and power efficiencies (43.9 and 42.7 lm W−1). They also show a very small efficiency roll-off of about 8.5% from 100 to 1000 cd m−2. Furthermore, they exhibit improved lifetimes compared to the similarly designed HBL with a pyridine electron transport unit and a phenyl core structure.

Novel hole blocking materials (HBMs) based on dibenzo[b,d]furan and dibenzo[b,d]thiophene molecular dimers have been rationally designed and synthesized for high-efficiency and long-lived blue phosphorescent organic light-emitting diodes (PhOLEDs). Thermal, optical, and electrochemical analyses show that [2,2′-bidibenzo[b,d]furan]-6,6′-diylbis(diphenylphosphine oxide) (DBF-d-PO), [2,2′-bidibenzo[b,d]thiophene]-6,6′-diylbis(diphenylphosphine oxide) (DBT-d-PO), 6,6′-di(pyridine-3-yl)-2,2′-bidibenzo[b,d]furan (DBF-d-Py), and 6,6′-di(pyridine-3-yl)-2,2′-bidibenzo[b,d]thiophene (DBT-d-Py) possess high thermal stability, deep highest occupied molecular orbital energy levels (−6.61 to −6.95 eV), and high triplet energy (ET) (2.68–2.95 eV). Blue PhOLEDs with DBF-d-PO, DBT-d-PO, DBF-d-Py, and DBT-d-Py exhibit low turn-on and operating voltages, excellent external quantum efficiency, and high current and power efficiencies. A blue PhOLED with DBF-d-Py shows the best efficiency with a maximum external quantum efficiency of 24.3%, a maximum current efficiency of 44.3 cd A−1, and a maximum power efficiency of 46.4 lm W−1. In addition, it exhibits an outstanding external quantum efficiency of 22.4% at a practical luminance of 1000 cd m−2 and a very high maximum luminance of 88 953 cd m−2 at 12 V. Furthermore, blue PhOLEDs with DBF-d-Py and DBT-d-Py exhibit highly improved lifetimes compared with the conventional HBM, BmPyPB, because of the efficient hole blocking by the deep HOMO energy level and the high thermal stability stabilizing hole blocking layer morphology.

This study describes a systematic study on side chain effect in the poly(thieno[3,4-b]thiophene)benzo[1,2-b:4,5-b′]dithiophene (PTB) polymer series based regioregular polymers with D1-A-D2-A configuration, denoted as PTT-BDT(R1)-TT-BDT(R2). The synthesized three regioregular polymers employ the same conjugated backbone but with different side chains (R1, R2), P1; hexyldecyl thiophene (HD, R1) and ethylhexyl thiophene (EH, R2), P2; hexyldecyl thiophene (HD, R1) and ethylhexylthio thiophene (S-EH, R2), P3; hexyldecylthio thiophene (S-HD, R1) and ethylhexylthio thiophene (S-EH, R2). Introduction of different side chains influenced optical, electrochemical, molecular packing properties, and device performance. The P3 polymer with alkylthio thiophene groups as R1 and R2 showed much broader light absorption and lower HOMO level than other polymers with relatively less alkylthio thiophene groups. Furthermore, the P3 polymer exhibited favorable polymer orientation and short π-π stacking distance for efficient charge transport in the BHJ PSCs. The P3 based bulk-heterojunction (BHJ) polymer solar cell (PSC) showed an improved PCE of 7.20% while the P1 and P2 based BHJ PSC devices showed PCEs of 5.27% and 6.45%, respectively. This result, within our knowledge, is the highest record among BHJ PSCs based PTB polymer series composed of benzo[1,2-b:4,5-b’]dithiophene (BDT) segment and non-fluorinated alkyl ester (COOR) side chain substituted thieno[3,4-b]thiophene (TT) segment.

Herein, 3D in-situ hollow carbon fiber/carbon nanosheet/Fe3C@Fe3O4 (h-CNF/CNS/Fe3C@Fe3O4) was constructed using ferrocene and oleic acid by a solventless one-step process that did not require additional filtering, neutralization, drying, or calcination steps. The iron-oleate chelating structure that self-assembled during annealing facilitated the fabrication of 3D in-situ h-CNF/CNS/Fe3C@Fe3O4 by undergoing graphitization at 600 °C. This carbon shell of the 3D in-situ h-CNF/CNS/Fe3C@Fe3O4 was derived from the two cyclopentadienyl rings in ferrocene. This hybrid material made from economically cheap oleic acid exhibited superior supercapacitive behavior: high specific capacitance of 327 F g−1 at 5 mV s−1 and 210 F g−1 at 10 mV s−1, good rate capability of 60 F g−1 at 10 A g−1 (compared to 70 F g−1 at 1 A g−1 for pure Fe3O4), and superior retention of 108% after 6000 cycles at 100 mV s−1. These superior supercapacitive properties were ascribed to the 3D graphitic h-CNF/CNS for enhancing electrical conductivity and the carbonaceous shell over Fe3C@Fe3O4 core for buffering the bulk expansion of iron-related particles.

A regioregular D1-A-D2-A terpolymer PDTSTTBDT incorporating dithieno[3,2-b:2′,3′-d]silole (DTS, D1) and benzo[1,2-b:4,5-b]dithiophene (BDT, D2) units with perfectly controlled thieno[3,4-b]thiophene (TT, A) orientation was synthesized for the first time. The thermal, optical, and electrochemical properties of the regioregular PDTSTTBDT were characterized and compared with the random PDTSTTBDT without structural regioregularity. The regioregular PDTSTTBDT showed ideal optical bandgap (1.45 eV), lower lying HOMO energy level, and higher degree of crystallinity compared to the random PDTSTTBDT. Moreover, it exhibited excellent solubility in nonhalogenated solvents as well as halogenated solvents. The inverted bulk-heterojunction polymer solar cells (PSCs) based on the regioregular PDTSTTBDT and o-xylene process solvent showed a power conversion efficiency as high as 6.14%, which is 500% higher than the random PDTSTTBDT-based PSCs. It was found that the remarkable enhancement of photovoltaic performance in re...

