Search

Demethoxycurcumin (DMC), through a self-assembled amphiphilic carbomethyl-hexanoyl chitosan (CHC) nanomatrix has been successfully developed and used as a therapeutic approach to inhibit cisplatin-induced drug resistance by suppressing excision repair cross-complementary 1 (ERCC1) in non-small cell lung carcinoma cells (NSCLC). Previously, DMC significantly inhibited on-target cisplatin resistance protein, ERCC1, via PI3K-Akt-snail pathways in NSCLC. However, low water solubility and bioavailability of DMC causes systemic elimination and prevents its clinical application. To increase its bioavailability and targeting capacity toward cancer cells, a DMC-polyvinylpyrrolidone core phase was prepared, followed by encapsulating in a CHC shell to form a DMC-loaded core-shell hydrogel nanoparticles (DMC-CHC NPs). We aimed to understand whether DMC-CHC NPs efficiently potentiate cisplatin-induced apoptosis through downregulation of ERCC1 in NSCLC. DMC-CHC NPs displayed good cellular uptake efficiency. Dissolved in water, DMC-CHC NPs showed comparable cytotoxic potency with free DMC (dissolved in DMSO). A sulforhodamine B (SRB) assay indicated that DMC-CHC NPs significantly increased cisplatin-induced cytotoxicity by highly efficient intracellular delivery of the encapsulated DMC. A combination of DMC-CHC NPs and cisplatin significantly inhibited on-target cisplatin resistance protein, ERCC1, via the PI3K-Akt pathway. Also, this combination treatment markedly increased the post-target cisplatin resistance pathway including bax, and cytochrome c expressions. Thymidine phosphorylase (TP), a main role of the pyrimidine salvage pathway, was also highly inhibited by the combination treatment. The results suggested that enhancement of the cytotoxicity to cisplatin via administration of DMC-CHC NPs was mediated by down-regulation of the expression of TP, and ERCC1, regulated via the PI3K-Akt pathway., Competing Interests: The authors declare no competing financial interest.

Lung cancer kills more humans than any other cancer and multidrug resistance (MDR) in cancer stem-like cells (CSC) is emerging as a reason for failed treatments. One concept that addresses this root cause of treatment failure is the utilization of nanoparticles to simultaneously deliver dual drugs to cancer cells with synergistic performance, easy to envision - hard to achieve. (1) It is challenging to simultaneously load drugs of highly different physicochemical properties into one nanoparticle, (2) release kinetics may differ between drugs and (3) general requirements for biomedical nanoparticles apply. Here self-assembled nanoparticles of amphiphilic carboxymethyl-hexanoyl chitosan (CHC) were shown to present nano-microenvironments enabling simultaneous loading of hydrophilic and hydrophobic drugs. This was expanded into a dual-drug nano-delivery system to treat lung CSC. CHC nanoparticles were loaded/chemically modified with the anticancer drug cisplatin and the MDR-suppressing Chinese herbal extract demethoxycurcumin, followed by biofunctionalization with CD133 antibody for enhanced uptake by lung CSC, all in a feasible one-pot preparation. The nanoparticles were characterized with regard to chemistry, size, zeta potential and drug loading/release. Biofunctionalized and non-functionalized nanoparticles were investigated for uptake by lung CSC. Subsequently the cytotoxicity of single and dual drugs, free in solution or in nanoparticles, was evaluated against lung CSC at different doses. From the dose response at different concentrations the degree of synergy was determined through Chou-Talalay's Plot. The biofunctionalized nanoparticles promoted synergistic effects between the drugs and were highly effective against MDR lung CSC. The efficacy and feasible one-pot preparation suggests preclinical studies using relevant disease models to be justified., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Targeting controlled release core-shell nanocarriers with the potential to overcome multidrug resistant (MDR) lung cancer were prepared based on demethoxycurcumin (DMC) loaded amphiphilic chitosan nanoparticles coated with an anti-EGFR antibody layer. The nanocarriers were characterized with regard to size with dynamic light scattering, SEM, and TEM. The characterization confirmed the nanocarriers to have a surface coating of the anti-EGFR antibody and a final size excellently suited for circulating targeting nanocarriers, i.e., <200 nm in diameter. In vitro drug release revealed extended quasi-Fickian release from the nanocarriers, with the anti-EGFR layer further reducing the release rate. Cell culture experiments using normoxic and MDR hypoxic cells overexpressing EGFR confirmed improved DMC delivery for anti-EGFR coated particles and revealed that the DMC was delivered to the cytoplasmic region of the cells, forming nanoprecipitates in lysosomes and endosomes. The effective endocytosis and targeting of the core-shell nanoparticles resulted in the nanocarriers achieving high cytotoxicity also against MDR cells. The therapeutic potential was further confirmed in an A549 xenograft lung tumor mouse model, where DMC loaded core-shell nanocarriers achieved about 8-fold reduction in tumor volume compared with control group over the 8 weeks of the investigation. Both in vitro and in vivo data suggest the anti-EGFR coated core-shell nanocarriers as highly promising for treatment of hypoxic MDR cancers, especially for non-small cell lung cancer.

