Search

A rapid and sensitive method for the quantitative detection of busulfan (BU) in children's hemolytic samples by HPLC-tandem mass spectrometry (MS/MS) was established. In this study, the sample preparation procedure involved a one-step protein precipitation with acetonitrile (ACN) solution, and the HPLC-MS/MS method used Hypersil GOLD C 18 . The mobile phase consisted of 10 mM ammonium acetate solution (containing 0.1% formic acid) and ACN with a flow rate of 0.4 mL/min. Multiple reaction monitoring modes were used for quantitative analysis and the ion pairs of BU and BU-d8 were m/z 263.9 → 150.9 and 272.0 → 159.0, respectively. BU had a good linearity in the range of 0.01-10 μg mL -1 . The intra- and inter-day relative error was between -7.21% and 8.26%, and the coefficient of variation was less than 12.64%. The average extraction recovery rate in plasma samples was 99.76% ± 6.53%, and the matrix in normal plasma and hemolyzed plasma had no significant effect on the detection results. Normal and hemolytic samples could maintain good stability at 4, 25 and -40°C. As a result, this method is particularly suitable for determining BU in hemolytic samples from children with hematopoietic stem cell transplantation (HSCT), and this study provides the methodological basis for further research on the pharmacokinetics of BU in children with HSCT., (© 2020 John Wiley & Sons, Ltd.)

Busulfan (Bu) is an alkylating agent commonly used in preparative regimens for hematologic malignant and non-malignant patients undergoing hematopoietic stem cell transplantation (HSCT). The objective of the present study was to develop an UPLC-MS/MS method for quantification of Bu in human plasma. A total of 55 patients with hematologic malignancies (n = 34) and non- malignancies (n = 21) received myeloablative Bu therapy prior to HSCT. A tandem mass spectrometric method was developed and validated to quantify Bu levels in these patients. The method was fully validated over the concentration range of 25-2000 ng/mL (r > 0.99). The assay method demonstrated good precision and accuracy. Stability studies indicated that the drug was stable in various conditions. Incurred sample reanalysis findings were within acceptable ranges (<15% of the nominal concentration). Based on the 1 st dose AUC results, one third of hematologic malignant patients and half of non-malignant patients needed dose adjustment. However, in subsequent doses (5 th , 9 th , and 13 th ), 77%, 82% and 82%, respectively, of hematologic malignant patients and 71%, 67% and 86%, respectively, of non-malignant patients achieved the target range of Bu AUC. The suitability of the developed method for routine TDM of Bu in HSCT patients was demonstrated. The study suggests that the pharmacokinetic profile of Bu varies in both groups.

Bone marrow transplantation is used to treat particular types of cancers such as lymphoma, leukemia, and multiple myeloma. Appropriate dosing of busulfan during the preparative phase is critical for a successful allograft; if blood concentrations get too high significant liver toxicity can occur, if blood concentrations are too low, then graft-versus-host disease (GVHD) can develop. Busulfan monitoring in blood allows hospitals with the opportunity to provide individualized medicine to patients and improve overall patient outcome. Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) is an important analytical method for quantification of busulfan in plasma in order to optimize the dose. © 2020 Wiley Periodicals LLC. Basic Protocol: Analysis of busulfan by liquid chromatography/mass spectrometry., (© 2020 Wiley Periodicals LLC.)

