Search

Network research generally requires a simulation or emulation environment to test protocol implementations, to evaluate the performance of a scheme or a system, and to study complicated and highly varying network operations. For large network simulation, simulators will consume a large amount of time and memory, and its result is largely based on some modeling assumptions that may not hold in the real world. Emulators are difficult to scale for large network emulation because of the high cost of equipment if a one-to-one mapping scheme is employed. Otherwise, the target network has to be abstracted to a single router modeled with some performance metrics. In this paper, we present a distributed IP network emulator cluster EMPOWER, which not only can be used to emulate a large network with a limited number of commodity computers, but also can generate user-defined arbitrary network conditions and traffic dynamics at packet level for specific test scenarios. EMPOWER is highly scalable in that each emulator node could be configured to emulate multiple network nodes, and the increment of the number of emulator nodes does not affect emulation validity. Some significant research issues such as network mapping and mobile wireless network emulation are discussed and addressed. Preliminary emulation results show that EMPOWER is capable of assisting the study of both wireline and wireless network protocols and applications. [ABSTRACT FROM AUTHOR]

It is desirable for the load in a distributed system to be balanced evenly. A dynamic process migration protocol is needed in order to achieve load balancing in a user transparent manner. A distributed algorithm for load balancing which is network topology independent is proposed in this paper. Different network topologies and low-level communications protocols affect the choice of only some system design parameters. The "drafting" algorithm attempts to compromise two contradictory goals: maximize the processor utilization and minimize the communication overhead. The main objective of this paper is to describe the dynamic process migration protocol based on the proposed drafting algorithm. A sample distributed system is used to further illustrate the drafting algorithm and to show how to define system design parameters. The system performance is measured by simulation experiments based on the sample system. [ABSTRACT FROM AUTHOR]

This paper presents a Markov chain model to analyze the performance of shared-resource array processors for multiple vector processing. Such a parallel processor contains multiple control units sharing a resource pool of processing elements and operating with multiple single-instruction multiple-data streams (MSIMD). In the steady state, the Markov model corresponds to a two-dimensional Markov chain, which can be expressed by a set of equilibrium equations. An iterative method is developed to solve the Markov chain after projecting the equilibrium equations onto a one-dimensional state space. The convergence rate of the iterative method can be greatly enhanced by choosing starting values corresponding to the approximated analytical results obtained earlier by the authors. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) have attracted intense interest due to their extensible capability. In this paper, we attempt to answer a fundamental but practical question: "how should we deploy these nodes?" In most current designs, sensor nodes are randomly or uniformly distributed because of their simplicity. However, the node deployment has a great impact on the performance of WSNs. Instead of maintaining the coverage for some snapshots of a WSN, it is essential that we can provide a continuous coverage in the whole lifecycle of the WSN. We will exhibit the weakness of the uniform distribution by disclosing the fatal sink routing-hole problem. To address this problem, we propose a non-uniform, power-aware distribution scheme. Our analysis and simulation results show that the power-aware deployment scheme can significantly improve the long-term network connectivity and service quality. [ABSTRACT FROM AUTHOR]

With the marvelous development of wireless techniques and ubiquitous deployment of wireless systems indoors, myriad indoor location-based services (ILBSs) have permeated into numerous aspects of modern life. The most fundamental functionality is to pinpoint the location of the target via wireless devices. According to how wireless devices interact with the target, wireless indoor localization schemes roughly fall into two categories: device based and device free. In device-based localization, a wireless device (e.g., a smartphone) is attached to the target and computes its location through cooperation with other deployed wireless devices. In device-free localization, the target carries no wireless devices, while the wireless infrastructure deployed in the environment determines the target's location by analyzing its impact on wireless signals. This article is intended to offer a comprehensive state-of-the-art survey on wireless indoor localization from the device perspective. In this survey, we review the recent advances in both modes by elaborating on the underlying wireless modalities, basic localization principles, and data fusion techniques, with special emphasis on emerging trends in (1) leveraging smartphones to integrate wireless and sensor capabilities and extend to the social context for device-based localization, and (2) extracting specific wireless features to trigger novel human-centric device-free localization. We comprehensively compare each scheme in terms of accuracy, cost, scalability, and energy efficiency. Furthermore, we take a first look at intrinsic technical challenges in both categories and identify several open research issues associated with these new challenges. [ABSTRACT FROM AUTHOR]

