Search

Background: Climate influences the interaction between pathogens and their hosts significantly. This is particularly evident in the coffee industry, where fungal diseases like Cercospora coffeicola, causing brown‐eye spot, can reduce yields drastically. This study focuses on forecasting coffee brown‐eye spot using various models that incorporate agrometeorological data, allowing for predictions at least 1 week prior to the occurrence of disease. Data were gathered from eight locations across São Paulo and Minas Gerais, encompassing the South and Cerrado regions of Minas Gerais state. In the initial phase, various machine learning (ML) models and topologies were calibrated to forecast brown‐eye spot, identifying one with potential for advanced decision‐making. The top‐performing models were then employed in the next stage to forecast and spatially project the severity of brown‐eye spot across 2681 key Brazilian coffee‐producing municipalities. Meteorological data were sourced from NASA's Prediction of Worldwide Energy Resources platform, and the Penman–Monteith method was used to estimate reference evapotranspiration, leading to a Thornthwaite and Mather water‐balance calculation. Six ML models – K‐nearest neighbors (KNN), artificial neural network multilayer perceptron (MLP), support vector machine (SVM), random forests (RF), extreme gradient boosting (XGBoost), and gradient boosting regression (GradBOOSTING) – were employed, considering disease latency to time define input variables. Results: These models utilized climatic elements such as average air temperature, relative humidity, leaf wetness duration, rainfall, evapotranspiration, water deficit, and surplus. The XGBoost model proved most effective in high‐yielding conditions, demonstrating high precision and accuracy. Conversely, the SVM model excelled in low‐yielding scenarios. The incidence of brown‐eye spot varied noticeably between high‐ and low‐yield conditions, with significant regional differences observed. The accuracy of predicting brown‐eye spot severity in coffee plantations depended on the biennial production cycle. High‐yielding trees showed superior results with the XGBoost model (R2 = 0.77, root mean squared error, RMSE = 10.53), whereas the SVM model performed better under low‐yielding conditions (precision 0.76, RMSE = 12.82). Conclusion: The study's application of agrometeorological variables and ML models successfully predicted the incidence of brown‐eye spot in coffee plantations with a 7 day lead time, illustrating that they were valuable tools for managing this significant agricultural challenge. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Climate directly and indirectly influences agriculture, being the main responsible for low and high yields. Prior knowledge on yield helps coffee farmers in their decision-making and planning for the future harvest, avoiding unnecessary costs and losses during the harvesting process. Thus, we sought to predict coffee yield with regressive models using meteorological data of the state of Paraná, Brazil. This study was carried out in 15 localities that produce Coffea arabica in this Brazilian state. The climate data were collected using the NASA/POWER platform from 1989 to 2020, while the data of arabica coffee yield (bags/ha) were obtained by CONAB from 2003 to 2018. The Penman–Monteith method was used to calculate the reference evapotranspiration and the climatological water balance (WB) was calculated based on Thornthwaite and Mather (1955). Multiple linear regression was used in the data modeling, in which C. arabica yield was the dependent variable and air temperature, precipitation, solar radiation, water deficit, water surplus, and soil water storage were the independent variables. The comparison between the estimation models and the actual data was performed using the statistical indices RMSE (accuracy) and adjusted coefficient of determination (R2adj) (precision). Multiple linear regression models can predict arabica coffee yield in the state of Paraná 2 to 3 months before harvest. The maximum air temperature is the climate element that most influences coffee plants, especially during fruit formation (March). Maximum air temperatures of 31.01 °C in March can reduce coffee production. Wenceslau Braz, Jacarezinho, and Ibaiti presented the highest yields, with mean values of 32.5, 29.9, and 29.3 bags ha−1, respectively. The models calibrated for localities that have Argisol had the highest mean accuracy, with an RMSE of 2.68 bags ha−1. The best models were calibrated for Paranavaí (Latosol), with an RMSE of 0.78 bags ha−1 and R2adj of 0.89, and Ibaiti (Argisol), with RMSE and R2adj values of 3.09 bags ha−1 and 0.83, respectively. Paranavaí has a mean difference between the actual and estimated coffee yield of only 0.86 bags ha−1. The highest deviations were observed in Wenceslau Braz (9.17 bags ha−1) and the lowest deviations were found in Paranavaí (0.86 bags ha−1). The models can be used to predict arabica coffee yield, assisting the planning of coffee farmers in the northern region of the state of Paraná. [ABSTRACT FROM AUTHOR]

