Search

Background: Neer type IIB lateral clavicle fractures are inherently unstable fractures with associated disruption of the coracoclavicular (CC) ligaments. Because of the high rate of nonunion and malunion, surgical fixation is recommended; however, no consensus has been reached regarding the optimal fixation method. A new plating technique using a superior lateral locking plate with anteroposterior (AP) locking screws, resulting in orthogonal fixation in the lateral fragment, has been designed to enhance stability and reduce implant failure. The purpose of this study was to biomechanically compare 3 different clavicle plating constructs within a fresh frozen human cadaveric shoulder model., Methods: Twenty-four fresh frozen cadaveric shoulders were randomized into 3 groups (n = 8 specimens): group 1, lateral locking plate only (Medartis Aptus Superior Lateral Plate); group 2, lateral locking plate with CC stabilization (No. 2 FiberWire); and group 3, lateral locking plate with 2 AP locking screws stabilizing the lateral fragment. All specimens were subject to cyclic loading of 70 N for 500 cycles. Data were analyzed for gap formation after cyclic loading, construct stiffness, and ultimate load to failure, defined by a marked decrease in the load displacement curve., Results: After 500 cycles, there was no statistically significant difference between the 3 groups in gap formation (P = .179). No specimen (0/24) failed during cyclic loading. Ultimate load to failure was significantly higher in group 3 compared to group 1 (286 N vs. 167 N; P = .022), but not to group 2 (286 N vs. 246 N; P = .604). There were no statistically significant differences in stiffness (group 1: 504 N/mm; group 2: 564 N/mm; group 3: 512 N/mm; P = .712). Peri-implant fracture was the primary mode of failure for all 3 groups, with group 3 demonstrating the lowest rate of peri-implant fractures (group 1: 6/8; group 2: 7/8; group 3: 4/8; P = .243)., Conclusion: Biomechanical evaluation of the clavicle plating techniques showed effective fixation across all specimens at 500 cycles. The lateral locking plate with orthogonal AP locking screw fixation in the lateral fragment demonstrated the greatest ultimate failure load, followed by the lateral locking plate with CC stabilization. This new plating technique showed compatible stiffness and gap formation when compared to conventional lateral locking plates as well as plates with CC fixation. The use of orthogonal screw fixation in the distal fragment may negate against the need for CC stabilization in these types of fractures, thus minimizing surgical dissection around the coracoid and potential complications., (Copyright © 2022 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Purpose: Neer type II distal clavicle fractures are associated with a high rate of non-union or malunion due to impaired coracoclavicular ligament stability. The purpose of this study was to assess the clinical and radiological outcomes of arthroscopically assisted indirect osteosynthesis for type II distal clavicle fractures using a cortical suture button device., Methods: Seventeen patients Neer type II fractures of the distal clavicle were treated surgically using cortical suture button fixation between 2012 and 2017. The clinical and radiological results were assessed using the American Shoulder and Elbow Surgeons Shoulder Score (ASES), Constant-Murley score and visual analogue scale (VAS) score., Results: Anatomic reduction and bone healing were achieved in all patients at the final follow-up. The median age of the patients was 31 years (range 19-57). The mean follow-up was 25.9 months (range 14-64). The average delay before surgery was 2 days (range 1-4). At the final follow-up, the mean ASES, Constant-Murley score and VAS score were 92.6 ± 3.2 (range 84.9-96.6), 96.2 ± 2.4 (range 92-100) and 0.47 ± 0.51 (range 0-1), respectively. All patients were able to resume work as well as sport activities. The postoperative complications included two coracoid process fractures, and none of the patients required additional surgery related to the index procedure., Conclusion: All arthroscopic coracoclavicular button fixation of Neer type II distal clavicle fractures would provide sufficient stability and union with satisfactory radiological and clinical outcomes. This arthroscopic fixation technique would be more efficient than other osteosynthesis methods because it is a minimally invasive surgery with a low complication rate., Level of Evidence: III.