Terpolymers consisting of three monomers with one electron donor unit and two electron acceptor units are promising p-type polymers for polymer solar cells (PSCs) because the incorporation of a third monomer into a copolymer backbone provides synergetic effect on physical properties such as absorption ability, charge transport, and photovoltaic performance. Currently, novel p-type terpolymers need to be developed for high-efficiency PSCs, which can be processed with eco-friendly non-halogenated solvents. In this study, a new series of terpolymers composed of 4,8-di(2,3-didecylthiophen-5-yl)-benzo[1,2-b:4,5-b′]dithiophene (BDT), 4,7-di(thien-2-yl)-5,6-difluoro-2,1,3-benzothiadiazole (DTffBT), and benzo[1,2-c:4,5-c′]dithiophene-4,8-dione (BDD) segments was synthesized and characterized for high-performance PSCs processed with non-halogenated solvents. PBDTBD terpolymers (i.e., PBDTBD-25, PBDTBD-50, and PBDTBD-75) were synthesized by adjusting different ratios of DTffBT to BDD segment (25%, 50%, and 75% of DTffBT). PBDTBD terpolymers exhibited excellent solubility in non-halogenated solvents. The optical, electrochemical, and morphological properties of PBDTBD terpolymers were successfully controlled by modulating the molar ratio of DTffBT and BDD. Moreover, a PBDTBD-50:IT-4F blended film showed homogeneous film with a favorable face-on orientation. The PBDTBD-50:IT-4F blended film showed excellent hole and electron mobility, which resulted in a superior carrier balance. PBDTBD-50-based PSCs, processed with o-xylene, achieved the highest PCE of 10.03%, which is four times higher than those of copolymer-based PSCs. The novel terpolymers composed of one electron donor unit and two electron acceptor units are expected to make a considerable contribution to the development of high-performance PSCs.

Many researchers have reported dibenzo[b,d]furan segment as a building block of organic light-emitting diode (OLED) materials because it has high thermal stability and triplet energy. However, most of the research has focused on symmetrically substituting the same functional groups at 2-position due to easy functionalization or substituting the same functional groups at different positions of dibenzo[b,d]furan. Herein, we design and synthesize three new hole blocking materials based on asymmetrically difunctionalized dibenzo[b,d]furan, diphenyl (2-(pyridin-3-yl)dibenzo[b,d]furan-6-yl)phosphine oxide (DBFPO-Py), diphenyl(2-(pyrimidin-5-yl)dibenzo[b,d]furan-6-yl)phosphine oxide (DBFPO-Pyr), and diphenyl(2-(4-(triphenylsilyl)phenyl)dibenzo[b,d]furan-6-yl)phosphine oxide (DBFPO-Si) for high-performance phosphorescent OLEDs. Phosphine oxide, tetraphenylsilane, pyridine, and pyrimidine segments are successfully introduced into the asymmetric position of a dibenzo[b,d]furan. It is found that DBFPO-Py, DBFPO-Pyr, and DBFPO-Si possess high thermal stability; high triplet energies of 2.96, 2.98, and 2.80 eV; and deep highest occupied molecular orbital (HOMO) energy levels of −7.13, −7.23 and −7.07 eV; respectively. Blue phosphorescent OLEDs with DBFPO-Py, DBFPO-Pyr, and DBFPO-Si show low turn-on voltages, high current and power efficiencies, and superior external quantum efficiencies. Blue phosphorescent OLEDs with DBFPO-Py and DBFPO-Pyr showed improved performance in terms of current and power efficiencies, etc, compared with the device with 1,3-bis(3,5-dipyrid-3-yl-phenyl)benzene (BmPyPB), which is commonly used as a hole blocking layer. More importantly, the blue phosphorescent OLEDs with DBFPO-Pyr showed the best performance with maximum external quantum efficiency of 23.6%, current efficiency of 29.8 cd A−1, power efficiency of 26.0 lm W−1, and low efficiency roll-off of 6.38%. Novel hole blocking materials based on asymmetrically difunctionalized dibenzo[b,d]furan are expected to make a significant contribution to the development of blue phosphorescent OLEDs.

Ti-HMS samples in which titanium species exist in various forms of isolated tetrahedral state, finely dispersed TiO 2 cluster, and some in extra-framework anatase phase were prepared via a direct synthesis route using dodecylamine (DDS) as a structure directing agent by systematically varying the titanium loadings between 2 and 50 mol% Ti/(Ti+Si) in substrate composition. Physicochemical properties of the materials were evaluated using XRD, SEM/TEM, N 2 adsorption, UV-vis and XANES spectroscopies. Catalytic properties of Ti-HMS in cyclohexene and 2,6-di-tert-butyl phenol (2,6-DTBP) oxidation using aqueous H 2 O 2 , and vapor phase photocatalytic degradation of acetaldehyde were evaluated. High H 2 O 2 selectivity was obtained in cyclohexene oxidation, and cyclohexene conversion was found primarily dependent on the amount of tetrahedrally coordinated Ti sites. For bulky 2,6-DTBP oxidation and photocatalytic oxidation of acetaldehyde, on the other hand, conversions were found dependent on the total amount of Ti sites and maintaining an uniform mesoporous structure in the catalysts was not critical for efficient catalysis.