Search

This paper presents experimental studies to investigate the compressive and shear behaviors of cold-formed thin-walled steel-foam concrete composite walls. Three compressive walls and three shear walls were tested. The failure mode and load-displacement curve of the specimen were obtained from the compressive experiment. The compressive wall infilled with foam concrete mainly experienced distortion buckling of the end stud and local crushing failure of the concrete. The stud openings had a limited effect on the compressive bearing capacity of the composite wall. The failure mode and load-deformation curve were obtained in shear tests. The ductility index, shear stiffness, yield load, peak load, energy dissipation, and stiffness degradation were analyzed. The shear composite wall filled with foam concrete mainly occurred concrete crushing failure, local or distortional buckling failure of the end stud, and cracking failure of the calcium silicate board. The shear stiffness, shear capacity, ductility, and energy dissipation of the composite wall could be significantly improved after filling with foam concrete. [ABSTRACT FROM AUTHOR]

This paper presents the experimental and numerical studies in the investigation of the concentrated compressive behaviors of cold-formed steel-foam concrete composite wall. The failure modes, load–displacement curves, and load–strain curves of the specimens were obtained from the experiments. The infilled specimen failed due to distortional buckling of the end stud and cracking of the concrete near the corner of the wall. The strength of the high strength cold-formed steel was not being fully utilized. A finite element model was established by ABAQUS software and validated by the test results to investigate the effect of the concrete strength, steel strength, the spacing between stud openings, and the thickness of the concrete protective layer on the behaviors of the composite wall. The results indicate that the improvement of concrete strength has the most obvious effect on the bearing capacity of the composite wall, while the changes in steel strength, concrete cover thickness, and hole spacing have limited effects. [ABSTRACT FROM AUTHOR]