Search

Coal combustion is the major contributor to global toxic selenium (Se) emissions. Inorganic elements in coals significantly affect Se partitioning during combustion. This work confirmed that the calcium (Ca) in ash had a stronger relationship with Se retention at 1300 °C than other major elements. Ca oxide chemically reacted with gaseous Se, and its sintering densification slightly affected Se adsorption capacities (44.45 −1840.71→35.17 −1540.15 mg/kg) at 300 − 1300 °C. Therefore, Ca in coals was identified as having potential for hindering gaseous Se emissions, and coals with increased Ca contents (2.74→5.19 wt%) were used in a 350 MW unit. The decreased Se mass distribution (3.54%→2.63%) in flue gas at air preheater inlet (320 −362 °C) confirmed the effectiveness of increased Ca content on gaseous Se emission reduction. More gaseous Se further condensed and was chemically adsorbed by fly ash when passed through an electrostatic precipitator, resulting in a significant increase in the Se content of fly ash. Additionally, the corresponding Se leaching ratio decreased from 4.88 − 35.74% to 1.87 − 26.31%, indicating enhanced stability of Se enriched in fly ash. This research confirmed the feasibility and environmental safety of sequestration of gaseous Se from flue gas to fly ash by increasing the Ca content in coals. [Display omitted] ● Se retention at 1300 °C is associated with Ca content in ash. ● Ca oxide removes more gaseous Se via chemical reaction during flue gas cooling. ● Coals with higher Ca contents will release less gaseous Se into flue gas. ● A higher Ca content in fly ash can enhance the stability of Se within. ● Electrostatic precipitator induces Se emission reduction with increased Ca content. [ABSTRACT FROM AUTHOR]

Coal combustion is one of the major pathways by which lead (Pb) enters the ecological environment. An effective method to control Pb emissions in a furnace is to transform the Pb from vapors to particles using Si-Al-based sorbents. However, the high price, poor thermal stability, and difficult molding of sorbents limits their application. Fly ash cenospheres (FACs) prepared from the waste of coal-fired power plants, which are mainly composed of SiO 2 and Al 2 O 3 , are ideal materials for Pb sorbents because of their high strength, light weight and low price. In this study, the adsorption and reaction mechanisms of FACs and several Si-Al-based sorbents for Pb vapors were investigated in a two-stage fixed-bed reaction system, and the thermal stability and regeneration characteristics of FACs were tested. The results indicate that the adsorption capacity for Pb vapors is FAC > kaolin > SiO 2 > γ-Al 2 O 3. The acidic sites, such as Si-O and Al-O bonds in FACs, were the main reaction sites for Pb adsorption and captured Pb in the form of stable Pb compounds (Pb2+). As the temperature increased from 700 to 1200 °C, the Pb adsorbed by FACs increased, and 55.21% of the Pb in the simulated flue gas was removed at 1200 °C. Kaolin is an excellent sorbent for Pb vapors. The adsorption capacity of kaolin for Pb first increases and then decreases with increasing temperature, and the maximum removal rate occurs at 1000 °C, reaching 33.46%. In addition, FACs are thermally stable and reusable. Therefore, the high-temperature application of FACs to remove Pb vapors has good prospects. [ABSTRACT FROM AUTHOR]