In this paper, we first propose a very interesting and practical problem, pattern matching in a distributed mobile environment. Pattern matching is a well-known problem and extensive research has been conducted for performing effective and efficient search. However, previous proposed approaches assume that data are centrally stored, which is not the case in a mobile environment (e.g., mobile phone networks), where one person's pattern could be separately stored in a number of different stations, and such a local pattern is incomplete compared with the global pattern. A simple solution to pattern matching over a mobile environment is to collect all the data distributed in base stations to a data center and conduct pattern matching at the data center afterwards. Clearly, such a simple solution will raise huge amount of communication traffic, which could cause the communication bottleneck brought by the limited wireless bandwidth to be even worse. Therefore, a communication efficient and search effective solution is necessary. In our work, we present a novel solution which is based on our well-designed weighted bloom filter (WBF), called, D istributed Incomplete pattern matching ( DI-matching), to find target patterns over a distributed mobile environment. Specifically, to save communication cost and ensure pattern matching in distributed incomplete patterns, we use WBF to encode a query pattern and disseminate the encoded data to each base station. Each base station conducts a local pattern search according to the received WBF. Only qualified IDs and corresponding weights in each base station are sent to the data center for aggregation and verification. Through non-trivial theoretical analysis and extensive empirical experiments on a real city-scale mobile networks data set, we demonstrate the effectiveness and efficiency of our proposed solutions. [ABSTRACT FROM PUBLISHER]

Reliable communications are essential for most applications in wireless sensor networks (WSNs). In traditional approaches, the per-hop and end-to-end (E2E) recovery schemes are widely used. These schemes, however, suffer from low E2E success rate and poor energy efficiency in large-scale real environments. Through empirical studies, in this paper we identify three major problems that hinder the efficient and reliable communications. To address these problems, we propose a novel in-middle recovery scheme and realize it by designing and implementing a proliferation routing. Proliferation routing integrates three core technologies, namely, capability-based path finder, a randomized dispersity, and reproduction. Proliferation routing offers great flexibilities for transmissions. It cannot only be applied with any Medium Access Control (MAC) protocols and routing metrics, but also obtains a desired service quality (i.e., transmission success rate, energy cost, etc.) by controlling the system parameters. To demonstrate the effectiveness of proliferation routing, we thoroughly analyze its performance. We also conduct performance evaluations through implementation experiments as well as simulations. In a specific experimental setup, proliferation routing can increase the E2E transmission success rate up to 80 percent compared with the well-known hop-based routing and flooding. [ABSTRACT FROM PUBLISHER]

Abstract: In a hybrid peer-to-peer (P2P) system, flooding and DHT are both employed for content locating. The decision to use flooding or DHT largely depends on the population of desired data. Previous works either use local information only, or do not consider dynamic factors of P2P systems. In this paper, we propose a Popularity Adaptive Search method for Hybrid (PASH) protocol. By dynamically estimating the content popularity, PASH properly selects search methods so as to efficiently saves query traffic cost and response time. We evaluate PASH through synthetic and trace-driven simulations. The results show that PASH outperforms existing approaches and it also scales well. [Copyright &y& Elsevier]

By combining an unstructured protocol with a DHT-based global index, hybrid peer-to-peer (P2P) improves search efficiency in terms of query recall and response time. The major challenge in hybrid search is how to estimate the number of peers that can answer a given query. Existing approaches assume that such a number can be directly obtained by computing item popularity. In this work, we show that such an assumption is not always valid, and previous designs cannot distinguish whether items related to a query are distributed in many peers or are in a few peers. To address this issue, we propose QRank, a difficulty-aware hybrid search, which ranks queries by weighting keywords based on term frequency. Using rank values, QRank selects proper search strategies for queries. We conduct comprehensive trace-driven simulations to evaluate this design. Results show that QRank significantly improves the search quality as well as reducing system traffic cost compared with existing approaches. [ABSTRACT FROM AUTHOR]