Purpose: Despite the high failure rates of techniques used to maintain the reduction of single-tunnel coracoclavicular (CC) fixation, analyses of the etiology of loss of reduction related to surgical techniques are limited. Therefore, it was hypothesized that the initial coracoclavicular tunnel angle was related to loss of reduction in the single-tunnel technique for AC joint dislocation. This study aimed to evaluate the clinical and radiological outcomes of arthroscopic single-tunnel CC suture button fixation according to the initial coracoclavicular tunnel angle., Methods: Thirty-two consecutive patients who underwent arthroscopic single-tunnel CC suture button fixation for AC joint dislocation from 2014 to 2018 were enrolled. The tunneling-first technique was used in the first 11 patients, while the reduction-first technique was used in the remaining 22 consecutive patients. For clinical assessments, the American Shoulder and Elbow Surgeons (ASES) score and Korean Shoulder Score (KSS) were recorded. For radiological evaluation, coracoclavicular distance ratio, coracoclavicular tunnel angle, coracoid, and clavicular tunnel widths were measured., Results: The ASES score did not differ significantly between the two groups (n.s.). However, the KSS was significantly better in the reduction-first group (p = 0.031). No significant intergroup differences were observed in the pre- and postoperative coracoclavicular distance ratio. However, at the last follow-up, loss of coracoclavicular distance ratio was significantly smaller in the reduction-first group (p < 0.001). At the final follow-up, loss of the coracoclavicular distance ratio was positively correlated with the postoperative coracoclavicular tunnel angle (p < 0.001, Spearman's rho correlation coefficient = 0.602). The final follow-up clavicular tunnel width was also significantly smaller in the reduction-first group (p = 0.002). Finally, the last follow-up clavicular tunnel width was positively correlated with the postoperative coracoclavicular tunnel angle (p = 0.008, Spearman's rho correlation coefficient = 0.459)., Conclusion: The reduction-first technique showed better clinical and radiological outcomes than the tunneling-first technique in single-tunnel CC fixation for AC joint dislocation. A large postoperative coracoclavicular tunnel angle was associated with loss of reduction and clavicular tunnel widening. Therefore, obtaining a straight coracoclavicular tunnel angle is crucial for achieving better outcomes and minimizing loss of reduction., Level of Evidence: III.

Background: Arthroscopic stabilization of torn coracoclavicular (CC) ligaments gained popularity recently. However, loss of reduction after the operation and complications unique to this technique involving tunnel placement through the distal clavicle and coracoid process are concerns. The purpose of this study was to report intraoperative and early postoperative complications associated with this procedure., Methods: This study retrospectively evaluated 18 consecutive patients who had undergone arthroscopic stabilization for torn CC ligaments between 2014 and 2015. The indications for surgery were acute or chronic acromioclavicular dislocation and acute fracture of the distal clavicle, associated with CC ligament disruption. Clinical outcomes were evaluated with the American Shoulder and Elbow Surgeons (ASES) and the University of California, Los Angeles (UCLA) scores. Intra- and postoperative complications and reoperations were investigated., Results: There were six female and 12 male patients with a mean age of 47 years (range, 22 to 86 years). At a mean follow-up of 17 ± 10 months (range, 10 to 28 months), the mean ASES score was 88.8 ± 19.9 and the mean UCLA score was 30.9 ± 5.2. Intraoperatively, seven complications developed: breach of lateral cortex of the coracoid process in five patients, medial cortex of the coracoid process in one, and anterior cortex of the clavicle in one. Postoperative complications developed in eight patients: four ossifications of the CC interspace, four tunnel widening of the clavicle, one bony erosion on the clavicle, and one superficial infection. A loss of reduction was found in six patients. Reoperation was performed in three patients for loss of reduction in two and superficial infection in the other., Conclusions: Arthroscopic CC stabilization resulted in high rates of intraoperative and early postoperative complications. Most of them were related to the surgical technique involving bone tunnel placement in the coracoid process and the clavicle., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported.

