Search

To realize multiferroic and magnetoelectric properties, bi-layered nanocomposite films consisting of CoFe2O4 (CFO)/Pb1-xSrxTiO3 (PST) phases (x=0.1, 0.2, and 0.3) have been deposited on Pt/TiO2/SiO2/Si substrate by using a metallo-organic decomposition process. Both the PST perovskite and the CFO spinel phases are confirmed from X-ray diffraction patterns and Raman spectra of the composite films. The composite films exhibit room temperature multiferroic properties. The values of saturation magnetization (Ms), remanent magnetization (Mr), and coercive field (Hc) of the composite films are in the range of 108-119 kA/m, 42-51 kA/m, and 44.5-64.1 kA/m, respectively. In addition, the saturation polarization (Ps), remanent polarization (Pr), and electrical coercive field (Ec) are observed in the range of 11.3-14.4 μC/cm², 2.9-4.8 μC/cm², and 56-59.5 kV/cm, respectively. The dielectric response in the presence of applied magnetic field, Hdc∼238.6 kA/m shows a high magnetocapacitance value ∼385% at frequency 100 kHz for CFO/PST composite film with x=0.1. The maximum magnetoelectric voltage co-efficient value, αE∼380 kV/(m×T) has been achieved in the composite films with x=0.1. The influence of elastic/and or interfacial strain on multiferroic magnetoelectric properties is evident from the results. [ABSTRACT FROM AUTHOR]

We have synthesized piezomagnetic–piezoelectric composites thin films MnFe 2 O 4 /(Pb 1−x Sr x )TiO 3 , where x=0.1, 0.2, and 0.3, using the metalorganic deposition (MOD) reaction method. The structural and microstructural analysis using the X-ray diffraction (XRD), AFM, and SEM reveals the presence of homogenous growth of both pervoskite and spinel phases in the composite films. Our results show that all the composites films exhibit good multiferroic as well as considerable magnetoelectric coupling. The impedance ( Z ′ and Z ″) and electrical modulus ( M ′ and M ″) Nyquist plots show distinct electrical responses with the magnetic field. Our analyses suggest that this electrical response arises due to the coexistence of the high resistive phase and the comparatively conductive phase in the MFO/PST composite films. The maximum magnetoelectric coefficient (α) is found to be 4.29 V Oe −1 cm −1 and 2.82 V Oe −1 cm −1 for compositions x=0.1 and 0.2. These values are substantially larger than those reported for bilayer composites thin films in literature and make them interesting for room temperature device applications. [ABSTRACT FROM AUTHOR]

MnFe2O4/(Pb0.8Sr0.2)TiO3(MFO/PST20) heterostructured composite films with three different structures have been grown on Pt/TiO2/SiO2/Si substrates by metal–organic decomposition processing via spin coating technique. The structural analysis revealed that the crystal axes of the MnFe2O4are aligned with those of the PST20 ferroelectric matrix with obvious interfaces and no diffusions exist in all the three composite films. These composite films exhibit simultaneously multiferroic and magnetoelectric responses at room temperature. The growth structure of MFO and PST20 layers has an effect on multiferroic and magnetoelectric coupling behaviours of the composite films. The bi- and four-layered MFO/PST20 composite films exhibit superior ferroelectric properties compared to the tri-layered film. The increasing MFO and PST20 layers in the composite films enhance ferromagnetic properties and are closely related to the strain release in MnFe2O4phase. The MFO/PST20 bi-layered composite film shows a high magnetoelectric voltage co-efficientαE~ 194 mVcm−1Oe−1at a dc magnetic fieldHdc~ 2.5 kOe. A significant decrease inαEvalue has been observed for tri- and four- layered composite films. A close correlation between phase selective residual stress and magnetoelectric properties has been emerged. The results are reasonably encouraging for employing MnFe2O4for growing multiferroic–magnetoelectric composite films. [ABSTRACT FROM AUTHOR]