Search

Single-phase active rectifiers exhibit an inherent strong second-order current harmonic on their dc-link. The latter is often undesirable from a load point of view and is therefore chosen to be eliminated. A common method is the use of a resonant passive LC filter tuned at the frequency, which increases the order of the system, posing certain difficulties for the voltage control design. This paper presents a comprehensive analysis of the dc-link dynamics. The equations are linearized by means of small variations, and a respective closed-loop regulator is formed utilizing the partial state feedback control theory for pseudocontinuous systems. The control output is fed to an inner current regulator, following the well-known cascaded loop method. The stability of the proposed controller is validated throughout the whole operating point regime and its robustness against system parameter variations is evaluated. A comparison with a conventional controller proves the advantages of the utilized method. The theoretical analysis is verified by means of simulations as well as real-time implementation on an experimental laboratory setup. [ABSTRACT FROM AUTHOR]

This paper proposes a vector control strategy for LCL-filter-based grid-connected voltage-source converters (VSCs). The proposed control strategy is inherently capable of attenuating the resonance phenomenon of such systems. This is an advantage over the existing methods, which require additional damping techniques. Moreover, the proposed vector control strategy is able to fully decouple the direct (d) and quadrature (q) components of the current in a rotating reference frame. The design procedure comprises a constrained optimization-based loop shaping. It utilizes the multi-input multi-output (MIMO) nonparametric model of the system along with a high-order linearly parameterized MIMO controller to form an open-loop transfer function matrix. Minimizing the second norm of the error between the open-loop transfer function matrix and a desired one, the coefficients of the controller are optimally determined. Conducting several reference tracking scenarios, the performance of the proposed vector controller is evaluated both by means of time-domain simulation studies in MATLAB/Simulink and experimental results. [ABSTRACT FROM AUTHOR]