Search

In this work, the localization of reactive compatibilizer (RC, containing poly(methyl methacrylate) (PMMA) backbone with randomly distributed glycidyl methacrylate (GMA) on it) at the polyvinylidene fluoride/poly(l-lactic acid) (PVDF/PLLA) interface has been manipulated by means of GMA contents. At the very beginning of mixing, RC tends to stay in the PVDF phase due to the miscibility between PVDF and PMMA. Upon further shearing, more and more PLLA chains have been grafted on PMMA backbone, producing PLLA–g–PMMA copolymer. The balanced stress on two sides accounts for the localization of compatibilizers at the PVDF/PLLA interface. Finally, the stress of the PLLA side has been enhanced remarkably due to the higher graft density of PLLA, resulting in the enrichment of the copolymer in the PLLA matrix. The migration of RC from the PVDF phase to the immiscible interface and PLLA matrix can be accelerated by employing RC with higher GMA content. Furthermore, the compatibilizer localization produces a significant influence on the morphology and ductility of the PVDF/PLLA blend. Only when the compatibilizers precisely localize at the interface, the blend exhibits the smallest domain and highest elongation at break. Our results are of great significance for not only the fabrication of PLLA with high ductility, but also the precise localization of compatibilizers at the interface of the immiscible blend. [ABSTRACT FROM AUTHOR]

Reactive compatibilization is an effective method to improve the compatibility of immiscible polymer blends. The in-situ-formed graft/block copolymers should be thermodynamically located at the interface to bridge the neighboring phases. Unfortunately, they are often pulled out of the interface because of the asymmetric molecular structures. Here, we propose a new strategy to compatibilize immiscible polymer blends called reactive splicing compatibilization. Poly (styrene- co -glycidyl methacrylate) (SG) with high glycidyl methacrylate (GMA) content is used as the reactive backbone chain. Both poly (l -lactic acid) (PLLA) and poly (butylene adipate-co-terephthalate) (PBAT) molecular chains can be easily grafted onto the SG main backbone by the reaction of the terminal carboxylic acid groups with the epoxide groups in the melt. Direct melt blending SG with PLLA and/or PBAT leads to reactive compatibilizers with various molecular architectures, which are used for subsequent compatibilization of PLLA/PBAT blends. It was found that the compatibilizer architecture significantly affects the compatibilization efficiency. The best compatibilization occurs with a reactive compatibilizer of SG-g-PBAT with the SG to PBAT weight ratio of 1:2. The compatibilized PLLA/PBAT (50/50 w/w) blend has precise co-continuous phase morphology with very few micelles. The blend exhibits extremely high Charpy notched impact strength of 90.2 kJ/m2 and tensile strength of 33.3 MPa. The principle of the facile splicing compatibilization strategy is highly applicable to many other immiscible blends with both components containing reactive groups. We report the splicing compatibilization strategy for immiscible polymer blends. The compatibilizer architecture effects on the compatiblization efficiency were investigated. Image 1 • New compatibilization strategy called reactive splicing compatibilization was proposed. • Reactive comb compatibilizers with various architectures were synthesized by melt blending. • Molecular architecture effects on compatibilization of PBAT/PLLA blends were investigated. • PLLA/PBAT blends with superior toughness and high tensile strength were prepared. [ABSTRACT FROM AUTHOR]