Search

Climate observations inform about the past and present state of the climate system. They underpin climate science, feed into policies for adaptation and mitigation, and increase awareness of the impacts of climate change. The Global Climate Observing System (GCOS), a body of the World Meteorological Organization (WMO), assesses the maturity of the required observing system and gives guidance for its development. The Essential Climate Variables (ECVs) are central to GCOS, and the global community must monitor them with the highest standards in the form of Climate Data Records (CDR). Today, a single ECV--the sea ice ECV--encapsulates all aspects of the sea ice environment. In the early 1990s it was a single variable (sea ice concentration) but is today an umbrella for four variables (adding thickness, edge/extent, and drift). In this contribution, we argue that GCOS should from now on consider a set of seven ECVs (sea ice concentration, thickness, snow depth, surface temperature, surface albedo, age, and drift). These seven ECVs are critical and cost effective to monitor with existing satellite Earth observation capability. We advise against placing these new variables under the umbrella of the single sea ice ECV. To start a set of distinct ECVs is indeed critical to avoid adding to the suboptimal situation we experience today and to reconcile the sea ice variables with the practice in other ECV domains. [ABSTRACT FROM AUTHOR]

Within the Copernicus Climate Change Service (C3S), ECMWF is producing the ERA5 reanalysis which, once completed, will embody a detailed record of the global atmosphere, land surface and ocean waves from 1950 onwards. This new reanalysis replaces the ERA‐Interim reanalysis (spanning 1979 onwards) which was started in 2006. ERA5 is based on the Integrated Forecasting System (IFS) Cy41r2 which was operational in 2016. ERA5 thus benefits from a decade of developments in model physics, core dynamics and data assimilation. In addition to a significantly enhanced horizontal resolution of 31 km, compared to 80 km for ERA‐Interim, ERA5 has hourly output throughout, and an uncertainty estimate from an ensemble (3‐hourly at half the horizontal resolution). This paper describes the general set‐up of ERA5, as well as a basic evaluation of characteristics and performance, with a focus on the dataset from 1979 onwards which is currently publicly available. Re‐forecasts from ERA5 analyses show a gain of up to one day in skill with respect to ERA‐Interim. Comparison with radiosonde and PILOT data prior to assimilation shows an improved fit for temperature, wind and humidity in the troposphere, but not the stratosphere. A comparison with independent buoy data shows a much improved fit for ocean wave height. The uncertainty estimate reflects the evolution of the observing systems used in ERA5. The enhanced temporal and spatial resolution allows for a detailed evolution of weather systems. For precipitation, global‐mean correlation with monthly‐mean GPCP data is increased from 67% to 77%. In general, low‐frequency variability is found to be well represented and from 10 hPa downwards general patterns of anomalies in temperature match those from the ERA‐Interim, MERRA‐2 and JRA‐55 reanalyses. [ABSTRACT FROM AUTHOR]

The Copernicus Climate Change Service (C3S) includes estimates of Essential Climate Variables (ECVs) as a series of Climate Data Records (CDRs) derived from satellite data. The C3S Surface Albedo (SA) v1.0 CDR is composed of observations from National Oceanic and Atmospheric Administration (NOAA) Very High Resolution Radiometers (AVHRR) (1981–2005), and VEGETATION sensors onboard Satellites for the Observation of the Earth (SPOT/VGT) (1998–2014) and Project for Onboard Autonomy satellite (PROBA-V) (2014–2020), and will continue with Sentinel-3 (from 2020 onwards). The goal of this study is to assess the uncertainties associated with the C3S PROBA-V SA v1.0 product, with a focus on the transition from SPOT/VGT to PROBA-V. The methodology followed the good practices recommended by the Land Product Validation sub-group (LPV) of the Working Group on Calibration and Validation (WGCV) of the Committee on Earth Observing Satellites (CEOS) for the validation of satellite-derived global albedo products. Several performance criteria were evaluated, including an intercomparison with National Aeronautics and Space Agency (NASA) MCD43A3 C6 products. C3S PROBA-V SA v1.0 and MCD43A3 C6 showed similar completeness but had higher fractions of missing data than C3S SPOT/VGT SA v1.0. C3S PROBA-V SA v1.0 showed similar precision (~1%) to MCD43A3 C6, improving the results of SPOT/VGT SA v1.0 (2–3%), but C3S PROBA-V SA v1.0 provided residual noise in the near-infrared (NIR). Good spatio-temporal continuity between C3S PROBA-V and SPOT/VGT SA v1.0 products was found with a mean bias between ±2%. The comparison with MCD43A3 C6 showed positive mean biases (5%, 8%, and 12% for visible, NIR and total shortwave, respectively). The accuracy assessment with ground measurements showed a median error of 18.4% with systematic overestimation (positive bias of 11.5%). The percentage of PROBA-V retrievals complying with the C3S target requirements was 28.6%. [ABSTRACT FROM AUTHOR]

