Search

The cladding layer formed by laser cladding is formed by solidification of the molten pool. The quality of the cladding layer is directly determined by the evolution of the molten pool. The numerical simulation of the evolution of the molten pool is carried out, revealing the relationship between different powers and the evolution of the molten pool. The results show that the volume of the molten pool exhibits a nonlinear expansion of "expansion-shrinkage-re-expansion" before reaching the steady state, and the volume and expansion rate of the molten pool are determined by the laser power. In addition, the degree of shrinkage of the molten pool and the speed of convection can also be controlled by the laser power. When the laser power reaches a certain level, evaporation occurs on the surface of the molten pool. The convection pattern of the molten pool can be changed by evaporation. However, due to the impact of shielding gas and Marangoni movement, the effect of evaporation on the geometry of the cladding layer is limited. [ABSTRACT FROM AUTHOR]

Grinding process of particle reinforced metal matrix composites (PRMMCs) is extremely challenging due to the addition of hard particles. To reveal the material removal mechanism, a meso-scale numerical model for single grain grinding of TiC–Fe composites was established, considering the random particle distribution model and cohesive zone model. The simulated grinding forces and machined surface topography based on the proposed model show a similar trend and were consistent with the experimental results. The transition stage of ductile-brittle removal of TiC–Fe composites was explored. Results indicated that the grinding forces increase abruptly due to the obstruction of high-strength TiC particles and fluctuate periodically in the Fe matrix. The grinding forces decrease with the elevated grinding speed. Additionally, the material removal processes at different stages were studied and the removal modes mainly include: matrix plastic removal, particles wear, particles debonding, particles fracture, particles pull out. This paper provides significant guidance for the digitization and information construction of PRMMCs machining in enterprises and increases the economic benefits for the manufacturing industry. [ABSTRACT FROM AUTHOR]