Search

In the field of micro and mesoscale combustion, the feature of flame-wall thermal coupling is of great significance because of its small scale nature. Thus, this work provides a comprehensive heat transfer analysis in cylindrical combustors from the perspective of numerical simulation. The combustor has a fixed length-to-diameter aspect ratio of 10, and the channel diameter is scaling up from 1 mm to 11 mm to explore the influence of chamber dimension on heat transfer and flame structure. The distribution of convective and radiative heat flux on inner surface, contribution of thermal radiation are given. Moreover, the role of radiation in flame structure is analyzed, and the convective and radiative heat losses are quantitatively analyzed. We find that radiative heat flux is smaller compared to convective heat flux, and the proportion of radiative heat flux becomes larger with an increasing diameter. Thermal radiation does not change the flame structure when the diameter is less than 3 mm. When the diameter is greater than 5 mm, thermal radiation changes the location of flame front. The heat loss becomes larger at a smaller diameter, and heat loss ratio can reach approximately 73.6% in the combustor with diameter of 1 mm. [Display omitted] • Comprehensive heat transfer analyses in micro combustors are revealed. • The contributions of thermal radiation in combustors with different scales are investigated. • The role of radiation in the flame structure is analyzed. • Heat losses in cylindrical combustors from microscale to mesoscale are quantified. [ABSTRACT FROM AUTHOR]

In this paper, a distributed parameter model for tubular reactor in the ethylene cracking furnace based on 3-D temperature reconstruction is developed. The mathematical model was formulated to predict the distributions of the heat flux and the tube temperature while considering a non-uniform distribution of the surface heat transfer and the ethylene pyrolysis process. The results show that the heat flux distribution on the tubular reactor has four high heat flux zones, and the tube temperature reaches a maximum of 1088 °C. The value of the maximum tube temperature decreases compared with the value of the maximum heat flux due to the heat exchange coefficient of pyrolysis gas increasing slowly in the bend region. The tube temperature distribution was validated by using a spectrometer system and the errors between three major product yields at the tube outlet obtained by the proposed model and in-situ measured values were within 5%. This distributed parameter model can be used as a guide for ethylene cracking furnace operators and as a tool for design. [ABSTRACT FROM AUTHOR]