Background: Busulfan (Bu) is an alkylating agent used as part of the conditioning regimen in pediatric patients before hematopoietic stem cell transplantation. Despite intravenous (IV) administration and dosing recommendations based on age and weight, reports have revealed interindividual variability in Bu pharmacokinetics and the outcomes of hematopoietic stem cell transplantation. In this context, adjusting doses to Bu's narrow therapeutic window is advised. We aimed to assess the utility of therapeutic drug monitoring (TDM) of Bu in children, the reliability of Bu quantification methods, and its stability in plasma when stored for up to 5 years., Methods: Eighteen patients from our TDM center (252 samples) were included. All of them received a 2-hour Bu IV infusion 4 times daily for a total of 16 doses. The first dose of Bu was age/weight-based, and the subsequent doses were adjusted from third or fifth dose onward based on the estimated first dose pharmacokinetic parameters to target steady-state concentrations (Css) of 600-900 ng/mL. The performance of our unit's high-performance liquid chromatography with tandem mass spectrometry method was assessed using a quality control (QC, 35 series) chart. International, multicenter, cross-validation test (n = 21) was conducted to validate different analytical methods. To assess Bu stability, regression analyses and Bland-Altman plots were performed on measurements at repeated time points on samples stored at -80°C for up to 5 years., Results: We observed a 4.2-fold interindividual variability in Bu Css after the first dose, with only 28% of children having a Css within the target range. During the 4 days of conditioning, 83% of children had their doses modified according to TDM recommendations. This achieved a Css within the target range in 75% of the children. Routine QC measurements were generally within the ±15% range around theoretical values, showing the optimal robustness of our center's analytical method. Two of the 21 Bu TDM centers returned inadequate results during cross-validation testing; both used a UV detection method. Storage at -80°C led to a fall in Bu content of 14.9% ± 13.4% at 2-4 years and of 20% ± 5% by 5 years (roverall = 0.92)., Conclusions: We conclude that TDM is an effective method of achieving targeted Bu levels in children. QC programs are crucial to monitoring and maintaining the quality of an analytical method.

Treosulfan (l-threitol-1,4-di-methanesulfonate) is a prodrug of a bifunctional alkylating agent that is being used increasingly in pediatric bone marrow transplantation regimens. The activation pathway is a complex reaction, which consists of two consecutive reactions leading to epoxybutane derivatives which are responsible for DNA alkylation. A simple, sensitive high performance liquid chromatography method for the determination of the sum of treosulfan and its epoxy metabolites by UV detection after derivatization with sodium diethyldithiocarbamate in human plasma was developed and validated. Plasma samples containing treosulfan and epoxy metabolites were converted into thiocarbamate derivative with 10% sodium diethyldithiocarbamate. Dinitrobiphenyl was used as an internal standard. The analysis was carried out using a reversed phase C18 column with a mobile phase consisting of methanol-water (65:35, v/v) at a flow rate of 1 mL/min. The eluent was monitored at 254 nm. The standard calibration curve was established between 2.5 and 50 µg/mL, with a correlation coefficient of 0.9987. Intra- and interday precision and accuracy of the method was <8% and met the analytical criteria. Pharmacokinetic parameters were determined in six children who received intravenous treosulfan (dose range 12-24 g/m(2)) in combination with fludarabine prior to blood or marrow transplantation., (© The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Busulfan is an alkylating agent widely used in the ablation of bone marrow cells before hematopoietic stem cell transplant. Due to large intraindividual and interindividual variations, and narrow therapeutic window, therapeutic drug monitoring of busulfan is warranted. A quick and reliable HPLC-MS/MS method was developed for the assay of plasma busulfan. HPLC involved C18 column, and MS/MS was used in electrospray ionization (ESI) positive mode. Quantitation and identification of busulfan was made using various multiple reactions monitoring (MRMs). Isotopic labeled busulfan-d8 was used as the internal standard. The method is linear from 50 to 2500 ng/mL and has with-in run and between-run imprecision of <10 %.

