Search

In this research activity, the manufacturing of metallic coatings on polymer-based panels through the low pressure cold spray technique was studied. Aluminium particles were sprayed for the metallization and carbon fibre composite materials with thermoplastic matrix (PP, PA66) were used as substrates. Different deposition parameter combinations have been set to investigate the feasibility of the process; SEM analyses were carried out to study the coating surface morphology and the interface interaction between particle and substrate. The results showed that the CS process is an effective technique to create aluminium coatings on polymeric matrix composite materials: compact coatings can be obtained if the process parameters are properly set.

International audience; Composite materials are widely used as main parts and structural components in different fields, especially for automotive and military applications. Although these materials supply different advantages comparing to the metals, their implementation in engineering applications is limited due to low electrical and thermal properties and low resistance to erosion. To enhance these above-mentioned properties, the metallization of composite materials by creating a thin metal film on their surface can be achieved. Among different coating deposition techniques, Cold Spray appears to be the most suitable one for the metallization of temperature-sensitive materials such as polymers and composites with a thermoplastic matrix. This process relies on kinetic energy for the formation of the coating rather than on thermal energy and consequent erosion and degradation of the polymer-based composite can be avoided. In the last years, a new method to produce composite materials, as known as Fused Filament Fabrication (FFF), has been developed for industrial applications. This technique consists of a 3D printing process that involves the thermal extrusion of thermoplastic polymer and fibers in the form of filaments from a heated mobile nozzle. The implementation of this new technique is leading to the manufacturing of customized composite materials for the cold spray application. In the presented experimental campaign, Onyx material is used as a substrate. This material is made of Nylon, a thermoplastic matrix, and chopped carbon fibers randomly dispersed in it. Aluminum powders were cold sprayed on the Onyx substrate with a low-pressure cold spray (LPCS) system. This study aims to investigate the possibility of the metalizing 3D-printed composite material by cold spray technology. For this purpose, optical and microscopical analyses are carried out. Based on the results, the feasibility of the process and the influence of the morphology of the substrate are discussed, and optimal spraying conditions are proposed.

The deposition of steel powders on glass fiber reinforced polymer (GFRP) with the Cold Spray technique is investigated. Metallization of composite materials is still challenging when high-strength and dense powders, such as steel, are used due to excessive erosion of the polymer or disruption of the fibers during the deposition. To overcome these issues, low-pressure cold spray equipment has been used for the experimental campaign shown in this paper. Different coatings were obtained by using nitrogen as the carrier gas and different sets of pressure and standoff distance. Optimization of the process parameters, including the stratification of the laminate, has been carried out. Results of an initial study of the feasibility of the process and the influence of the different chosen spray conditions are exposed. In particular, the bonding mechanisms of steel powders and their morphology are discussed.

Cold spray deposition of aluminum powders on polyethylene reinforced with glass fibers has been studied. Different processing conditions, including different stratifications of the fiber-reinforced polymer used as a substrate, have been investigated to better understand the deposition mechanism. The experimental campaign has been conceived and tailored to highlight the influence of several process parameters on the deposition of the first layer of particles. The results obtained allowed to highlight and clarify the influence of standoff distance and gas pressure and also gave some insights concerning the effect of the substrate stratification. Guidelines regarding the design of the manufacturing process have been also released.

The customization of material characteristics in combination with extreme design flexibility represents the most intriguing scope of Additive Manufacturing. In this context, this work investigated the feasibility of the Laser-based Powder Bed Fusion process (L-PBF) of pre-mixed Inconel 718-Cu powder blends, exploring the effects of the laser-related process parameters and Cu addition, in order to develop alloys able to combine excellent mechanical properties under severe operating conditions with good thermal and electrical conductivity. More specifically, this work investigated the effects of using a layer thickness of $\boldsymbol{30 \mu \mathrm{m}}$ on the process quality in terms of density, microhardness, microstructure and surface roughness. Results showed that cubic samples with 10 mm side were successfully produced, with a relative density always greater than 98 percent. The resulting microhardness was from 290 to 340 HV, decreasing as a function of the Cu addition and keyhole defects development. The latter were the main defects observed in the microstructure, characterized also by heterogeneous crystalline grains for all the investigated conditions. Finally, the surface roughness (Sa) was from 7 to $\boldsymbol{25 \mu \mathrm{m}}$ , in line with the typical values of L-PBF products.

