Search

In this article, we study closed-loop digital predistortion (DPD) systems and associated learning algorithms. Specifically, we propose various low-complexity approaches to estimate and manipulate the inverse of the input data covariance matrix (CM) and combine them with the so-called self-orthogonalized (SO) learning rule. The inherent simplicity of the SO algorithm, combined with the proposed solutions, allows for remarkably reduced complexity in the DPD system while maintaining similar linearization performance compared to other state-of-the-art methods. This is demonstrated with thorough over-the-air (OTA) mmW measurement results at 28 GHz, incorporating a state-of-the-art 64-element active antenna array, and very wide channel bandwidths up to 800 MHz. In addition, complexity analyses are carried out, which together with the measured linearization performance demonstrates favorable performance–complexity tradeoffs in linearizing mmW active array transmitters through the proposed solutions. The techniques can find application in systems where the power amplifier (PA) nonlinearities are time-varying and thus frequent or even constant updating of the DPD is required, good examples being mmW adaptive antenna arrays as well as terminal transmitters in 5G and beyond networks. [ABSTRACT FROM AUTHOR]

In this paper, we present a class of cascaded nonlinear models for complex-valued system identification, aimed at baseband modeling of nonlinear radio systems. The proposed models consist of serially connected elementary linear and nonlinear blocks, with the nonlinear blocks implemented as uniform spline-interpolated look-up tables (LUT) and the linear blocks as FIR filters. Wiener, Hammerstein, and Wiener-Hammerstein models are built, and simple but efficient gradient based adaptive learning rules are derived for all the models. This approach leads to remarkably simple solutions in terms of computational complexity, making the techniques suitable for real-time implementation. The proposed methods are then applied to full-duplex self-interference cancellation and digital predistortion in various real-life scenarios. First, evaluations with measured data from an in-band full-duplex prototype working at 2.4 GHz ISM band show that the algorithms are capable of obtaining similar cancellation performance as existing state-of-the-art solutions, regardless of the clearly reduced complexity. Second, a mmW active antenna array working at 28 GHz center frequency is digitally predistorted with the proposed solutions. The unwanted emissions and nonlinear distortion are suppressed to similar levels as with other state-of-the art solutions, and the corresponding linearity specifications are fulfilled in all cases, while the processing complexity is again drastically reduced. [ABSTRACT FROM AUTHOR]

In this article, we study digital predistortion (DPD)-based linearization with a specific focus on millimeter-wave (mmW) active antenna arrays. Due to the very large-channel bandwidths and beam-dependence of nonlinear distortion in such systems, we present a closed-loop DPD learning architecture, lookup table (LUT)-based memory DPD models, and low-complexity sign-based estimation algorithms such that even continuous DPD learning could be technically feasible. To this end, three different learning algorithms—sign, signed regressor, and sign–sign—are formulated for the LUT-based DPD models such that the potential rank deficiencies, experienced in earlier methods, are avoided while facilitating greatly reduced learning complexity. The injection-based LUT DPD structure is also shown to allow for low numbers and reduced dynamic range of the involved LUT entries. Extensive RF measurements utilizing a state-of-the-art mmW active antenna array system at 28 GHz are carried out and reported to validate the methods, incorporating very wide channel bandwidths of 400 and 800 MHz while pushing the array close to saturation. In addition, the processing and learning complexities of the considered techniques are analyzed, which, together with the measured linearization performance figures, allows to assess the complexity–performance tradeoffs of the proposed solutions. Overall, the results show that efficient mmW array linearization can be obtained through the proposed methods at very low complexity. [ABSTRACT FROM AUTHOR]

Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing transceivers. In this paper, to suppress such unwanted emissions, a low-complexity subband digital predistortion solution, specifically tailored for spectrally noncontiguous transmission schemes in low-cost devices, is proposed. The proposed technique aims at mitigating only the selected spurious intermodulation distortion components at the PA output, hence allowing for substantially reduced processing complexity compared with classical linearization solutions. Furthermore, novel decorrelation-based parameter learning solutions are also proposed and formulated, which offer reduced computing complexity in parameter estimation as well as the ability to track time-varying features adaptively. Comprehensive simulation and RF measurement results are provided, using a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed solution in real-world scenarios. The obtained results demonstrate that highly efficient spurious component suppression can be obtained using the proposed solutions. [ABSTRACT FROM PUBLISHER]

Spectrally non-contiguous transmissions pose serious transceiver design challenges due to the nonlinear PA. When two or more non-contiguous carriers with close proximity are amplified by the same PA, spurious emissions inside or in the vicinity of the transmitter RF band are created. These spurious emissions may violate emission limits or otherwise compromise network coverage and reliability. Lowering the transmit power is a straightforward remedy, but it will reduce throughput, coverage, and power efficiency of the device. To improve linearity without sacrificing performance, several DPD techniques have recently been proposed to target the spurious emissions explicitly. These techniques are designed to minimize the computational and hardware complexity of DPD, thus making them better suited for mobile terminals and other lowcost devices. In this article, these recent advances in DPD for non-contiguous transmission scenarios are discussed, with a focus on mitigating the spurious emissions in the concrete example case of non-contiguous dual-carrier transmission. The techniques are compared to more traditional DPD approaches in terms of their computational and hardware complexities, as well as linearization performance. [ABSTRACT FROM AUTHOR]