The aim of Copernicus Climate Change Service (C3S) is to supply reliable climate data in support of strategies to adaptation and mitigation to climate change. The C3S provides access to high-quality climate data through its Climate Data Records (CDRs) of atmospheric, marine and land Essential Climate Variables (ECVs). Global Earth Surface Albedo (SA) satellite-based products are included in the land (biosphere) portfolio. SA is a magnitude which quantifies the fraction of solar energy reflected by the surface of the Earth. This paper details the retrieval methodology and preliminary validation results for global estimates of surface albedo based on Sentinel-3 observations for the C3S ECVs data (C3S SA v3.0). The retrieval algorithm exploits the synergistic use of the Ocean and Land Colour Instrument (OLCI) and the Sea and Land Surface Temperature Radiometer (SLSTR) on-board Sentinel-3 A and B satellites. Firstly, the atmospherically corrected reflectances are generated in the Copernicus Global Land Service framework. After that, the Bidirectional Reflectance Distribution Function (BRDF) inversion module concludes the BRDF model parameters, which are transferred to the angular integration module in order to generate spectral albedo quantities for the selected OLCI (Oa03, Oa04, Oa07, Oa17 and Oa21) and SLSTR (S1, S2, S5 and S6) bands. At the end, the spectral integration module generates broadband albedo quantities in three different standard broadband spectral regions (visible [0.4μ m − 0.7μ m ], near infrared [0.7μ m − 4μ m ] and total shortwave [0.3μ m − 4μ m ]). Preliminary validation results over 10-months demonstration period (July 2018–April 2019) show, in terms of spatial and temporal consistency, that C3S Sentinel-3 SA global estimates reached in general good agreement as compared to other satellite operational references derived from MODIS (MCD43A3 C6) and PROBA-V (C3S PROBA-V SA v1.0) acquisitions. The comparison with ground data shows similar results to the MCD43A3 C6 comparisons but opposite sign in differences (marginally positive in case of Sentinel-3), with accuracy of 0.005 (3.7%), precision of 0.016 (11.3%) and uncertainty of 0.032 (22.7%). Our results have demonstrated the feasibility to estimate global fields of SA from Sentinel-3 observations, with similar quality of existing operational products. These Sentinel-3 based SA datasets will give the continuity to the existing C3S SA CDR, introducing improvements in terms of spatial resolution (300 m) and spectral information (9 spectral albedos) in contrast to previous datasets based on Advanced Very High Resolution Radiometer (AVHRR; 4 km, 4 channels) and Vegetation instruments (VGT; 1 km, 4 channels). • Retrieval method for global surface albedo estimates from Sentinel-3 is proposed. • Algorithm is based on BRDF inversion, angular and spectral integration. • A cross-comparison with MODIS and PROBA-V satellite products is performed. • The direct validation includes comparison with spatially representative ground data. [ABSTRACT FROM AUTHOR]