In this work, the mechanical behaviour of natural composite fibre sandwich panels is experimentally investigated. The composite sandwich panels are composed of a natural core made of Posidonia dried leaves reinforced with aluminium skins. The introduced material system is characterized by good structural behaviour (due to the aluminium skins) combined with the good thermal and acoustical insulation provided by the Posidonia core. Flexural and impact tests, characterized by different impact energies, have been performed on specimens with and without the aluminium skins, to preliminary assess the influence of the Posidonia core densities on the natural fibre sandwich mechanical behaviour.

Additive Manufacturing (AM), applied to metal industry, is a family of processes that allow complex shape components to be realized from raw materials in the form of powders. The compaction of the powders is achieved by local melting of bed. Electron Beam Melting (EBM) is an additive manufacturing process in which a focalized electron beam is the heat source that allows the powders to be compacted. By EBM it is possible to realize complex shape components; this feature is of particular interest in titanium industry where numerous efforts are done to develop near net shape processes. One of the limits of EBM based AM process is the difficulty to realize large dimension parts. Due to this limit the study of joining processes of different parts is of great interest. In the present work the microstructure evolution of sheets of TI6Al4V made by EBM and joined by Linear Friction Welding (LFW) is analyzed in details. The bulk microstructure of the specimen is fine lamellar; lamellae are enclosed in alpha colonies. Different types of porosities are observed. In the joint a Thermo Mechanical Affected Zone (TMAZ) and Weld Bead (WB) are evident. In TMAZ a partial recrystallization occurs and the parent microstructure is deformed. Complete recrystallization occurs in WB whose structure is martensitic.

In this activity, customized panels for the CS deposition have been produced and aluminium has been deposited using air as a carrier gas. The custom-made panels were made with different matrix thicknesses on the surface in order to point out the influence of the fibres in the deposition and to study the feasibility and the growth of the coating. The polymer chosen for the matrix is polypropylene, widely used in the automotive sector, while for the reinforcements glass fibres have been used. Different process parameters have been examined in order to point out the influence of temperature, stand-off distance and pressure chosen, on the compaction and densification of the coating produced. In addition, morphological investigations were performed to further characterize the coatings deposited. It has been noticed that aluminium powders can be effectively deposited on polypropylene panels, leading to significantly better results when the thickness of the matrix is ​​sufficient to prevent the powders bouncing elastically on the fibres, while benefiting from the stiffening effect of the latter.

As a result of the increasing environmental awareness, the concern for environmental sustainability and the growing global waste problem, the interest of bio-composites materials is growing rapidly in the last years in order to use them in various engineering fields. Tremendous advantages and opportunities are associated with the use of these materials. On the other hand, some issues are related to the superficial properties of the bio-laminates, in particular the wear properties, the flame resistance and the aesthetic appearance have to be improved in order to extend the application fields of these materials. Aiming to these goals this paper deals with the study of the deposition of aluminum coating through cold spray process on hemp/PLA bio-composites manufactured by using the compression molding technique. Therefore, SEM observations, roughness analyses, bending tests, pin on disk and scratch tests were carried out in order to study the feasibility of the process and to investigate on the properties of the coated samples. The experimental results proved that when the process parameters of the deposition process are properly set, no damages are induced in the composite panel and that the aluminum coating, under specific load conditions, resulted to be able to protect the substrate.

The use of hard metals, in particular for cutting tools, is becoming wider. Their manufacturing cost, higher than traditional steel, is compensated by an increased lifetime. This work involves the rheological characterization of a WC–Co compound, in order to evaluate its viscosity for different values of strain rate. Following this characterization, the data are implemented in a FEM code, in order to simulate the extrusion processes of such compounds to manufacture hard metal bars. This study highlights the importance of an accurate viscosity evaluation of these mixtures and the correct setting of FEM parameters in order to predict successfully extrusion processes. As an example, an analysis is presented for the case of cutting tools with helical holes for the passing of fluid coolant.