Search

The aim of this work was to investigate the complex phenomena underlying the adsorption of an anti-human IL-8 (anti-IL8) monoclonal antibody (mAb) to m-aminophenylboronate (m-APBA) by Flow Microcalorimetry (FMC) and to understand the role of non-specific interactions in the adsorption process. FMC was exploited as a dynamic on-line method to measure instantaneous heat energy transfers in order to understand the surface phenomena underlying mAb's adsorption towards the synthetic ligand m-APBA under different pH (7.5, 8.5, 9.0, 9.5 and 10.0) and salt concentrations (0 and 150 mM NaCl). Results showed that the adsorption of anti-IL8 mAb to m-APBA is enthalpically driven (ΔH ads <0), as expected for the predominant reversible esterification reaction between boronates and cis-diols-containing molecules. For all the pH conditions studied, thermograms presented a first exothermic peak, characteristic of the reversible esterification reaction between mAb (pI≥9.3) and m-APBA (pKa = 8.8), except at pH 9.0 in the presence of 150 mM NaCl, for which the thermogram presented a first endothermic peak. The heat of adsorption (ΔH ads ) obtained at conditions where cis-diol interactions were predominant was approximately -243 ± 38 kJ/mol against -82 ± 14 kJ/mol (p-value < 0.05) obtained at pH 9.0 with 150 mM NaCl. The observed shift in the thermogram profile at pH 9.0, 150 mM NaCl, and the consequent decrease of 60-70% in ΔH ads were indicative of the promotion of electrostatic interactions between the protein and the ligand. Overall, and whereas the binding of the PBA ligand to mAb molecules has been described for decades as being affinity-based, our study demonstrates the multimodal behaviour of this interaction and contributes towards the understanding of the adsorption thermodynamics., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Phenylboronate chromatography (PBC) has been applied for several years, however details regarding the mechanisms of interactions between the ligand and biomolecules are still scarce. The goal of this work is to investigate the various chemical interactions between proteins and their ligands, using a protein library containing both glycosylated and nonglycosylated proteins. Differences in the adsorption of these proteins over a pH range from 4 to 9 were related to two main properties: charge and presence of glycans. Acidic or neutral proteins were strongly adsorbed below pH 8 although the uncharged trigonal form of phenylboronate (PB) is less susceptible to forming electrostatic and cis-diol interactions with proteins. The glycosylated proteins were only adsorbed above pH 8 when the electrostatic repulsion between the boronate anion and the protein surface was mitigated (at 200 mM NaCl). All basic proteins were highly adsorbed above pH 8 with PB also acting as a cation-exchanger with binding occurring through electrostatic interactions. Batch adsorption performed at acidic conditions in the presence of Lewis base showed that charge-transfer interactions are critical for protein retention. This study demonstrates the multimodal interaction of PBC, which can be a selective tool for separation of different classes of proteins., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, phenylboronic acid (PBA) was thoroughly investigated as a synthetic ligand for the purification of an immunoglobulin G (IgG) from a clarified cell supernatant from Chinese Hamster Ovary (CHO) cell cultures. In particular, the study was focused on the development of a washing step and in the optimization of the elution step using a serum containing supernatant. From the different conditions tested, best recoveries - 99% - and purifications - protein purity of 81% and a purification factor of 16 out of a maximum of 20 - were achieved using 100mM d-sorbitol in 10mM Tris-HCl as washing buffer and 0.5M d-sorbitol with 150mM NaCl in 10mM Tris-HCl as elution buffer. The purification outcome was also compared with protein A chromatography that revealed a recovery of 99%, 87% protein purity and 29 out of a maximum of 33 purification factor. Following the main purification, purified IgG was characterized in terms of isoelectric point, size and activity. In the end, a proof of concept was performed using two different mAbs from serum-free CHO cell cultures., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This study addresses the feasibility of scaling-up the removal of host cell impurities from plasmid DNA (pDNA)-containing Escherichia coli lysates by phenyl-boronic (PB) acid chromatography using columns packed with 7.6 and 15.2 cm(3) of controlled porous glass beads (CPG) derivatized with PB ligands. Equilibration was performed with water at 10 cm(3) /min and no conditioning of the lysate feed was required. At a ratio of lysate feed to adsorbent volume of 1.3, 93-96% of pDNA was recovered in the flow through while 66-71% of impurities remained bound (~2.5-fold purification). The entire sequence of loading, washing, elution, and re-equilibration was completed in 20 min. Run-to-run consistency was observed in terms of chromatogram features and performance (yield, purification factor, agarose electrophoresis) across the different amounts of adsorbent (0.75-15.2 cm(3) ) by performing successive injections of lysates prepared independently and containing 3.7 or 6.1 kbp plasmids. The column productivity at large scale was 4 dm(3) of alkaline lysate per hour per dm(3) of PB-CPG resin. The method is rapid, reproducible, simple, and straightforward to scale-up. Furthermore, it is capable of handling heavily contaminated samples, constituting a good alternative to purification techniques such as isopropanol precipitation, aqueous two-phase systems, and tangential flow filtration., (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work we have evaluated the potential of boronic acid functionalized magnetic particles for the one-step capture of a human monoclonal antibody (mAb) from a Chinese hamster ovary (CHO) cell culture supernatant. For comparison, Protein A coated magnetic particles were also used. The most important factor influencing the overall process yield and product purity in boronic acid particles was found to be the binding pH. Basic pH values promoted higher purities while resulting in decreased yields due to the competing effects of molecules such as glucose and lactate present in the cell culture supernatant. After optimization, the particles were successfully used in a multi-cycle purification process of the mAb from the CHO feedstock. Boronic acid particles were able to achieve an average overall yield of 86% with 88% removal of CHO host cell proteins (HCP) when the binding was performed at pH 7.4, while at pH 8.5 these values were 58% and 97%, respectively. In both cases, genomic DNA removal was in excess of 97%. Comparatively, Protein A particles recorded an average overall yield of 80% and an HCP removal greater than 99%. The adsorption of the mAb to the boronic acid particles was shown to be mediated by strong affinity interactions. Overall, boronic acid based purification processes can offer a cost-effective alternative to Protein A as the direct capturing step from the mammalian cell culture., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Plasmid DNA (pDNA) is purified directly from alkaline lysis-derived Escherichia coli (E. coli) lysates by phenyl boronate (PB) chromatography. The method explores the ability of PB ligands to bind covalently, but reversibly, to cis-diol-containing impurities like RNA and lipopolysaccharides (LPS), leaving pDNA in solution. In spite of this specificity, cis-diol free species like proteins and genomic DNA (gDNA) are also removed. This is a major advantage since the process is designed to keep the target pDNA from binding. The focus of this paper is on the study of the secondary interactions between the impurities (RNA, gDNA, proteins, LPS) in a pDNA-containing lysate and 3-amino PB controlled pore glass (CPG) matrices. Runs were designed to evaluate the role of adsorption buffer composition, feed type (pH, salt content), CPG matrix and sample pretreatment (RNase A, isopropanol precipitation). Water was chosen as the adsorption buffer over MgCl(2) solutions since it maximised pDNA yield (96.2±4.9%) and protein removal (61.3±3.0%), while providing for a substantial removal of RNA (65.5±3.5%) and gDNA (44.7±14.1%). Although the use of pH 3.5 maximised removal of impurities (~75%), the best compromise between plasmid yield (~96%) and RNA clearance (~60-70%) was obtained for a pH of 5.2. Plasmid yield was maximal (>96%) when the concentration of acetate and potassium ions in the incoming lysate feed were 1.7 M and 1.0 M, respectively. The pre-treatment of lysates with RNase A deteriorated the performance since the resulting oligoribonucleotides lack the cis-diol group at their 3' termini. Overall, the results support the idea that charge transfer interactions between the boron atom at acidic pH and electron donor groups in the aromatic bases of nucleic acids and side residues of proteins are responsible for the non-specific removal of gDNA, RNA and proteins., (Copyright © 2011 Elsevier B.V. All rights reserved.)

