Search

Explosive shock wave protection is an important issue that urgently needs to be solved in the current military and public security safety fields. Non-metallic protective structures have the characteristics of being lightweight and having low secondary damage, making them an important research object in the field of equivalent protection. In this paper, the numerical simulation was performed to investigate the dynamic mechanical response of non-metallic annular protective structures under the internal blast, which were made by the continuous winding of PE fibers. The impact of various charges, the number of fiber layers, and polyurethane foam on the damage to protective structures was analyzed. The numerical results showed that 120 PE fiber layers could protect 50 g TNT equivalent explosives. However, solely increasing the thickness of fiber layers cannot effectively enhance the protection efficiency. By adding polyurethane foam in the inner layer, the stress acting on the fiber could be effectively reduced. A 30 mm thick polyurethane layer can reduce the equivalent stress of the fiber layer by 41.6%. This paper can provide some reference for the numerical simulations of non-metallic explosion protection structures. [ABSTRACT FROM AUTHOR]

Hydraulic fracturing stimulation technology is an effective method for increasing coalbed methane production, especially for coal seam with low permeability, low reservoir pressure and low gas saturation. Normally, fracture is simulated according to the law of equivalent percolation resistance, leading to the limit that fracture is several hundred times enlarged meanwhile the permeability is decreased, with wellbore located in the enlarged fracture, more fluids will produce through high conductive fracture path into wellbore. Based on theories and methods from oil–gas geology and mechanics of flow through porous media, this paper presents a two-phase, 3D flow and hydraulic fracturing model of dual-porosity media. A finite difference numerical model with independent fracture grid has been developed and applied successfully to a coalbed methane reservoir. Comparison results show that independent fracture grid is more effective than equivalent percolation resistance method in production fitting. Actual gas production data is consistent with results calculated by the new model, while prediction from equivalent percolation resistance is higher. [ABSTRACT FROM AUTHOR]

The unconventional reservoirs such as carbonate formation develops complex and diverse storage space structures, and it is composed of large-scale cavity, dissolved vug, and fractures. The carbonate reservoir is highly heterogeneous. Acid fracturing of carbonate reservoir is completed through the complex mechanical mechanism of interaction between vug and hydraulic fracture (HF). We use the equivalent method of reducing the rock strength by acid etching and serious fluid leakoff during interaction of HF and vug to establish a finite element (FE) model of HF propagation during acid fracturing in the fractured-vuggy carbonate reservoir. The model considers the effect of serious fluid leakoff during interaction between HF and vug, mechanism of interaction between HFs and the fracture-vug system, and change in acid etching intensity. Then, we carry out numerical simulation on impacts of injection rate, fluid viscosity, leakoff behavior in fractures and vugs, and natural fracture (NF) approaching angle on HF propagation in acid fracturing and compare the characteristics of injection pressure, fracture pressure, and HF size. It is suggested that the acid fracturing treatment should be operated by increasing the acid solution viscosity to reduce fluid leakoff, injecting fracturing fluid and acid fluid alternatively, increasing injection rate, and injecting fibers and ceramics when small pressure drop occurs during the HF interacts with the fracture-vug. When a large pressure drop occurs, it is suggested that the middle-low viscosity acid be injected at a low rate to etch the carbonate rock and enhance the fracture conductivity. HF propagates under higher pressure when the NF approaching angle is smaller. [ABSTRACT FROM AUTHOR]