Background: Busulfan, an alkylating agent administered prior to hematopoietic stem cell transplantation, has a narrow therapeutic range and wide variability in metabolism. We developed a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for rapid and accurate quantification of plasma busulfan., Methods: Busulfan was separated and detected using an LC system containing a C18 column equipped with MS/MS. The sample was eluted with a mobile phase gradient for a total run time of 10 min. Plasma busulfan concentration was quantified against a 6-point standard curve in a multiple reaction monitoring mode at mass-to-charge (m/z) 264.1 > 151.1. Precision, recovery, matrix effect, linearity, detection capability, carryover, and stability were evaluated. The range of plasma busulfan concentration was obtained by analyzing samples from 9 children receiving busulfan., Results: The coefficients of variation of within-run and within-laboratory precision were all below 5%. Recoveries were all within the range of 100-105%. Linearity was verified from 0 to 5,000 ng/mL. Limit of detection and limit of quantification were 1.56 and 25 ng/mL, respectively. Carryover rate was within allowable limits. Plasma busulfan concentration was stable for 2 weeks at -20℃ and -80℃, but decreased by 25% when the plasma was stored for 24 hr at room temperature, and by <5% in 24 hr at 4℃. The plasma busulfan concentrations were between 347 ng/mL and 5,076 ng/mL., Conclusions: Our method using LC-MS/MS enables highly accurate, reproducible, and rapid busulfan monitoring with minimal sample preparation. The method may also enable safe and proper dosage.

Rationale: Busulfan (Bu) is an important component of the myeloablative conditioning regimen prior to hematopoietic stem cell transplantation (HSCT) especially in children. Intravenously administered Bu exhibits a therapeutic window phenomenon requiring therapeutic drug monitoring. Analytical methods developed for Bu routine monitoring were aimed at using low volumes of biological fluids and development of simple procedures to facilitate the dosage adjustment. In this report, we describe a simple, rapid method for Bu measurement using dried blood spots (DBS) from only 5 μL of whole blood., Methods: Bu extracted from DBS with methanol was measured by high-performance liquid chromatography with electrospray ionization and tandem mass spectrometry in multiple reaction monitoring mode using D8-Bu as an internal standard. The method was in-house validated evaluating trueness, repeatability, within-laboratory reproducibility, specificity and the lower limit of quantification (LLOQ)., Results: The method was linear in the calibration range of 100-2000 ng mL(-1) (r(2)>0.99) encompassing the therapeutic concentrations of Bu. A good trueness (<14%), precision (<10%), and recovery (100%) were observed during validation of the method with quality controls of 300, 600 and 1400 ng mL(-1). The LLOQ was determined as 50 ng mL(-1) and no matrix or carryover effects were observed. The validated method was applied to measure Bu levels in four children receiving infusion of Bu prior to HSCT. A good correlation was observed between the Bu levels measured by DBS and dried plasma spot (DPS) (r(2) =0.96) and between DPS and the GC/MS method (r(2) =0.92). Bu was found to be stable in DBS up to 6 h at room temperature and for 24 h at 4 °C., Conclusions: The new DBS method facilitates earlier dosage adjustment during Bu therapy by its specific and simple procedure using 5 μL of whole blood., (Copyright © 2012 John Wiley & Sons, Ltd.)

Clinical trials demonstrated treosulfan (TREO) as a promising myeloablative agent prior to hematopoietic stem cell transplantation (HSCT). TREO is a specific pro-drug from which biologically active mono- (S,S-EBDM) and diepoxybutane (S,S-DEB) derivatives are formed in vitro or in vivo by a non-enzymatic pH and temperature-dependent intramolecular nucleophilic substitution. Following extraction of the plasma samples with a mixture of dichloromethane and acetonitrile, S,S-EBDM and S,S-DEB were derivatized with 3-nitrobenzenesulfonic acid (3-NBS) to UV-absorbing esters. Optimal temperature and time of derivatization as well as extraction method and also the effect of pH on TREO stability in plasma were established. Identity of the synthesized derivatives was confirmed by mass spectrometry. The post-derivatization mixture was purified from the excess of unreacted 3-NBS by extraction with water. The derivatization products and 2,2'-dinitrobiphenyl (internal standard) were separated on Nucleosil 100 C18 column using a mobile phase consisted of acetonitrile and water. The developed method was validated and demonstrated adequate accuracy and precision. Limit of quantification for both S,S-EBDM and S,S-DEB amounted to 2.5 μM. The method was applied in clinical conditions to quantify the levels of TREO activation products in plasma of children undergoing HSCT. The methodology for simultaneous determination of TREO epoxy-transformers in human plasma is described for the first time., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Busulfan is a chemotherapy drug widely used as part of conditioning regimens for patients undergoing bone marrow transplantation (BMT). Challenges of busulfan treatment include a narrow therapeutic window and wide inter- and intra-patient variability. Inappropriately low drug levels lead to relapse and even graft rejection, while higher doses frequently have toxic and sometimes fatal consequences. Maintenance of plasma busulfan concentrations using repeated measurements and proper adjustment of dosage can reduce busulfan-related toxicity and improve treatment outcomes. We describe a rapid (2-minute total analysis time per sample) and simple method for accurate and precise busulfan concentration determination in plasma samples (100 microL) using high performance liquid chromatography combined with electrospray positive ionization tandem mass spectrometry (HPLC-ESI-MS/MS). Busulfan is isolated from plasma after internal standard (busulfan-D(8))-methanol extraction, dilution with mobile phase (ammonium acetate-formic acid-water), and centrifugation. The supernatant plasma is injected onto the HPLC-ESI-MS/MS and quantified using a six-point standard curve. The assay is linear from 0.025 microg/mL (approximately 0.1 micromol/L) to at least 6.2 microg/mL (approximately 25 micromol/L) with precisions of <5% over the entire range.

