Search

Purpose: This study aims to fabricate the acrylic-based polymeric composite coating with a hydrophobic surface associated with natural oil polyol (NOP) and polydimethylsiloxane with the incorporation of 3 Wt.% SiO2 nanoparticle (SiO2np) against the corrosive NaCl media. Design/methodology/approach: The structural properties of the formulated polymeric composite coatings were investigated by using Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, water contact angle (WCA) and cross-hatch (X-Hatch) tests. The WCA measurement was used to study the surface wettability of the formulated polymeric composite coatings. The corrosion protection performance of the nanocomposite coated on the mild steel substrate was studied by immersing the samples in 3.5 Wt.% NaCl solution for 30 days using electrochemical impedance spectroscopy. Findings: The enhanced polymeric composite coating system performed with an excellent increase in the WCA up to 111.1° which is good hydrophobic nature and very high coating resistance in the range of 1010 Ω attributed to the superiority of SiO2np. Originality/value: The incorporation of SiO2np into the polymeric coating could enhance the surface roughness and hydrophobic properties that could increase corrosion protection. This approach is a novel attempt of using NOP along with the addition of SiO2np. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to develop the bio-composite organic coatings by adding the bio-based additives that are extracted from banana peels and henna leaves as the organic corrosion inhibitors. Design/methodology/approach: Bioactive constituents with inhibition properties are extracted from banana peels and henna leaves by using ethanol to form the ethanolic extract. The inhibiting efficiency of these bioactive constituents on mild steel corrosion in 3.5% sodium hydroxide (NaCl) solution is investigated. The investigation is performed using electrochemical impedance studies for 30 days. The optical and adhesive properties of the bio-composite coating systems have also been studied. Findings: The best protection is obtained as the loading ratio of the banana peels ethanolic extract (BPEE) and henna leaves ethanolic extract (HLEE) are 10 Wt.% and 30 Wt.%, respectively. Overall, the results obtained show that the BPEE and HLEE not only enhance the optical properties but also can serve as an effective inhibitor for corrosion without affecting the adhesiveness of the neat acrylic properties. Originality/value: Banana peels and henna leaves consist of bioactive constituents that have anti-corrosion properties which could inhibit corrosion. [ABSTRACT FROM AUTHOR]