Background: An anatomic double-tunnel (DT) reconstruction technique has been widely adopted to reconstruct the ruptured coracoclavicular (CC) ligaments seen with high-grade acromioclavicular (AC) joint injuries. However, the anatomic DT reconstruction has been associated with the risk of clavicle fractures, which may be problematic, particularly for contact athletes. Purpose/Hypothesis: The purpose was to compare a single-tunnel (ST) CC ligament reconstruction for AC joint injuries with the native state as well as with the more established anatomic DT CC ligament reconstruction. The hypothesis was that ST CC ligament reconstruction would demonstrate biomechanical properties similar to those of the native state and the DT CC ligament reconstruction. Study Design: Controlled laboratory study. Methods: Eighteen fresh-frozen human cadaveric shoulders (9 matched pairs) with mean ± SD age of 55.5 ± 8.5 years underwent biomechanical testing. One specimen of each matched pair underwent a ST CC ligament reconstruction and the second, a DT CC ligament reconstruction. The ST and DT CC ligament reconstruction techniques involved a 5-mm distal clavicle excision, avoided coracoid drilling, and utilized a 3.0-mm suture anchor to fix the excess lateral limb to reconstruct the superior AC joint capsule. The ST CC ligament reconstruction technique additionally included a 1.3-mm suture tape to help avoid a sawing effect, as well as a dog-bone button over the clavicular tunnel to increase stability of the construct. All specimens were tested to 70 N in 3 directions (superior, anterior, and posterior) in the intact and reconstructed states. The ultimate load, yield load, stiffness, and mode of failure of the reconstructed specimens were tested. Results: There were no significant differences in translation at 70 N in the superior (P = .31), anterior (P = .56), and posterior (P = .35) directions between the ST CC ligament reconstruction and the intact state. The ultimate load to failure, yield load, and stiffness in the ST and DT groups were also not significantly different. There were no distal clavicle fractures in load-to-failure testing in the ST or DT group. Conclusion: In this biomechanical study, ST CC ligament reconstruction demonstrates biomechanical properties comparable to the intact state. Additionally, use of the ST CC ligament reconstruction shows biomechanical properties similar to the DT CC ligament reconstruction technique while theoretically posing less risk of clavicle fracture. Clinical Relevance: This study suggests that the ST CC ligament reconstruction has biomechanical properties equivalent to the DT CC ligament reconstruction with less theoretical risk of clavicle fracture. [ABSTRACT FROM AUTHOR]

Purpose: Recently, many acromioclavicular-coracoclavicular (AC-CC) ligament reconstruction techniques address only the CC ligament. However, many of these techniques are costly, time-consuming, and require the use of allogenic grafts, making them prone to creep and failure or novel devices making them challenging for orthopaedic surgeons. The purpose of this study was to compare the biomechanical characteristics of a double endobutton technique using a standard endobutton CL with those of a coracoid cerclage sling (CS) for reconstruction of the CC ligaments.Methods: Anterior-posterior (AP) translation and superior-inferior (SI) translation were quantified for eight matched pairs of intact AC joints. One shoulder from each pair underwent a double endobutton repair, using an endobutton CL modified with an additional endobutton (Smith & Nephew, Memphis, Tenn) and placed through holes in the coracoid and clavicle. The contra-lateral shoulder received a coracoid sling reconstruction using an anterior tibialis tendon. Translation testing was repeated after reconstruction, followed by load-to-failure testing. Paired t tests were used for statistical analysis.Results: The CS technique demonstrated a greater SI and AP translation than the double endobutton technique (p < 0.05). Additionally, the double endobutton technique had a greater stiffness (40.2 ± 11.0 vs. 20.3 ± 6.4 N/mm, p = 0.005), yield load (168.5 ± 11.0 vs. 86.8 ± 22.9 N, p = 0.002), and ultimate load (504.4 ± 199.7 vs. 213.2 ± 103.4 N, p = 0.026) when compared to the CS technique.Conclusion: The double endobutton technique yielded less translation about the AC joint and displayed stronger load-to-failure characteristics than the CS reconstruction. As such, this technique may be better suited to restore native AC-CC biomechanics, reduce post-operative pain, and prevent recurrent subluxation and dislocation than an allogenic graft construct. The double endobutton technique may be a suitable option for addressing AC-CC injuries. [ABSTRACT FROM AUTHOR]

Purpose: A novel radiation-free electromagnetic navigation system (ENS)-based method was developed, and its feasibility and accuracy for transclavicular-transcoracoid drilling procedures were evaluated in an experimental setting. Methods: Sixteen arthroscopically assisted electromagnetic navigated transcoracoid-transclavicular drilling procedures with subsequent TightRope device implantation were performed on eight human cadavers. Post-operative fluoroscopy and CT-scan analysis were acquired to determine tunnel placement accuracy. Optimal tunnel placement was defined as both the coracoid entry and exit point of the tunnel localized in the centre position of the coracoid base without cortical breach or fracture. Results: Successful tunnel placement was accomplished in all 16 cases. The mean overall operation time was 30.3 ± 5.0 min. Regarding the coracoid exit point, 15 of 16 tunnels (93.8 %) were localized in the desired base-centre position. During the navigated drilling procedure, no misguidance of the drill requiring directional readjustments or restarts occurred. No cortical breach, no fractures and no complications occurred. Conclusions: The electromagnetically navigated transcoracoid-transclavicular drilling procedure used in this study demonstrated high targeting accuracy, required no intraoperative radiographs, was associated with no complications and provided user-friendliness. [ABSTRACT FROM AUTHOR]