A direct and selective HPLC method with refractometric detection was worked out for determination of treosulfan in plasma and urine of children. Before injection onto reverse phase column plasma samples with treosulfan and barbital (I.S.) were clarified using filtration. The mobile phase was composed of phosphate buffer, pH 5 and acetonitrile. The linear range of the standard curve of treosulfan spanned concentrations of 10.0-2000.0 microg/ml and 50.0-10000.0 microg/ml in plasma and urine, respectively, and covered the levels found in biological fluids after infusion of the drug. The limit of detection amounted to 5 microg/ml for plasma and 25 microg/ml for urine. Intra- and inter-day precision and accuracy of the measurement fulfilled analytical criteria accepted in pharmacokinetic studies. Recovery of treosulfan as well as stability in biological fluids was also calculated. The validated method was successfully applied in pharmacokinetic studies of treosulfan administered to children prior to haematopoietic stem cell transplantation. Differences between pharmacokinetics of treosulfan in children and adults were also studied.

A sensitive and specific assay for detection of busulfan in human plasma was developed. The assay is based on rapid isolation of busulfan by liquid-liquid extraction with ethyl acetate, and detection by high-performance liquid chromatography with electrospray ionization and tandem mass spectrometry. 1,6-Bis(methanesulfonyloxy)hexane, a synthesized analogue of busulfan, was used as the internal standard (IS). The acquisition was performed in the multiple reaction monitoring mode; busulfan and the IS were detected with no interferences from plasma matrix. The method was linear over the range 5-2500 ng mL(-1), with r2 > 0.99 and a run time of only 3.5 min. The intra- and inter-assay precisions were in the ranges 2.1-11.9% and 3.2-10.1%, respectively, and the intra- and inter-assay accuracies were 92.2-107.6% and 94.7-104.1%, respectively. The absolute recoveries were 82.0% (20 ng mL(-1)), 90.6% (1000 ng mL(-1)) and 80.0% (2000 ng mL(-1)) for busulfan, and 89.1% for the IS (1000 ng mL(-1)). The limits of detection and quantification were 2 and 5 ng mL(-1), respectively. The validated method was successfully applied to analyze plasma samples obtained from six adults receiving doses of 1 mg kg(-1) in a conditioning regimen prior to bone marrow transplantation. A marked intra-patient variation in busulfan concentrations during the steady state was observed, which limits the application of pharmacokinetic modeling and suggests that continuous therapeutic monitoring is necessary for adequate individualized dosing. In this regard, the present assay brings important advantages relative to other methods described in the literature, i.e., it is highly specific and simple to perform, with a rapid chromatographic run time (3.5 min), and the whole procedure can be completed in 4-5 h, which would permit dose corrections after the third dose allowing earlier and better dosing adjustments towards the target level of busulfan., (Copyright 2005 John Wiley & Sons, Ltd.)

