Search

Oral colon delivery has widely been pursued exploiting naturally occurring polysaccharides degraded by the resident microbiota. However, their hydrophilicity may hinder the targeting performance. The aim of the present study was to manufacture and evaluate a double-coated delivery system leveraging intestinal microbiota, pH, and transit time for reliable colonic release. This system comprised a tablet core, a hydroxypropyl methylcellulose (HPMC) inner layer and an outer coating based on Eudragit ® S and guar gum. The tablets were loaded with paracetamol, selected as a tracer drug because of the well-known analytical profile and lack of major effects on bacterial viability. The HPMC and Eudragit ® S layers were applied by film-coating. Tested for in vitro release, the double-coated systems showed gastroresistance in 0.1 N HCl followed by lag phases of consistent duration in phosphate buffer pH 7.4, imparted by the HPMC layer and synergistically extended by the Eudragit ® S/guar gum one. In simulated colonic fluid with fecal bacteria from an inflammatory bowel disease patient, release was faster than in the presence of β-mannanase and in control culture medium. The bacteria-containing fluid was obtained by an experimental procedure making multiple tests possible from a single sampling and processing run. Thus, the study conducted proved the feasibility of the delivery system and ability of guar gum to trigger release in the presence of colon bacteria without impairing the barrier properties of the coating. Finally, it allowed an advantageous simulated colonic fluid preparation procedure to be set up, reducing the time, costs, and complexity of testing and enhancing replicability., (© 2023. Controlled Release Society.)

Odoribacter (O.) splanchnicus is an anaerobic member of the human intestinal microbiota. Its decrease in abundance has been associated with inflammatory bowel disease (IBD), non-alcoholic fatty liver, and cystic fibrosis. Considering the anti-inflammatory properties of O. splanchnicus and its possible use for IBD, intestinal isolate O. splanchnicus 57 was here formulated for oral colonic release based on a time-dependent strategy. Freeze-drying protocol was determined to ensure O. splanchnicus 57 viability during the process. Disintegrating tablets, containing the freeze-dried O. splanchnicus 57, were manufactured by direct compression and coated by powder-layering technique with hydroxypropyl methylcellulose (Methocel™ E50) in a tangential-spray fluid bed. Eudragit® L was then applied by spray-coating in a top-spray fluid bed. Double-coated tablets were tested for release, showing gastric resistance properties and, as desired, lag phases of reproducible duration prior to release in phosphate buffer pH 6.8. The cell viability and anti-inflammatory activity of the strain were assessed after the main manufacturing steps. While freeze-drying did not affect bacterial viability, the tableting and coating processes were more stressful. Nonetheless, O. splanchnicus 57 cells survived manufacturing and the final formulations had 10 6 -10 7 CFU/g of viable cells. The strain kept its anti-inflammatory properties after tableting and coating, reducing Escherichia coli lipopolysaccharide-induced interleukin-8 cytokine release from HT-29 cells. Overall, O. splanchnicus 57 strain was formulated successfully for oral colon delivery, opening new ways to formulate pure cultures of single anaerobic strains or mixtures for oral delivery., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

5-aminosalicylic acid (5-ASA) is the most widely used drug for the treatment of ulcerative colitis. The benefits of targeted delivery of 5-ASA to the large intestine are well known, resulting in reduced systemic absorption and increased local concentrations at the disease site. In the present study, a 5-ASA colon delivery system based on the time-dependent strategy, exploiting the relatively consistent small intestinal transit time (SITT), was manufactured and evaluated in vitro as well as in vivo. The system was obtained by successive spray-coating of an immediate-release tablet core with low-viscosity HPMC and Eudragit® L. The enteric film was effective in preventing release during the acidic stage of the in vitro test, while the HPMC coating brought about reproducible lag phases prior to release in phosphate buffer medium. A γ-scintigraphy investigation pointed out that, following administration to fasted and fed volunteers, disintegration of the units never occurred prior to colon arrival. In all cases, a lag time preceded the appearance of the drug and its N-acetyl metabolite in the bloodstream, which was found to correlate with the time of disintegration in a linear mode. The plasma levels of the drug and metabolite as well as their cumulative urinary recovery were relatively low with respect to those reported when 5-ASA is delivered to the small bowel., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A multiple-unit formulation for time-dependent colonic release of insulin was obtained by coating insulin and sodium glycocholate immediate-release minitablets with: (i) Methocel® E50, a low-viscosity hydroxypropyl methylcellulose (inner coating), (ii) 5:1 w/w Eudragit® NE/Explotab® V17, a mixture of a neutral polymethacrylate with a pore-forming superdisintegrant (intermediate coating), and (iii) Aqoat® AS, enteric-soluble hydroxypropyl methylcellulose acetate succinate (outer coating). Sodium glycocholate was added as a permeation enhancer while the inner, intermediate and outer coatings were aimed, respectively, at delaying the onset of release through swelling/erosion processes, extending the duration of the lag phase by slowing down water penetration into the underlying functional layer, and overcoming variable gastric residence time. In vitro studies showed that neither insulin nor sodium glycocholate were released from the three-layer system during 2h of testing in 0.1N HCl, while complete release of the protein and of the enhancer occurred in phosphate buffer, pH 6.8, after consistent lag phases. No significant changes were noticed in the release profiles following twelve-month storage at 4°C. Oral administration of the novel formulation to diabetic rats elicited a peak in the plasma insulin concentration after 6h, which was associated with a sharp decrease in the glycemic levels. The relative bioavailability and pharmacological availability of such a formulation, as determined vs. the uncoated tablets, were 2.2 and 10.3, respectively. Based on these results, the three-layer system presented was considered a potentially interesting tool for oral colonic delivery of insulin and adjuvant compounds., (Copyright © 2016 Elsevier B.V. All rights reserved.)