Hydrogels composed of assembled colloids is a material class that is currently receiving much interest and shows great promise for use in biomedical applications. This emerging material class presents unique properties derived from the combination of nanosized domains in the form of colloidal particles with a continuous gel network and an interspersed liquid phase. Here we developed an amphiphilic chitosan-based, thermogelling, shear-reversible colloidal gel system for improved glaucoma treatment and addressed how preparation procedures and loading with the anti-glaucoma drug latanoprost and commonly used preservative benzalkonium chloride influenced the mechanical properties of and drug release from the colloidal gels. The results highlight that incorporated substances and preparation procedures have effects both on mechanical properties and drug release, but that the release of drug loaded in the colloidal carriers is mainly limited by transport out of the carriers, rather than by diffusion within the gel. The developed colloidal chitosan based gels hold outstanding biomedical potential, as confirmed by the ease of preparation and administration, low cytotoxicity in MTT assay, excellent biocompatibility and lowering of intraocular pressure for 40 days in a rabbit glaucoma model. The findings clearly justify further investigations towards clinical use in the treatment of glaucoma. Furthermore, the use of this shear-reversible colloidal gel could easily be extended to localized treatment of a number of critical conditions, from chronic disorders to cancer, potentially resulting in a number of new therapeutics with improved clinical performance., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

In this communication, we report a facile nanotopographical control over a stainless steel surface via an electrophoretic deposition of colloidal amphiphilic chitosan for preferential growth, proliferation or migration of vascular smooth muscle cells (VSMCs) and human umbilical vein endothelial cells (HUVECs). Atomic force microscopy revealed that the colloidal surface exhibited a deposition time-dependent nanotopographical evolution, wherein two different nanotopographic textures indexed by 'kurtosis' (Rkur) value were easily designed, which were termed as 'sharp' (i.e. high peak-to-valley texture) surface and 'flat' (i.e. low peak-to-valley texture) surface. Cellular behaviour of VSMCs and HUVECs on both surfaces demonstrated topographically dependent morphogenesis, adherent responses and biochemical properties in comparison with bare stainless steel. The formation of a biofunctionalized surface upon a facile colloidal chitosan deposition envisions the potential application towards numerous biomedical devices, and this is especially promising for cardiovascular stents wherein a new surface with optimized texture can be designed and is expected to create an advantageous environment to stimulate HUVEC growth for improved healing performance.