Optimisation of busulfan dosage in patients undergoing bone marrow transplantation is recommended in order to reduce toxic effects associated with high drug exposure. A new method was developed coupling liquid chromatography with mass spectrometry (LC-MS) and was validated for the determination of busulfan concentrations in plasma. Recovery was 86.7%, the limit of detection was 2.5 ng/ml and linearity ranged from 5 to 2500 ng/ml. The correlation between the busulfan concentrations measured by our previously published HPLC-UV method and the new HPLC-MS method was highly significant (P<0.0001). Sample volume was reduced and the method was rapid, sensitive and less expensive than the methods previously used in our laboratory. This method was used to determine the pharmacokinetic parameters of busulfan after the first administration of 1 mg/kg orally, in 13 children receiving the drug as part of the preparative regimen for bone marrow transplantation. Our results were similar to previously reported data. They showed that the apparent oral clearance of busulfan was 0.299+/-0.08 l/h/kg, and that it was significantly higher (P=0.02) in patients below the age of 5 years than in older children.

A reversed-phase liquid chromatographic method with ultraviolet detection has been developed to determine busulfan concentrations in plasma of children undergoing bone marrow transplantation. Plasma samples (200 microl) containing busulfan and 1,6-bis(methanesulfonyloxy)hexane as an internal standard were prepared by a simple derivatization method with diethyldithiocarbamate followed by extraction with ethyl acetate and solid-phase purification on C8 columns conditioned with methanol and water and eluted with acetonitrile (recovery 99%). Chromatography was accomplished using a Hypersil octadecylsilyl column (10 cm x 4.6 mm I.D.) and a mobile phase of acetonitrile, tetrahydrofuran and distilled water (65:5:30, v/v). The limit of detection was 25 ng/ml (signal-to-noise ratio of 5). Calibration curves were linear up to 25,000 ng/ml. Intra-day and inter-day coefficients of variation of the assay were < or =5%. This method was used to analyse busulfan plasma concentrations after oral administration within the framework of therapeutic drug monitoring and pharmacokinetic studies in children.

A rapid, sensitive and reproducible high-performance liquid chromatographic assay for busulfan in human plasma was developed. After extraction of plasma samples with acetonitrile and methylene chloride, busulfan and the internal standard [1,5-bis(methanesulfonyloxy)pentane] were derivatized with 8-mercaptoquinoline to yield fluorescent compounds which were detected with a fluorescence detector equipped with filters of 360 nm (excitation) and 425 nm (emission). Calibration graphs showed a linear correlation (r>0.9990) over the concentration range of 20-2000 ng/ml. The recovery of busulfan from plasma standards was 70+/-5%. The detection and quantification limits for busulfan in plasma samples were established at 9 ng/ml and 20 ng/ml, respectively. The intra- and inter-assay variations were lower than 8% and 10%, respectively. The applicability of the method was verified by analyzing the plasma concentrations of busulfan in a patient to whom it was administered orally on two different days.

A high-performance liquid chromatographic (HPLC) method was developed and validated for the determination of busulfan in plasma. Busulfan was extracted in toluene, derivatized by 2,3,5,6-tetrafluorothiophenol to obtain di-TFTP-butane, the derivatization product was then re-extracted in toluene and injected into the HPLC system with ultraviolet detection (wavelength: 275 nm). Recovery from extraction was 80%, the limit of quantification was 50 ng/ml and linearity ranged from 50 to 2000 ng/ml. In addition, forty-two samples obtained from pediatric patients treated with busulfan were analyzed by the HPLC and GC-MS assays based on the same derivatization procedure. The correlation between the di-TFTP-butane concentrations was highly significant (p<0.0001), demonstrating that the two methods were in good agreement.