In order to provide scalable live streaming services, we propose an Interoverlay Optimization scheme, IOO. Instead of selecting better paths in the same overlay, IOO constructs efficient paths using peers in different overlays so as to 1) improve global resource utilization of peer-to-peer (P2P) streaming networks, 2) assign resources based on their locality and delay, 3) guarantee streaming service quality by using the nearest peers, even when such peers might belong to different overlays, and 4) balance the load among the group (streaming overlay) members. We compare the performance of IOO with existing approaches through trace-driven simulations. Results show that IOO outperforms previous schemes in terms of resource utilization and the quality of service (QoS) of streaming services. The IOO scheme has been implemented in an Internet-based live streaming system, called AnySee. AnySee was successfully released in the summer of 2004 in the China Educational Research Network (CERNET). More than 60,000 users enjoy massive entertainment programs, including TV programs, movies, and academic conferences videos. [ABSTRACT FROM AUTHOR]

Proposes a prototype of prioritized overlay multicast for manets in which participating nodes can carry out several different functions and thus be associated with more than one overlay tree. Description of the ad hoc multicast routing protocol; Outline of the proposed technique to improve the location-guided tree scheme; Improvements in location sensing techniques.

Presents a practical approach for providing quality of service in the Internet industry. Technical and economic aspects of the approach; Use of an efficient computer network design; Issues within a single network service provider.

Efficient and effective full-text retrieval in unstructured peer-to-peer networks remains a challenge in the research community. First, it is difficult, if not impossible, for unstructured P2P systems to effectively locate items with guaranteed recall. Second, existing schemes to improve search success rate often rely on replicating a large number of item replicas across the wide area network, incurring a large amount of communication and storage costs. In this paper, we propose BloomCast, an efficient and effective full-text retrieval scheme, in unstructured P2P networks. By leveraging a hybrid P2P protocol, BloomCast replicates the items uniformly at random across the P2P networks, achieving a guaranteed recall at a communication cost of O(\sqrtN), where N is the size of the network. Furthermore, by casting Bloom Filters instead of the raw documents across the network, BloomCast significantly reduces the communication and storage costs for replication. We demonstrate the power of BloomCast design through both mathematical proof and comprehensive simulations based on the query logs from a major commercial search engine and NIST TREC WT10G data collection. Results show that BloomCast achieves an average query recall of 91 percent, which outperforms the existing WP algorithm by 18 percent, while BloomCast greatly reduces the search latency for query processing by 57 percent. [ABSTRACT FROM PUBLISHER]

Counting the number of RFID tags (cardinality) is a fundamental problem for large-scale RFID systems. Not only does it satisfy some real application requirements, it also acts as an important aid for RFID identification. Due to the extremely long processing time, slotted ALOHA-based or tree-based arbitration protocols are often impractical for many applications, because tags are usually attached to moving objects and they may have left the readers interrogation region before being counted. Recently, estimation schemes have been proposed to count the approximate number of tags. Most of them, however, suffer from two scalability problems: time inefficiency and multiple-reading. Without resolving these problems, large-scale RFID systems cannot easily apply the estimation scheme as well as the corresponding identification. In this paper, we present the Lottery Frame (LoF) estimation scheme, which can achieve high accuracy, low latency, and scalability. LoF estimates the tag numbers by utilizing the collision information. We show the significant advantages, e.g., high accuracy, short processing time, and low overhead, of the proposed LoF scheme through analysis and simulations. [ABSTRACT FROM AUTHOR]

Intercontact time between moving vehicles is one of the key metrics in vehicular ad hoc networks (VANETs) and central to forwarding algorithms and the end-to-end delay. Due to prohibitive costs, little work has conducted experimental study on intercontact time in urban vehicular environments. In this paper, we carry out an extensive experiment involving thousands of operational taxies in Shanghai city. Studying the taxi trace data on the frequency and duration of transfer opportunities between taxies, we observe that the tail distribution of the intercontact time, that is, the time gap separating two contacts of the same pair of taxies, exhibits an exponential decay, over a large range of timescale. This observation is in sharp contrast to recent empirical data studies based on human mobility, in which the distribution of the intercontact time obeys a power law. By analyzing a simplified mobility model that captures the effect of hot areas in the city, we rigorously prove that common traffic influxes, where large volume of traffic converges, play a major role in generating the exponential tail of the intercontact time. Our results thus provide fundamental guidelines on design of new vehicular mobility models in urban scenarios, new data forwarding protocols and their performance analysis. [ABSTRACT FROM AUTHOR]