Search

During underground mining excavation, dynamic disturbances (e.g., blasting) may accelerate rock creeping and induce unstable failure. It is crucial to properly quantify the impact of dynamic disturbances on creeping behavior to understand the long-term effects of underground excavation on rock media. A damage-based creep model was established in this study and implemented in Fast Lagrangian Analysis of Continua in 3D (FLAC3D) to quantify the damage and unstable failure of creeping rock triggered by dynamic disturbance. This model reveals the mechanical behavior of rock under creep-impact loading. It was verified by calculating the viscoelastic deformation around circular excavation, by reproducing the damage process under static loading, and by simulating the rock damage and failure under creep-impact loading. The model was then used to examine the mining-induced creep deformation around an operational shaft in Xincheng Gold Mine, China, where both the mining-induced creep of the country rock mass and dynamic disturbance of blast-induced vibration were considered. Numerical simulation indicated that the dynamic disturbance could accelerate the damage of rock under creep stress, which may be an important factor to trigger the accelerating creep of rock, even though the unstable failure of rock lagged behind the dynamic disturbance. The case study on the shaft stability analysis indicated that the dynamic disturbance could accelerate the time-dependent deformation of the shaft, the first dynamic disturbance induced much more shaft deformation, while in long-term creep (e.g., 5 years), the effect of blasting vibration was not significant. The trend and magnitude of shaft deformation agreed with the in situ measurements, which indicates that the numerical simulation could be used to predict the long-term shaft deformation in future. [ABSTRACT FROM AUTHOR]

The stress state in backfilled mine stopes is an important issue to assess the behavior of the interaction between the backfill and the surroundings or barricades. Most previous arching analyses have considered only the vertical backfilled stopes in both 3D and 2D conditions, and the 3D stress distribution that results from the arching effect in inclined mine stopes remains unclear. In this paper, based on the limit equilibrium theory, a 3D stress solution that is applicable to vertical and inclined backfilled stopes is proposed to further examine the arching effect. The solution is validated against an available centrifuge model by changing the inclination of the model. The proposed analytical solution is consistent with the numerical simulations, and it is suggested that neglecting the wall inclination causes one to underestimate the arching phenomenon. In other words, the vertical stresses at the bottom of the stope can decrease when the wall inclination is considered. Hence, when the stope is assumed in plain strain conditions, both the vertical and horizontal stresses exerted on the barricades are overestimated. [ABSTRACT FROM AUTHOR]

During underground hard-rock mining, the drilling and blasting method currently remains the most economical excavation method, and the rock may experience a multistrain-rate spectrum under quasi-static, dynamic, and rheological loading conditions and their combination as well. The study on the damage mechanism of rock under multistrain-rate condition that induced by mining excavation is the fundamental issue for predicting the mining-induced hazards such as rockburst. In this study, the state of the art of rock damage and failure under different strain rates is reviewed first. Then, the numerical model for rock failure under multiple strain rates is formulated when the rock damage is taken as the main thread. Meanwhile, we summarize our work in this area over the past ten years, and the constitutive law for the damage and failure of rock under multistrain rates is presented. Finally, several numerical examples, i.e., rock damage and failure under combined static and dynamic load, rock damage and failure triggered by dynamic stress redistribution due to excavation, rock damage and failure induced by blasting, and rock damage and failure due to the combination of dynamic disturbance and rheological load, are presented. Based on these numerical simulations, the associated rock damage mechanism and failure behaviors under differently combined multiple strain rates are clarified, which may provide a theoretical basis for clarifying the rock failure mechanism during rockbursts and rock blasting. Also, further studies on the damage and failure of rock under multiple strain rates are suggested. [ABSTRACT FROM AUTHOR]

Mining of ore body in the vicinity of a shaft has a significant influence on its stability. The in situ monitoring and numerical simulation are employed to analyze the effect of shaft pillar extraction at Xincheng Gold Mine. The XI# ore body is recently found around and beneath the shaft, and mining in this area may be detrimental to the shaft. Firstly, on the base of geological survey and in situ displacement monitoring, mechanical parameters of rock mass are obtained and the displacement around the shaft is measured. Secondly, the sensitivities of five main factors that may affect the shaft displacement are analyzed by means of orthogonal experiment according to the numerical simulation with FLAC3D. Finally, a numerical model is established according to the in situ condition; in order to forecast the shaft displacement induced by mining activities of XI# orebody, the Mining Priority Index (MPI) is put forward and used to select the optimal mining sequence. Based on the comparison between the numerical results with the monitoring data, it is determined that the ore within 100 m from the shaft is not suggested to be extracted until the last period of the shaft life. [ABSTRACT FROM AUTHOR]

As jointed rocks consist of joints embedded within intact rock blocks, the presence and geometrical fabric of joints have a great influence on the mechanical behavior of rock. With consideration of the actual spatial shape of joints, a numerical model is proposed to investigate the fracture evolution mechanism of jointed rocks. In the proposed model, computerized tomography (CT) scanning is first used to capture the microstructure of a jointed sandstone specimen, which is artificially fabricated by loading the intact sample until the residual strength, and then digital image processing (DIP) techniques are applied to characterize the geometrical fabric of joints from the CT images. A simple vectorization method is used to convert the microstructure based on a cross-sectional image into a layer of 3-D vectorized microstructure and the overall 3-D model of the jointed sandstone including the real spatial shape of the joints is established by stacking the layers in a specific sequence. The 3-D model is then integrated into a well-established code [three-dimensional Rock Failure Process Analysis, (RFPA3D)]. Using the proposed model, a uniaxial compression test of the jointed sandstone is simulated. The results show that the presence of joints can produce tensile stress zones surrounding them, which result in the fracture of jointed rocks under a relatively small external load. In addition, the spatial shape of the joints has a great influence on the fracture process of jointed rocks. [ABSTRACT FROM AUTHOR]

The behaviour of rock mass is governed by the properties of the intact rock, the joints and the water conditions. Moreover, this behaviour is also influenced by the temporal and spatial damage evolution patterns of the rock. Thus, in this study, an approach that couples joints, water and microseismicity is proposed to model rock engineering problems. Joints are used to reduce the global properties of the rock mass, water is used to reduce the local properties of the rock mass, and microseismicity are used to reduce the point properties of the rock mass. Using data from the Shirengou iron mine, the effects of water and joints on the properties of rock masses were investigated, and a representative elementary volume of rock mass was determined. Then, a coupled fluid–solid numerical model was established to simulate the evolution of rock mass damage while considering the effects of joints and water. Finally, an inversion model of rock damage based on microseismic moment tensor was proposed. A numerical simulation of rock mass damage that couples joints, water and microseismicity was performed. The rock mass damage mechanism was then analysed. Joints and water were found to significantly affect the damage zones. The rock mass damage estimate would not be accurate without considering the effects of joints and water. Thus, water was the critical factor in the studied damage pattern. Further integration of microseismic data aided in modifying the numerical results and in predicting the damage development. The proposed approach can efficiently assess rock mass damage evolution and provide a basis for rock support. [ABSTRACT FROM AUTHOR]