A sensitive, specific and stability-indicating high-performance liquid chromatographic (HPLC) assay, involving pre-column derivatization and solid-phase extraction (SPE), was developed and validated for the quantitation of busulfan (BU) in aqueous and plasma samples. The linearity of the assay was in the concentration ranges of 0.15-10 microg/ml and 0.15-3 microg/ml for aqueous and plasma samples, respectively. The within-day and between-day variations were 2.90 and 3.31%, respectively, for the aqueous samples, and 9.24 and 14.56%, respectively, for the plasma samples. The overall recovery, derivatization yield and SPE efficiency of BU from plasma samples were 82.03, 108.01 and 86.69%, respectively. Forced degraded samples, either in highly acidic, neutral or basic medium, produced no interfering peaks in the chromatogram. The reported assay requires only 0.2 ml of plasma for the analysis, and its sensitivity is 150 ng/ml by monitoring samples at a wavelength of 254 nm, sufficient to study the plasma pharmacokinetics of BU in rats after a clinically relevant oral dose. Moreover, the sensitivity of the assay can be significantly increased to 30 ng/ml by monitoring samples at a wavelength of 278 nm. The applications of the assay were demonstrated with BU solubility measurements in two aqueous systems and with plasma samples from a Sprague-Dawley rat for an in vivo pharmacokinetic study. In addition, the assay has been employed in the development of a patented intravenous formulation, and in evaluations of stability, preclinical pharmacokinetics in rats and dogs, and clinical phase I trial of the formulation. The assay is readily adaptable to clinical therapeutic drug monitoring.

The development and validation of a high-performance liquid chromatographic (HPLC) assay for determination of busulfan concentrations in human plasma for pharmacokinetic studies is described. Plasma samples containing busulfan and 1,6-bis(methanesulfonyloxy)hexane, and internal standard, were prepared by derivatization with sodium diethyldithiocarbamate (DDTC) followed by addition of methanol and extraction with ethyl acetate. The extract was dried under nitrogen and the samples reconstituted with 100 microl of methanol prior to HPLC determination. Chromatography was accomplished using a Waters NovaPak octadecylsilyl (ODS) (150 x 3.9 mm I.D.) analytical column, NovaPak ODS guard column, and mobile phase of methanol-water (80:20, v/v) at a flow-rate of 0.8 ml/min with UV detection at 251 nm. The limit of detection was 0.0200 microg/ml (signal-to-noise ratio of 6) with a limit of quantitation (LOQ) of 0.0600 microg/ml for busulfan in plasma. Calibration curves were linear from 0.0600 to 3.00 microg/ml in plasma (500 microl) using a 1/y weighting scheme. Precision of the assay, as represented by C.V. of the observed peak area ratio values, ranged from 4.41 to 13.5% (13.5% at LOQ). No day-to-day variability was observed in predicted concentration values and the bias was low for all concentrations evaluated (bias: 0 to 4.76%; LOQ: 2.91%). The mean derivatization and extraction yield observed for busulfan in plasma at 0.200, 1.20 and 2.00 microg/ml was 98.5% (range 93.4 to 107%). Plasma samples containing potential busulfan metabolites and co-administered drugs, which may be present in clinical samples, provided no response indicating this assay procedure is selective for busulfan. This method was used to analyze plasma concentrations following administration of a 1 mg/kg oral busulfan dose.

A liquid chromatographic-mass spectrometric method has been developed to determine busulfan concentrations in the cerebrospinal fluid and serum of some children undergoing bone marrow autotransplantation. After two liquid-liquid extraction steps with dichloromethane on a biological matrix, the separation of busulfan was carried out by isocratic reversed-phase chromatography. The mass spectrometric system was operated in electron-impact mode. Principal ions at m/z 175, 111 and 79 were observed for busulfan, but only m/z 175 was chosen for the quantification of the analyte. The retention time of busulfan was 2.5 min. The detection limit of 100 ng/ml allowed the determination of cerebrospinal fluid and serum busulfan concentrations during the four days of high-dose (1 mg/kg) treatment prior to autotransplantation in five child patients.