Search

International audience; A detailed investigation of the physicochemical properties and thermal characteristics of argan fruit residues (AFRs) was carried out to identify their potential application as biofuels. This experimental study covered the four main by-products of argan fruit: argan pulp (AP), argan nut shell (ANS), argan oilcake (AOC) and argan deoiled cake (ADC). Physicochemical analysis was performed to characterize biomass-based materials. Thermogravimetric techniques (TG, DTG and DTA) were applied to assess structural decomposition, biomass reactivity and combustion parameters. Lastly, thermal conductivity and diffusivity between 25 and 100 °C were measured using the transient plane source technique (TPS). The study shows that heating values were in the range of 17–22.5 MJ kg−1, which is comparable to those of wood pellets and lignite coal. The maximum ash content was found in AP and the minimum in ANS. The residual oil of AOC was found to affect the drying process and calorific value. Thermal analysis showed that ANS has the highest ignition temperature and thermal conductivity values and therefore appears to be the most reactive material. Our data show that ANS has a good potential to produce heat through direct combustion. A pretreatment appears to be necessary to improve the characteristics of AP and AOC in order to make them suitable biofuels in the near future.

International audience; Argan shell is one of the main by-products during argan oil production. It is considered as an attractive, cheap and renewable biomass source for sustainable energy utilization. The present paper reports on combustion characteristics of argan shell in order to evaluate their potential for thermochemical conversion. Combustion studies using thermogravimetry (TG) are performed at four different heating rates of 5, 10, 15 and 20 degrees C.min(-1). Kinetic parameters under non-isothermal condition are calculated using FWO (Flynn-Wall-Ozawa method) and KAS (Kissinger-Akahira-Sunose) model free methods. From the results obtained, it was revealed that when the conversion level (alpha) fluctuates between 0.1 and 0.55, the average activation energy were 154 and 145 KJ/mol for FWO and KAS methods, respectively. Then, it decreases drastically with alpha >= 0.6, reflecting the kinetic complexity of the combustion process characterized by a faster reaction caused by the intense devolatilization stage. Overall, the results highlight the potential use of argan shell as a biomass product for thermal conversion through combustion.

This article reports on the effect of swirl intensity on the flow and combustion characteristics of pulverized olive waste (OW) burning. Numerical simulations are carried out using the computationa...