Induced pluripotent stem cells (iPSCs) have promising potential in regenerative medicine, but whether iPSCs can promote corneal reconstruction remains undetermined. In this study, we successfully reprogrammed human corneal keratocytes into iPSCs. To prevent feeder cell contamination, these iPSCs were cultured onto a serum- and feeder-free system in which they remained stable through 30 passages and showed ESC-like pluripotent property. To investigate the availability of iPSCs as bioengineered substitutes in corneal repair, we developed a thermo-gelling injectable amphiphatic carboxymethyl-hexanoyl chitosan (CHC) nanoscale hydrogel and found that such gel increased the viability and CD44+proportion of iPSCs, and maintained their stem-cell like gene expression, in the presence of culture media. Combined treatment of iPSC with CHC hydrogel (iPSC/CHC hydrogel) facilitated wound healing in surgical abrasion-injured corneas. In severe corneal damage induced by alkaline, iPSC/CHC hydrogel enhanced corneal reconstruction by downregulating oxidative stress and recruiting endogenous epithelial cells to restore corneal epithelial thickness. Therefore, we demonstrated that these human keratocyte-reprogrammed iPSCs, when combined with CHC hydrogel, can be used as a rapid delivery system to efficiently enhance corneal wound healing. In addition, iPSCs reprogrammed from corneal surgical residues may serve as an alternative cell source for personalized therapies for human corneal damage., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Thermo-gelling injectable nanogels, with no burst release of loaded drug, were prepared by a simple route by combining self assembled nanocapsules of amphiphilically modified chitosan with glycerophosphate di-sodium salt and glycerol. The potential as a depot drug delivery system was demonstrated in vivo through the therapeutic effect of ethosuximide (ESM) loaded nanogels, suppressing spike wave discharges (SWDs) in Long Evan rat model. Simultaneously clearance of gels from the site of administration was monitored non-invasively using MRI. The gel structure was characterized using TEM and SEM, confirming the gels to be an assembly of nanocapsules and using two-photon microscopy to visualize the network structure. In vitro drug release studies using ESM revealed that the nanogels exhibited extended, mostly Fickian release. Finally, all investigated formulations displayed excellent cytotoxicity data determined by MTT assay using human retinal pigmented epithelium cells. All presented properties are highly desirable for injectable depot gels for drug delivery., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Silane-modified amphiphilic chitosan was synthesized by anchoring a silane coupling agent, (3-aminopropyl)triethoxysilane, to a novel amphiphilic carboxymethyl-hexanoyl chitosan (CHC). The chemical structure of this new organic-inorganic hybrid molecule was characterized by FTIR and 13C-, 29Si-nuclear magnetic resonance, while the structural evolution was examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and dynamic light scattering (DLS). Experimental results indicated a self-assembly behaviour of molecules into nanoparticles with a stable polygonal geometry, consisting of ordered silane layers of 6 nm in thickness. The self-assembly property was found to be influenced by chemical composition and concentration of silane incorporated, while the size can be varied by the amount of anchored silane. It was also demonstrated that such vesicle exhibited excellent cytocompatibility and cellular internalization capability in ARPE-19 cell line, and presented well-controlled encapsulation and release profiles for (S)-(+)-camptothecin. These unique properties render it as a potential drug delivery nanosystem., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

In the present study, the nanoparticles with size of 50-130 nm composed of chitosan (CS) and tetraethyl orthosilicate (TEOS), which showed electrically-controlled release profile, were prepared. Myoglobin was encapsulated into the nanoparticles with an encapsulation efficiency as high as 91.5% and a maximum loading capacity of 70.2% that can be achieved. Here, TEOS was hydrolyzed and condensed to form interpenetration network with CS. Increase of TEOS content results in a shift of the release profile from swelling-controlled towards diffusion-controlled mechanism. The "slow-to-burst" and "near-zero" release of the myoglobin can be effectively controlled by applying DC electric field between "on" and "off".

Nanocomposites hydrogel (nanohydrogel) composed of chitosan (CS) and montmorillonite (MMT) were prepared and systematically studied for drug release behavior following electrostimulation. The deterioration of the responsiveness and reversibility of CS upon repeated on-off electrostimulation switching operations are major limitations for clinical applications, as it suffers from too much structural instability for the precise control of the release of drug upon cyclic electrostimulation. To overcome these limitations, an inorganic phase, MMT, was incorporated in the CS matrix to enhance the anti-fatigue property and corresponding long-term stable release kinetics. X-ray diffraction analysis and time-dependent optical absorbance showed that the MMT incorporated into the nanohydrogel exhibited an exfoliated nanostructure. The exfoliated silica nanosheets are able to act as cross-linkers to form a network structure between the CS and MMT, and this difference in the cross-linking density strongly affects the release of vitamin B(12) under electrostimulation. With a lower MMT concentration (1 wt.%), the release kinetics of vitamin B(12) from the nanohydrogel shows a pseudo-zero-order release, and the release mechanism was changed from a diffusion-controlled mode to a swelling-controlled mode under electrostimulation. Further increasing the MMT content reduced both the diffusion exponent n and the responsiveness of the nanohydrogel to electrostimulation. In addition, a consecutively repeated "on" and "off" operation shows that the electroresponsiveness of the nanohydrogel with higher MMT concentrations was reduced, but its anti-fatigue behavior was considerably improved. In this work, the nanohydrogel with 2 wt.% MMT achieved a mechanically reliable and practically desirable pulsatile release profile and excellent anti-fatigue behavior, compared with that of the pure CS.

