Search

This paper presents systematic analysis and design of a megahertz multiple-receiver (RX) wireless power transfer (WPT) system driven by a Class E power amplifier. Both circuit-level and system-level analyses are conducted to discuss the characteristics of the WPT system. In order to simultaneously manage the power flow and maximize the overall system efficiency, a new control scheme is proposed that combines maximum efficiency point tracking and time-division multiplexing. Through the proposed scheme, RXs with different loading and coupling conditions can be charged by the same transmitter with simplified design and control strategy. Finally, the proposed control scheme is validated using an example 6.78-MHz three-RX WPT system. The experimental results show that various power requirements can be quickly and stably satisfied, and the overall average system efficiency can reach as high as 71.7%. [ABSTRACT FROM PUBLISHER]

Wireless power transfer has shown revolutionary potential in challenging the conventional charging method for consumer electronic devices. Through magnetic resonance coupling, it is possible to supply power from one transmitter to multiple receivers simultaneously. In a multiple-receiver system, the overall system efficiency highly depends on the loads’ and receivers' positions. This paper extends the conventional circuit-model-based analysis for the one-receiver system to investigate a general one-transmitter multiple-receiver system. It discusses the influence of the loads and mutual inductance on the system efficiency. The optimal loads, the input impedance, and power distribution are analyzed and used to discuss the proper system design and control methods. Finally, systems with a different number of receivers are designed, fabricated, and measured to validate the proposed method. Under the optimal loading conditions, an efficiency above 80% can be achieved for a system with three different receivers working at 13.56 MHz. [ABSTRACT FROM PUBLISHER]

In megahertz (MHz) wireless power transfer (WPT) systems, a varying reflected reactance due to a changing final load deteriorates the overall system performance, such as efficiency and output voltage stability. This article aims to achieve a compact and robust MHz WPT system working over a wide range of load. A novel concept of reactance compression design is proposed to compress the variation of the reflected reactance through positioning of a “reactance window.” Efficient receiving-side parameter design procedures are then developed to best compress the reactance variation and satisfy maximum output power requirement in a wide load range but without adding any other hardware. This makes it possible to directly apply the existing voltage-source design using a modified Class E power amplifier (PA) and current-source design using an LCC transformation network. An edge inductor also becomes worthy to replace the bulky air-core infinite inductor required by the modified Class E PA, thereby further improving circuit compactness. Finally, the receiving-side design concept and the edge inductor are experimentally implemented to verify their performance over a 5–50- $\Omega$ load and with the maximum final output power of 20 W. The results well validate the improved reactance compression, output voltage stability, efficiency, and harmonic distortions over the wide load range. [ABSTRACT FROM AUTHOR]

This paper develops a 6.78 MHz multiple-receiver wireless power transfer system driven by a Class E power amplifier. Constant output voltage is achieved for each receiver with optimized overall efficiency. A novel one-receiver model is built to analyze the overall power-efficiency characteristics. The loads and input voltage are then designed as two control variables. Through tuning the loads, constant output voltage is achieved by independent controllers at the receiver side. Then, the efficiency is optimized by tuning the input voltage at the transmitter side. Finally, the theoretical analysis and control scheme are validated using a three-receiver system. It shows that different constant output voltages, 5, 9, and 12 V can be achieved independently for different receivers. When the load resistance, real coupling, and number of receivers change, the voltage can be quickly regulated, and the overall optimum system efficiency is 66.6%. [ABSTRACT FROM AUTHOR]

The high-efficiency current-mode (CM) and voltage-mode (VM) Class-E power amplifiers (PAs) for MHz wireless power transfer (WPT) systems are first proposed in this paper and the design methodology for them is presented. The CM/VM Class-E PA is able to deliver the increasing/decreasing power with the increasing load and the efficiency maintains high even when the load varies in a wide range. The high efficiency and certain operation mode are realized by introducing an impedance transformation network with fixed components. The efficiency, output power, circuit tolerance, and robustness are all taken into consideration in the design procedure, which makes the CM and the VM Class-E PAs especially practical and efficient to real WPT systems. 6.78-MHz WPT systems with the CM and the VM Class-E PAs are fabricated and compared to that with the classical Class-E PA. The measurement results show that the output power is proportional to the load for the CM Class-E PA and is inversely proportional to the load for the VM Class-E PA. The efficiency for them maintains high, over 83%, when the load of PA varies from 10 to 100  $\Omega$, while the efficiency of the classical Class-E is about 60% in the worst case. The experiment results validate the feasibility of the proposed design methodology and show that the CM and the VM Class-E PAs present superior performance in WPT systems compared to the traditional Class-E PA. [ABSTRACT FROM AUTHOR]