To prepare swellable/erodible time-dependent colon delivery systems with improved efficiency in delaying drug release, the application of an outer Eudragit® NE film, which contained the superdisintegrant Explotab® V17 as a pore former, was attempted. Tablet cores were successively spray-coated with a hydroxypropyl methylcellulose (HPMC) solution and diluted Eudragit® NE 30 D, wherein fixed amounts of Explotab® V17 were present. The resulting two-layer systems yielded lag phases of extended duration as compared with formulations provided with the HPMC layer only. By raising the thickness of the outer film, longer lag times were generally observed, whereas the effectiveness in deferring the drug liberation was reduced by increasing the pore former content, which, however, also resulted in a lower data variability. The films containing 20% of Explotab® V17 effectively and consistently prolonged the in vitro lag phase imparted by HPMC as a function of their thickness. Stored for 3 years under ambient conditions, a two-layer system with this outer film composition pointed out unmodified release patterns. The same system proved to meet gastroresistance criteria when enteric coated. The results obtained indicated that the proposed strategy would enable the preparation of erodible delivery systems with reduced size, possibly suitable as multiple-unit dosage forms., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

Oral colon delivery is pursued through a number of formulation strategies with the aim of enabling effective and well-tolerated treatments for large bowel pathologies or enhancing the intestinal absorption of peptide and protein drugs. According to such strategies, coated dosage forms for colonic release may be provided with microbiota, pH, pressure or time-dependent polymeric films. Microbiota-activated coatings are mostly obtained from polysaccharides of natural origin mixed with insoluble structuring excipients. Alternatively, synthetic azo compounds have been employed, generally requiring organic solvents for use as spray-coating agents. On the other hand, pH-sensitive films show responsiveness to pH changes in the lower gut, such as the rise generally observed in the terminal ileum and distal colon or the slight acidification of caecal contents by bacterial fermentation products. Pressure-sensitive coatings are intended for rupturing because of the relatively elevated pressure that may affect solid dosage forms in the large bowel. Finally, time-dependent films are expected to undergo timed erosion, break-up or permeabilization processes irrespective of the aforementioned physiological variables. In this review, the differing films applied for colon delivery purposes are surveyed, and details on their composition, manufacturing and performance are reported., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Oral colon delivery is currently considered of importance not only for the treatment of local pathologies, such as primarily inflammatory bowel disease (IBD), but also as a means of accomplishing systemic therapeutic goals. Although the large bowel fails to be ideally suited for absorption processes, it may indeed offer a number of advantages over the small intestine, including a long transit time, lower levels of peptidases and higher responsiveness to permeation enhancers. Accordingly, it has been under extensive investigation as a possible strategy to improve the oral bioavailability of peptide and protein drugs. Because of a strong underlying rationale, most of these studies have focused on insulin. In the present review, the impact of key anatomical and physiological characteristics of the colon on its viability as a protein release site is discussed. Moreover, the main formulation approaches to oral colon targeting are outlined along with the design features and performance of insulin-based devices., (Copyright © 2011 Elsevier B.V. All rights reserved.)

It is well known that the intestinal stability and absorption of protein drugs are improved when enzyme inhibitors/permeation enhancers are coadministered. Recently, it was hypothesized that an increased effectiveness of these adjuvants might be achieved by timing their release prior to that of the protein, so that a more favorable environment would be established in advance. Therefore, an oral system was proposed for two-pulse colonic release of insulin and the protease inhibitor camostat mesilate/absorption enhancer sodium glycocholate. The device consisted of a drug-containing core, an inner swellable/erodible low-viscosity hydroxypropyl methylcellulose (HPMC) coating, an intermediate adjuvant layer, and an additional outer HPMC coating. HPMC coats and camostat mesilate/sodium glycocholate films with differing thicknesses were applied to immediate-release tablet cores by aqueous spray coating. The obtained units were characterized for weight, thickness, breaking force, and release performance. All systems showed satisfactory technological properties and the pursued pulsatile delivery behavior, with programmable delay phases preceding inhibitor/enhancer release and elapsing between inhibitor/enhancer and protein release, respectively. Indeed, both lag times linearly correlated with the relevant HPMC coating level. The system was thus proven suitable for yielding two-pulse release profiles, in which lag phases could be modulated to provide convenient concentration patterns for proteins and adjuvants., (Copyright © 2011 Wiley-Liss, Inc.)