Abstract: Distal clavicle fracture accompanied by coracoid process one is a rare injury. Surgical and/or conservative treatments are proposed. We report the case of a 49-year-old woman presenting a distal clavicle fracture associated with a coracoid process one due to a fall on the left shoulder. Both injuries are treated surgically. Per operatively, and through an anterior “strap” approach, the coracoclavicular ligament was seen intact. The distal clavicle fracture was fixed with K-wires and cerclage and the coracoid process was secured by a screw. Active-assisted rehabilitation of the shoulder was initiated 3 weeks after surgery. At the last follow-up of twelve months, the patient had painless full shoulder functions and X-rays show bony union. Early recovery to normal life is possible with surgical treatment in patients with distal clavicle fracture combined with coracoid fracture. [Copyright &y& Elsevier]

The article evaluates the effects of clavicular tunnel position in coracoclavicular (CC) ligament reconstruction. A study conducted a retrospective review of consecutive series of CC ligament reconstructions performed with two clavicular bone tunnels and a free tendon graft. Comparison of bone tunnel position showed that medialized bone tunnels were a significant predictor for early loss of reduction for the conoid and trapezoid bone tunnels.

Background: For treatment of acute acromioclavicular separations, we have been using a reproducible radiographic view of the coracoid—the cortical ring sign—that we believe allows for placement of percutaneous coracoclavicular fixation safely and reliably in the center of the coracoid base, while avoiding the coracoid tip. This study evaluates the coracoid anatomy that the cortical ring sign represents, its utility for guiding fixation trajectory, and the proximity of neurovascular structures to this proposed trajectory. Materials and methods: Kirschner wires were used to measure the orientation of the fluoroscopic beam in relation to the scapula and the proposed fixation trajectory using this radiographic view. Results: The cortical ring sign is achieved by first directing the x-ray beam perpendicular to the medial border of the scapula in the parasagittal plane and 49° off the axis of the scapular spine in the axial plane, then fine-tuning until the coracoid cortical ring becomes evident. The nearest neurovascular structures to the fixation trajectory are the suprascapular artery and nerve (< 2 cm). Conclusion: The cortical ring sign view targets the coracoid base and, as such, allows reliable, safe, percutaneous fixation in the center of the coracoid base. Level of Evidence: Basic Science. [Copyright &y& Elsevier]

Background: Recently acromioclavicular joint reconstruction techniques have focused on anatomic restoration of the coraco-clavicular (CC) ligaments. Such techniques involve creating bone tunnels in the distal clavicle and coracoid. Purpose: To define the anatomy of the human clavicle and coracoidprocess of the scapula, in order to guide surgeons in reconstructing the CC ligaments. Study Design: Descriptive laboratory study. Methods: One hundred twenty (60 paired) cadaveric clavicles and corresponding scapulae (mean age ± and standard deviation, 48.3 ± 16.6 years) devoid of soft tissue were analyzed (dry osteology). Differences related to race and sex were recorded. Nineteen fresh-frozen cadaveric clavicles with intact CC ligaments were measured as well (fresh anatomic). Results: The mean clavicle length was 149 ± 9.1 mm. In the dry osteology group, the distance from the lateral edge of the clavicle to the medial edge of the conoid tuberosity in male and female specimens was 47.2 ± 4.6 mm and 42.8 ± 5.6 mm, respectively (P = .006). The distance to the center of the trapezoid tuberosity was 25.4 ± 3.7 mm in males and 22.9 ± 3.7 mm in females (P = .04). The ratio of the distance to the medial edge of the conoid tuberosity divided by clavicle length was 0.31 in males and females. This ratio for the trapezoid was 0.17 in both sexes. The mean coracoid length was 45.2 ± 4.1 mm. The mean width and height of the coracoid process were 24.9 ± 2.5 mm and 11.9 ± 1.8 mm, respectively. No interracial differences in measurements were observed. In the fresh anatomic samples, the ratio of the distance to the conoid center to clavicle length was 0.24. This ratio for the trapezoid was 0.17. Conclusions: While absolute differences in the origin of the CC ligaments exist between men and women, the ratio of these origins to total clavicle length is constant. Clinical Relevance: Clavicle length can be obtained intraoperatively. These findings allow the surgeon to predict the origin of the conoid and trapezoid ligaments accurately and to correctly create bone tunnels to reconstruct the anatomy of the CC complex. [ABSTRACT FROM AUTHOR]