Search

The problems of water scarcity and ecological fragility are common in the loess gully area. To research the distribution and evolution of the overburden fissures and quantitatively analyze them have certain theoretical and engineering significance for realizing the evaluation of overburden damage degree and safe and green mining. This paper takes the 6102 working face of Chuancao Gedan Coal Mine as the engineering background. The development law and distribution characteristics of overburden fissures caused by the mining of shallow coal seams in the loess gully area were studied by the combination of physical similarity simulation, numerical similarity simulation and fractal theory. The results show that the fractal dimension change of the overburden fissures caused by the shallow mining of coal seam groups in the loess gully area can be divided into three stages during the mining process of the working face. Repeated mining causes the activation and development of overburden fissures, the fractal dimension increases significantly, and the regularity of changes weakens. The magnitude of the stress near the working face and the fluctuation times of the stress in the goaf have an influence on the change of the fractal dimension of the overburden fissures. According to the development angle and the fractal dimension of the overburden fissures, the overburden rock above the goaf is divided into the collapse fissure area, the compaction fissure area, and the vertical fissure area. Overburden fissures develop violently in the vertical fissure area, the overburden fissures in the compaction fissure area are mostly transverse fissures, and the overburden fissures in the caving fissure area are irregular., Competing Interests: The authors have declared that no competing interests exist.

Air leakage from surface mining-induced fissures can easily cause spontaneous combustion of residual coal in the goaf, which threatens the safe production of the underground working face. In order to study the air leakage law of the goaf under the surface air leakage and the prevention and control technology of spontaneous combustion of residual coal. Based on engineering data from the 6104 working face of the Chuancao Gedan coal mine, this study uses a combination of theoretical analyses, numerical simulations, and field observations to study the dynamic distribution characteristics of the air leakage velocity of surface mining-induced fissures in shallow coal seams, the distribution characteristics of relative pressure, the air leakage velocity, the air leakage flow field, the distribution ranges for the "three zones" of spontaneous combustion in the goaf, and a reasonable range for the pressurized ventilation of the working face. The results show that there is a quadratic relationship between the air leakage speed from the surface mining-induced fissures in shallow coal seams and the distance from the working face. The air leakage speed decreases as the distance from the working face increases, and the air leakage speed in the middle of the working face is slower than the air leakage on either side of the goaf. The pressure difference between the goaf and the surface mining-induced fissures is the root cause of air leakage into the goaf, and a change in the pressure difference has a significant impact on the air leakage flow field and the distributions of the "three zones" of spontaneous combustion in the goaf. When the pressure difference between the ground surface and the working face is maintained within the range of 200~-200 Pa, air leakage is effectively reduced, and the spontaneous combustion of residual coal is inhibited. The research results reveal the air leakage mechanism in the goaf of shallow coal seams and provide a reference for the prevention and control of spontaneous combustion of residual coal in the goaf., Competing Interests: The authors have declared that no competing interests exist.

To address the technical limitations of automatic coal and gangue detection technology in fully mechanized top coal caving mining operations, the low radiation level radioactivity measurement method is utilized to assess the degree of coal-gangue mixture in top coal caving process. This approach is based on the distinguishing radiation characteristics of natural γ-rays between coal and gangue. This study analyzed the distribution characteristics of natural γ-rays in coal and rock layers of thick coal seams and the applicability of this method, introduced the basic principle of coal-gangue detection technology based on natural γ-ray, developed the test system about automatic coal-gangue detection, studied the radiation characteristics of coal and gangue, proposed determination model of the coal-gangue mixed degree, combined with the time sequence characteristics of the top coal's releasing flow and the energy spectrum characteristics of different layers of rock, realized the precise coal-gangue detection technology in complex structure thick coal seam with multiple gangue. Field tests were conducted in Lilou, Xiaoyu and Tashan Coal Mine. The test results were well corroborated with the research results and achieved the expected results, which laid the foundation for the field application of intelligent coal mining. [ABSTRACT FROM AUTHOR]

A coal mine in Datong is an integrated mine. At present, there is goaf in the upper and lower part of the mining coal seam. There is a lot of ponding in the goaf, which has great potential safety hazards for production. In order to find out the scope and location of ponding in goaf, the comprehensive geophysical exploration method combining transient electromagnetic method and high-density resistivity method is used to carry out the research. Firstly, the time-base, turn-off time, receiving delay, current, superposition times, and other parameters of the instrument are tested on the surface of known goaf to obtain the best instrument parameters, and the parameters are used to verify the feasibility of the research scheme; then, the transient electromagnetic method is used for large-area exploration on the surface of the mine, the suspected goaf ponding area is found through comprehensive analysis, and the high-density resistivity exploration is arranged in the suspected goaf ponding area. According to the obtained results, the scope and location of the goaf ponding area are accurately located through comprehensive analysis. The results show that there are two goaf ponding areas in the exploration area, which are located above the 8# coal seam currently mined; the range and location of goaf ponding area can be accurately obtained by using the comprehensive geophysical method of high-density electrical method and transient electromagnetic method. This method can provide reference for mine water prevention and control in Datong area and has great practical significance to ensure coal mine safety production. [ABSTRACT FROM AUTHOR]

Coal bump often occurs in coal mining among many working faces in mine group under the control of large geological bodies. In order to study the coal bump mechanism between adjacent working faces under the conditions of large fault and huge thick overburden conglomerate, this paper regards Yima mining area as a practical engineering background and theoretically analyzes the mechanical behavior of overlying rock in the spatial structure. Then, the deep-ground and whole-space measurement is carried out in the 13230 working face of Gengcun mine and 21121 working face of Qianqiu mine. The results show that the basic structural unit in Yima mining area is composed of two goafs, middle coal pillar, and overlying conglomerate. Under the condition of nonsynchronous mining in adjacent working faces, there is a comovement effect similar to lever's "prying" phenomenon in thick conglomerate beam—the conglomerate strata above larger goaf side induce an overall uplift movement of the corresponding strata above smaller goaf side, and uplift length of the conglomerate strata is related to the mining length, coal pillar width, caving angle, and coal-conglomerate distance. The results of surface subsidence, microseism, and stress in the two working faces verify the conglomerate's phenomenon of comovement effect and disturbance range and further explain the role of active movement of F16 fault and overall causes of huge thick conglomerate on the coal bump. The vertical stress of the 13230 face is relatively low at the beginning, and high horizontal stress by fault activation causes typical bump accident with the horizontal sliding of coal body. With the increasing development of 13230 face, the intensity and frequency of coal bump in horizontal direction decrease obviously, but with high proportion in vertical direction. The results provide a theoretical basis for the study on the mechanism of coal bump between two adjacent working faces under the conditions of huge thick conglomerate and large thrust fault. [ABSTRACT FROM AUTHOR]