Electrostimulus-responsive hybrid composites composed of chitosan (CS) and clay were successfully developed and systematically characterized. The addition of negatively charged clay as an ionic cross-linker strongly affect the cross-linking density as well as the mechanical property, swelling-deswelling behavior and fatigue property of the hybrids. With lower clay content, the crystallinity of the CS was slightly reduced, resulting in a decrease in the mechanical properties and an increase in the swelling ratio of the hybrid. However, the swelling kinetics were accelerated due to a reduction in CS crystallinity. On the other hand, with increasing clay concentration, the increased cross-linked bonding mechanically reinforced the hybrid beyond the aforementioned adverse effect, to show improved tensile strength and a decrease in the swelling ratio. The voltage-induced deformation of hybrids became more pronounced with increasing applied voltage, but became less pronounced with increasing clay content under an applied electric field. After repeatedly switching the electric field on and off, the higher clay concentration (C(clay)>0.5wt.%) of the hybrid composites maintained the same capability of deswelling and swelling after more than 10 cycles, compared with both the pure CS film and the hybrid composites with lower clay content (e.g., 0.5wt.%). Compared with pure CS, a significant improvement in the anti-fatigue property against cyclic electric stimulations of the hybrid was found, which encourages the use of such a new class of hybrid composite in medical and pharmaceutical applications.

Carboxymethyl-hexanoyl chitosan (NOCHC) amphiphatic hydrogel with excellent water-absorption and water-retention abilities under neutral conditions was successfully synthesized for the first time and then employed as a carrier for delivering amphiphatic agents. NOCHC is a water-soluble chitosan derivative bearing the carboxymethyl (hydrophilic) group and the hexanoyl (hydrophobic) group, which was synthesized using N,O-carboxymethyl chitosan (NOCC) as the starting precursor. Water-absorption ability (W(c)), water-retention ability, and drug encapsulation efficiency of the NOCHC hydrogel were investigated in terms of the degree of carboxymethyl and hexanoyl substitution. It was found that the amount of moisture uptake was dependent on the relative humidity as well as degree and nature of such substitution. The hexanoyl substitution affected significantly the water-absorption ability by altering the number of water-binding sites and the state of water under low humidity and the fully swollen state, respectively. In addition, the presence of hydrophobic hexanoyl substitution significantly retards water mobility during deswelling, causing better water-retention ability. Moreover, compared with that of pristine chitosan and NOCC, the encapsulation efficiency of ibuprofen (partially hydrophobic agent) was significantly enhanced with the incorporation of the hexanoyl group. These results demonstrate that the newly developed NOCHC amphiphatic hydrogel showed enhanced water-absorption ability, water-retention ability, and amphiphatic drug encapsulation efficiency compared with NOCC and chitosan.

In order to explore the effect of nanofiller on the regulation of the drug release behavior from microsphere-embedded hydrogel prepared by carboxymethyl-hexanoyl chitosan (HNOCC) and O-hexanoyl chitosan (OHC), the release kinetics was investigated in terms of various amounts of calcium-deficient hydroxyapatite (CDHA) nanoparticles incorporated. HNOCC is a novel chitosan-based hydrophilic matrix with a burst release profile in a highly swollen state. The drug release kinetics of the HNOCC hydrogel can be regulated by incorporation of well-dispersed CDHA nanoparticles. It was found that the release duration of ibuprofen (IBU) from HNOCC was prolonged with increasing amounts of CDHA which acts as a crosslink agent and diffusion barrier. On the contrary, the release duration of the IBU from OHC (hydrophobic phase) was shortened through increasing the CDHA amount over 5%, which is due to the hydrophilic nature of the CDHA nanoparticles destroying the intermolecular hydrophobic interaction and accelerating OHC degradation. Thus, water accessibility and molecular relaxation were enhanced, resulting in a higher release rate. In addition, sustained and sequential release behavior was achieved by embedding the OHC microspheres (hydrophobic phase) into the HNOCC (hydrophilic phase) matrix, which could significantly prolong the release duration of the HNOCC drug-loaded implant.

To explore the effect of nanofiller-polymer interaction on the drug release behaviour from a monolithic membrane prepared by Ca-deficient hydroxyapatite (CDHA)/chitosan nanocomposite, release kinetics was investigated in terms of different synthetic processes, i.e. in situ and ex situ routes, and various amounts of CDHA. It was found that a higher value of diffusion exponent (n) was obtained for the membranes in situ synthesized compared with those ex situ prepared. In addition, the n value of the membranes in situ synthesized increased with increasing CDHA amount, which remained in the range below 10wt.%. However, as CDHA content exceeded 30%, the n value remained constant. It indicates that the drug diffusion mechanism is altered by the CDHA-chitosan interaction which is strongly influenced by both the synthesis process and the concentration of the CDHA nanofiller in the membrane. On the other hand, a lower permeability (P) value of the membranes was observed for those prepared via the in situ process. Furthermore, P value decreased and increased with increasing CDHA amount in the range below and above 10wt.%, respectively. It demonstrates that CDHA nanofillers act either diffusion barrier or diffusion enhancer for the CDHA/chitosan membranes, which is determined by the concentration of CDHA nanofiller and the synthesis route of nanocomposite.