This study aimed to estimate the number of generations and cycle duration of the southern red mite, coffee berry borer, and coffee leaf miner using the thermal index to assist in controlling these main coffee pests in the state of Paraná, Brazil. The data of maximum and minimum air temperature (°C) and precipitation (mm) of all municipalities in the state from 1984 to 2018 were collected from the National Aeronautics and Space Administration/Prediction of Worldwide Energy Resources (NASA/POWER). The reference evapotranspiration was estimated using the (Camargo Campinas IAC Boletim 116:9, 1971) method and the water balance was calculated using the method of (Thornthwaite C, Mather J (1955) The water balance publications in climatology, 8 (1). DIT, Laboratory of climatology, Centerton, NJ, USA). The basal temperature of each pest minus the average temperature of the years was used to calculate the degrees-day, the duration of the pest cycle, and the number of generations per year. The influence of altitude on the development of coffee pests was measured using the Pearson correlation. The thermal index is able to estimate the damage caused by coffee pests in the state of Pará, Brazil. Coffee pests show greater severity in the north of Paraná, in the regions with the highest temperatures. It is the same region that concentrates most of the coffee production of the state. The results of the life cycle and number of generations were interpolated for the entire state using the kriging method. Coffee pests showed the highest severity in the north region of the state of Paraná, more specifically in the Northwest, North Central, and West Central mesoregions. These regions have concentrated most of the state's coffee production. Mesoregions with the highest coffee production in the state showed higher susceptibility to coffee pests. Altitude showed a high correlation (r > 0.6) with the cycle variability and number of generations of coffee pests. The average cycles of the coffee berry borer, coffee leaf miner, and southern red mite are 24.13 (± 8.34), 45.64 (± 18.61), and 21.51 (± 3.51) days, respectively. The average annual generation was 16.67 (± 4.77), 9.02 (± 2.75), and 17.32 (± 2.63) generations, for the coffee berry borer, the coffee red mite, and the southern red mite, respectively. [ABSTRACT FROM AUTHOR]

BACKGROUND: The loss of coffee leaves caused by the attack of pests and diseases significantly reduces its production and bean quality. Thus this study aimed to estimate foliation for regions with the highest production of arabica coffee in Brazil using nonlinear models as a function of climate. A 25‐year historical series (1995–2019) of Coffea arabica foliation (%) data was obtained by the Procafé Foundation in cultivations with no phytosanitary treatment. The climate data were obtained on a daily scale by NASA/POWER platform with a temporal resolution of 33 years (1987–2019) and a spatial resolution of approximately 106 km, thus allowing the calculation of the reference evapotranspiration (PET). Foliation estimation models were adjusted through regression analysis using four‐parameter sigmoidal logistic models. The analysis of the foliation trend of coffee plantations was carried out from degrees‐day for 70 locations. RESULTS: The general model calibrated to estimate the arabica coffee foliation was accurate (mean absolute percentage error = 2.19%) and precise (R2adj = 0.99) and can be used to assist decision‐making by coffee growers. The model had a sigmoidal trend of reduction, with parameters ymax = 97.63%, ymin = 9%, Xo = 3517.41 DD, and p = 6.27%, showing that foliation could reach 0.009% if the necessary phytosanitary controls are not carried out. CONCLUSION: Locations with high air temperatures over the year had low arabica coffee foliation, as shown by the correlation of −0.94. Therefore, coffee foliation can be estimated using degree days with accuracy and precision through the air temperature. This represents great convenience because crop foliation can be obtained using only a thermometer. © 2021 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]