In this work, we systematically evaluated the potential of using boronic acid functionalized magnetic particles in the capturing of human immunoglobulin G under typical mammalian cell culture conditions. For comparison, Protein A coated magnetic particles were also used. The binding pH was found to significantly influence the adsorption isotherms of boronic acid particles with the higher capacities (0.216 g IgG/g support) being observed at pH 7.4. Comparatively, this value was 0.109 g IgG/g support, for Protein A particles under the same conditions. Both particles revealed very fast adsorption kinetics with more than 70% of the maximum binding capacity being achieved in a few seconds. The effect of glucose and lactate, which are known to interact with boronic acid, was evaluated. For glucose, the binding capacity was significantly influenced by the pH and decreased as pH increased. At pH 9.5, a 70% lower binding capacity was observed for glucose concentrations as low as 0.5 g/l. The effect of lactate was less pronounced and almost pH independent reaching at most 20% decrease in binding capacity. Nevertheless, the effect of both molecules was always lower at pH 7.4. The optimization of the elution conditions enabled complete recovery of bound IgG from boronic acid particles using 50mM Tris-HCl, 200 mM sorbitol, 200 mM NaCl at pH 8.5., (Copyright © 2011 Elsevier B.V. All rights reserved.)

In this work, we investigated the feasibility of using phenyl boronate (PB) chromatography for the direct capture of monoclonal antibodies from a CHO cell supernatant. Preliminary results, using pure protein solutions have shown that PB media can bind to human antibodies, not only at strong alkaline conditions but also at acidic pH values. In fact, antibodies have been found to bind in the pH range 5.5-8.5. On the other hand, insulin and human serum albumin did not bind at alkaline pH but at lower pH, which reflects the importance of non-specific interactions with the matrix. Different binding and eluting buffers were evaluated for the capture of immunoglobulin G (IgG) from a CHO cell supernatant and the most promising results were obtained using 20 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid at pH 8.5 as binding buffer and 1.5 M Tris-HCl as eluting buffer. Using a step elution, all IgG was recovered in the elution pool with a maximum purification factor of 56. A gradient elution allowed a further increase of the final purity, yet achieving a slightly lower yield. IgG recovery was around 85% and the purification factor was 76. The highest purity was obtained when the pH of the cell supernatant feed was previously adjusted to 8.5. Starting from an initial protein purity of 1.1% and high-performance liquid chromatography (HPLC) purity of 2.2%, after PB adsorption, a final protein purity of 85% and a HPLC purity of 88% was achieved., (Copyright © 2010 John Wiley & Sons, Ltd.)