Background: Stimulus-responsive devices have emerged as a novel approach for local drug delivery. This study investigates the feasibility of a novel chitosan-based, pH-responsive hydrogel loaded with N-phenacylthiazolium bromide (PTB), which cleaves the crosslinks of advanced glycation end products on the extracellular matrix.Methods: A chitosan-based hydrogel loaded with PTB was fabricated, and the in vitro release profile was evaluated within pH 5.5 to 7.4. BALB/cJ mice and Sprague-Dawley rats were used to evaluate the effects during the induction and recovery phases of periodontitis, respectively, and animals in each phase were divided into four groups: 1) no periodontitis induction; 2) ligature-induced experimental periodontitis (group PR); 3) experimental periodontitis plus hydrogel without PTB (group PH); and 4) experimental periodontitis plus hydrogel with PTB (group PP). The therapeutic effects were evaluated by microcomputed tomographic imaging of periodontal bone level (PBL) loss and histomorphometry for inflammatory cell infiltration and collagen density.Results: PTB was released faster at pH 5.5 to 6.5 and consistently slower at pH 7.4. In the induction phase, PBL and inflammatory cell infiltration were significantly reduced in group PP relative to group PR, and the loss of collagen matrix was significantly reduced relative to that observed in group PH. In the recovery phase, PBL and inflammatory cell infiltration were significantly reduced, and significantly greater collagen deposition was noted in group PP relative to groups PR and PH at 4 and 14 days after silk removal.Conclusion: Chitosan-based, pH-responsive hydrogels loaded with PTB can retard the initiation of and facilitate the recovery from experimental periodontitis. [ABSTRACT FROM AUTHOR]

• The self-assembly of amphiphilic chitosan (CHC) in aqueous solution was disclosed in this study. • The DMC as a molecular probe was used to evaluate structural evolution and entrapping efficiency. • The associated DMC in the helical CHC drug nanocarriers gives an advantage for drug delivery. This investigation reports the nanostructural evolution and associated encapsulation and elution of a hydrophobic drug, demethoxycurcumin (DMC), as a molecular probe, with the carboxymethyl-hexanoyl chitosan (CHC), which has been a technically interesting amphiphilic chitosan-based polymer successfully developed in this lab for years. The self-assembly nature of the CHC in neutral aqueous solutions allowed efficient encapsulation of various drugs without deteriorating or changing drugs' activity. However, its self-assembly behavior associated with nanostructural stability or variation, in terms of residence time in aqueous solution has not been well characterized and how the CHC nanostructure may be altered upon entrapping a drug, followed releasing out of the nanostructure. In this study, the CHC/DMC assembled model was used to evaluate entrapping efficiency, CHC-DMC interaction, and nanostructural variation while the drug being encapsulated and released from the CHC nanoparticles. Experimental outcomes showed a fractal transition between nanoparticulate and short fiber-like network evolution of the CHC as time elapsed, with the presence or absence of the DMC probe. This entrapment of DMC is relatively efficient upon CHC assembly and the associated DMC arrangement inside the helical CHC macromolecule gave largely increasing space over the resulting CHC/DMC assembly. Its excellent colloidal and nanostructural stability over a reasonably long period of time in testing environment suggests that this CHC/DMC assembly not only provides a crucial advantage for drug delivery application but also considers as a nanostructural model for better understanding of the mechanism upon drug encapsulation and elution which may be applicable to alternative amphiphilic polysaccharide-based macromolecules. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Magnetic resonance imaging (MRI) has been one of the most frequently-used diagnostic tools with high dimensional precision and positioning accuracy in clinical practices. To achieve contrast enhancement, utilization of high-efficient MR imaging contrast agents becomes a prime consideration and is indispensably reinforced the diagnosis precision, especially for the emerging precision medicine. Gadolinium (Gd)-based complexes has been widely used in current clinical MRI operations, however, numerous side effects were reported and highlighted in clinic. Those drawbacks render specific unmet needs to be clinically and technically improved with a new version of Gd-based compound. Here we report a newly-synthesized amphiphilic Gadodiamide-conjugated carboxymethyl-hexanoyl chitosan (termed as CHC-Gd) hybrid. The gadodiamide was selected is due to its smallest molecular size among other Gd-based complexes reported in literature, which assumed to give least influence on the resulting physicochemical properties such as colloidal stability, nanostructural evolution, and cytocompability, particularly self-assembly capability, of the resulting hybrid upon practical uses. Experimental outcomes showed a successful synthesis of the CHC-Gd hybrid using a one-pot synthesis protocol, where the gadodiamide complexes were covalently attached to the carboxyl groups along the CHC backbone. Self-assembly behavior can be observed to form a sphere-like nanoparticle of 100–200 nm in size as of amphiphilic native CHC macromolecule. Experimental outcomes indicated a largely improved cytocompatibility of the hybrid, compared with free Gd, suggesting the Gd+3 ions were well stabilized in the CHC nanostructure. Excellent contrastability in-vitro and in particular in vivo were measured, where for in-vivo test, a 10-40-folded reduction in dosage, compared with clinical Gd dose, was used and demonstrated a comparative-to-better imaging resolution and brightness. Therefore, from this preliminary investigation, a potential translation to clinical practice through the use of newly-synthesized amphiphilic CHC-Gd hybrid appears to be relatively promising. [ABSTRACT FROM AUTHOR]