The feasibility of injection molding was explored in the preparation of a novel capsular device for oral pulsatile/delayed delivery based on swellable/erodible polymers. For this purpose, a mold intended to be coupled with a bench-top injection-molding press was designed. This was expected to enable the preparation of matching capsule cap and body items within a single manufacturing cycle and the selection of differing shell thicknesses (300, 600, and 900 μm). Hydroxypropylcellulose (Klucel(®) EF, LF, and GF) was employed as the release-controlling polymer in admixture with polyethylene glycol 1500 (10%, w/w) as the plasticizer. After preliminary trials aimed at the setup of operating conditions, Klucel(®) EF and LF capsule shells with satisfactory technological properties were manufactured. The performance of capsular devices filled with a tracer drug powder was studied by means of a modified USP31 disintegration apparatus. Typical in vitro delayed release patterns were thereby obtained, with lag time increasing as a function of the wall thickness. A good correlation was found between the latter parameter and t (10%), i.e., the time to 10% release, for both polymer grades employed. On the basis of the overall results, the investigated technique was proven suitable for the manufacturing of an innovative pulsatile release platform., (© 2011 American Association of Pharmaceutical Scientists)

The aim of this work was to prepare and evaluate an oral dosage form intended for time-dependent colon delivery of insulin along with a selected protease inhibitor (camostat mesilate) and absorption enhancer (sodium glycocholate). A previously described release platform, which had proven potentially suitable for the protein delivery, was exploited. Insulin compatibility with the above-mentioned adjuvants was preliminarily evaluated. For this purpose, the drug and its main degradation products were assayed by HPLC in insulin powder mixtures with camostat mesilate and/or sodium glycocholate stored 12 months at 4 degrees C. No significant decrease in protein content or increase in degradation product percentages beyond Eur. Ph. 6th Ed. limits was highlighted. Moreover, calorimetric studies performed on physical and compacted binary insulin mixtures with camostat mesilate and sodium glycocholate showed that the thermal behavior of both adjuvants was unchanged. Subsequently, tablet cores with differing compositions were prepared and spray-coated with an aqueous HPMC solution in order to obtain pulsatile delivery systems. The coated units were demonstrated to concurrently release the drug and the adjuvants in a prompt and quantitative mode after consistent lag times. Based on these results, the device was proven a potential candidate for colon delivery of insulin and the selected adjuvants., (2009 Wiley-Liss, Inc. and the American Pharmacists Association)

The aim of the present work was to evaluate the viability of a time-dependent delivery platform (Chronotopic) in preparing an insulin-based system intended for oral colon delivery. The main objectives were to assess the influence of the manufacturing process and storage conditions on the protein stability. Insulin-loaded cores were manufactured by direct compression and were subsequently coated with hydroxypropyl methylcellulose (HPMC) in a top-spray fluid bed up to increasing weight gains, namely 20%, 60% and 100%. In order to evaluate the impact the operating conditions may have on the protein integrity, insulin and its main degradation products (A21-desamido insulin -A21, Other Insulin-Related Compounds -OIRCs, and High-Molecular Weight Proteins -HMWPs) were assayed on samples collected after each process step by chromatographic methods. Furthermore, long-term (4 degrees C) and accelerated (25 degrees C-60% RH) stability studies were carried out on tablet cores and coated systems by assessing insulin, A21, OIRC and HMWP percentages throughout a one-year storage period. In addition, the in vitro release behaviour was investigated during the same study period. The overall results indicated that the manufacturing process is not detrimental for insulin integrity and that 4 degrees C storage temperature alters neither the protein content nor the release performances of the device. It was therefore concluded that insulin-containing systems intended for oral colon delivery can be obtained by the Chronotopic technology.

Increasing efforts have recently been spent onto the accomplishment of oral colon targeting. Indeed, this has been related to a number of local as well as systemic highly interesting applications, such as a more effective and tolerable therapy of inflammatory bowel disease (IBD), the pharmacological prevention of colorectal adenocarcinoma, and a possible improvement in the oral bioavailability of peptide and protein drugs. For the purpose of colon targeting, a variety of delivery technologies have been described, which rely on typical variation patterns shown by selected physiological parameters throughout the gastrointestinal tract. In particular, this article is focused on time-based formulation approaches that exploit the relative consistency in the small intestinal transit time (SITT) of dosage forms.

In recent years, many research efforts have been spent in the achievement of selective delivery of drugs into the colon following oral administration. Indeed, colonic release is regarded as a beneficial approach to the pharmacological treatment or prevention of widespread large bowel pathologies, such as inflammatory bowel disease and adenocarcinoma. In addition, it is extensively explored as a potential means of enhancing the oral bioavailability of peptides, proteins and other biotechnological molecules, which are known to be less prone to enzymatic degradation in the large, rather than in the small, intestine. Based on these premises, several formulation strategies have been attempted in pursuit of colonic release, chiefly including microflora-, pH-, pressure- and time-dependent delivery technologies. In particular, this review is focused on the main design features and release performances of time-controlled devices, which rely on the relative constancy that is observed in the small intestinal transit time of dosage forms.