Search

We investigate the influence of the barrier type and the absorber doping on the open-circuit voltage of liquid phase-crystallized silicon solar cells on glass. It was found that the use of n-type instead of p-type substrates is the major reason for the recently reported boost of the open-circuit voltage ( $V_{\rm OC}$ ) up to values of 656 mV, which is by far exceeding the previously reported $V_{\rm OC}$ values of crystalline silicon solar cells on glass. Despite the high doping, locally, an internal quantum efficiency of $\text{90\%}$ can be achieved. Therewith, efficiencies of $\text{16\%}$ and up should be possible.

The suitability of ZnO:Al thin films for polycrystalline silicon (poly-Si) thin-film solar cell fabrication was investigated. The electrical and optical properties of 700 -nm-thick ZnO:Al films on glass were analyzed after typical annealing steps occurring during poly-Si film preparation. If the ZnO:Al layer is covered by a 30 nm thin silicon film, the initial sheet resistance of ZnO:Al drops from 4.2 to 2.2 Ω after 22 h annealing at 600 °C and only slightly increases for a 200 s heat treatment at 900 °C. A thin-film solar cell concept consisting of poly-Si films on ZnO:Al coated glass is introduced. First solar cell results will be presented using absorber layers either prepared by solid-phase crystallization (SPC) or by direct deposition at 600 °C.