Metallic nanoparticles have been utilized as analytical tools to detect a wide range of organic analytes. In most reports, gold (Au)-based nanosensors have been modified with ligands to introduce selectivity towards a specific target molecule. However, in a recent study a new concept was presented where bare Au-nanorods on self-assembled carboxymethyl-hexanoyl chitosan (CHC) nanocarriers achieved sensitive and selective detection of human serum albumin (HSA) after manipulation of the solution pH. Here this concept was further advanced through optimization of the ratio between Au-nanorods and CHC nanocarriers to create a nanotechnology-based sensor (termed CHC-AuNR nanoprobe) with an outstanding lower detection limit (LDL) for HSA. The CHC-AuNR nanoprobe was evaluated in simulated urine solution and a LDL as low as 1.5 pM was achieved at an estimated AuNR/CHC ratio of 2. Elemental mapping and protein adsorption kinetics over three orders of magnitude in HSA concentration confirmed accumulation of HSA on the nanorods and revealed the adsorption to be completed within 15 min for all investigated concentrations. The results suggest that the CHC-AuNR nanoprobe has potential to be utilized for cost-effective detection of analytes in complex liquids. [ABSTRACT FROM AUTHOR]

Abstract: Metallic nanoparticles have been utilized as an analytical tool to detecting a wide variety of organic analytes. Among them, gold nanoparticles demonstrating outstanding surface plasmonic resonance property have been well recognized and received wide attention for plasmon-based sensing applications. However, in literature, gold-based nanosensor has to be integrated with specific “ligand” molecule in order to gain molecular recognition ability. However, “ligand” molecules, included proteins, peptides, nucleic acids, etc. are expensive and vulnerable to environmental change, in the meantime, anchoring procedure of the “ligand” molecules to gold surface may be cost-ineffective and endangered to the ligand′s activity, making a final analytic probe less reliable and risk in production capability. Here, we develop a new approach by designing a colloid-type sensor using a few “bare” Au nanorods deposited on the surface of a colloidal chitosan carrier. By tuning the solution pH, the resulting colloidal nanoprobe is capable of detecting proteins, i.e., human serum albumin and lysozyme, with high specificity and sensitivity. This new approach allows a new type of the molecular probes to be well manipulated to monitor important biomolecules for medical detection, diagnosis, and bioengineering applications. [Copyright &y& Elsevier]

Abstract: Chitosan is among the most abundant biopolymers on earth and has been either used or exhibited potential in a wide variety of industrial and biomedical applications. With the advancement of materials technologies, chitosan has been chemically modified to self-assemble into nanoarchitectures that are usable in advanced biomedical applications, such as drug nanocarriers, macroscopic injectables, tissue-engineering scaffolds, and nanoimaging agents. Colloidal amphiphilically modified chitosan (AMC) is a relatively recent material receiving increased attention with numerous publications addressing the medical advantages of specific systems. To date, many reviews have focused on the synthesis and biomedical properties of chitosan-based biomaterials, but a comprehensive study focusing on the colloidal properties of AMC in relation to biomedical performance appears to be lacking. This review provides a survey of the field, critically reviewing the colloidal properties and biomedical performance of AMC systems, such as nanoparticle drug delivery systems and macroscopic medical devices. Finally, the future development, market potential, and clinical implications of these promising colloidal-structured biomaterials are summarised. [Copyright &y& Elsevier]