Search

Concrete pavement performance models are evaluated, calibrated, and validated using field data from databases like the Long-Term Pavement Program. Conceptually, performance model predictions should match field data considering a reliability of 50%; that is, there is a 50% probability that the predictions of a certain distress indicator are higher or lower than the field data. However, modern pavements are designed for higher levels of reliability (usually 90% to 95%). Local performance model evaluation for higher levels of reliability requires a high amount of field data that traditional databases lack. Pavement management system (PMS) databases can be a useful resource for high reliability model analysis because of the large amount of data collected locally and regularly. However, when selecting and filtering field databases (of any source), the effect of censored performance data due to rehabilitation, removal from service, or modification of pavement sections is usually ignored. This paper proposes an approach for the use of PMS databases accounting for censored performance data to evaluate the accuracy of performance models' high reliability predictions. The approach is exemplified using a PMS transverse joint faulting database. Results show that by addressing the "survival issue," i.e., accounting for the censored performance data, the resulting PMS-based reliability model improves the faulting model accuracy in matching the field data for high reliability levels. [ABSTRACT FROM AUTHOR]

Concrete pavements develop cracks with the accumulation of fatigue damage caused by the combined effect of vehicular and environmental loadings. In Mechanistic-Empirical (ME) design, the ratio of stresses to some measure of strength is used to evaluate incremental damage, which is then related to cracking. Typically, this measure is the Modulus of Rupture (MOR) of a beam made of the same material. The flexural strength is also known to vary with the thickness of the beam. However, the variation of flexural strength due the presence of eigenstresses from temperature or moisture distributions has not received sufficient attention. A non-linear fracture mechanics model demonstrated that the thickness-adjusted flexural strength can also be used for characterising the maximum elastic stress under a linear temperature distribution. However, under a non-linear temperature distribution, the material may sustain a higher or lower maximum elastic stress than the flexural strength. To model this, a practical analytical expression for the apparent flexural strength was derived and showed excellent agreement with numerical simulations as well as with a model based on equivalent elastic deformation energy. The model was used to show that the fatigue capacity under a typical axle load varies with various non-linear temperature distributions. [ABSTRACT FROM AUTHOR]

During concrete pavement construction, comprehensive information on concrete strength development is necessary for knowledgeable scheduling decisions. To improve in situ strength estimation, nondestructive tests can be combined to maximize available information and increase collection efficiency. Ultrasonic testing has a higher accuracy in strength estimation for early age concrete and the external device allows for more data to be easily collected, while maturity testing can use temperature models to predict strength development. A procedure was created that combines these methods and their strength models in the laboratory for improved and increased field strength data. Using the procedure allows more data to be collected with greater accuracy and provides an adjustable, predicted strength development. This improves the efficiency of fast-track construction projects without resorting to costly alternatives by providing more information on strength development of in situ concrete than traditional strength testing or nondestructive methods individually. [ABSTRACT FROM AUTHOR]

Continuously reinforced concrete pavement (CRCP) is a widely used alternative for heavy traffic highways due to good performance and low maintenance needs. Recently, the use of short length CRCP (50-m long slabs) has been proposed for bus stops and terminals. This paper examines the structural behaviour of cracks in short CRCP. This includes analysis of the Falling Weight Deflectometer (FWD) deflections and strain gauge measurements obtained from the full-scale test sections as well as structural modelling of the pavement. An evaluation of the influence of cracks on the FWD deflection basins collected on the experimental short CRCP pavement along with FWD data collected under the Long-Term Pavement Performance programme for conventional CRCP resulted in similar behaviour between the short and conventional CRCP. Therefore, the effects of the short CRCP transverse cracks on stresses were investigated. Three ISLAB2000 models differed by the concrete base or crack model were developed and their stress predictions were compared with field stresses. An applicability of the conventional aggregate interlock model for describing the behaviour of short CRCP was evaluated as only the continuous slab (no cracks) model was able to match the field stresses. A need for re-appraisal of the PavementME structural model is also discussed. [ABSTRACT FROM AUTHOR]

A majority of existing permeable pavement installations are related to parking lots and commercial areas with low speeds and light traffic loads. During the past two decades, a tremendous amount of progress has been made with regard to the application of permeable pavements regarding mix design, hydrologic design, water quality assessment and maintenance requirements. Review of the literature revealed, however, that there are still many important questions that must be answered before permeable pavements can be fully integrated in urban roads, especially in highways with high speeds and loads. This paper summarises the major research progress in the above listed areas and identifies research needs. Research needs are summarised under four topics: (1) structural and materials property, (2) hydrologic performance, (3) water quality and (4) maintenance. Research needs are further organised based on their immediate, short-term and long-term impact. [ABSTRACT FROM AUTHOR]

Functionality of concrete pavements can be restored through conventional diamond grinding (CDG) that improves ride quality and friction. Recently, an alternative diamond grinding configuration was proposed by the Institute for Safe Quiet and Durable Highway at Purdue University as part of a nationwide interest in quiet pavements. This paper discusses the field-testing of the CDG and alternative (innovative) diamond grinding as well as the pre-existing transverse tined (TT) texture at the MnROAD research facility. Acoustic properties, ride quality and friction performance of the diamond ground surfaces are compared to data obtained in the pre-existing TT surface. The initial performance of the innovative grind over a period of 3 years is also compared to that of the conventional grind and the TT surface. Test results, analysis, merits and demerits of the grinding types are also accentuated. [ABSTRACT FROM AUTHOR]

Dowel bars are used at transverse joints in concrete pavements to provide load transfer, reduce faulting and improve joint performance. However, a misaligned dowel may adversely affect the performance of a joint and cause distresses in the pavement. This paper presents development, calibration, validation and application of a finite element model for behaviour analysis of various types of dowel misalignment. The model permitted extension of the laboratory testing factorial, and the results were used to quantify the effects of concrete cover and embedment length. [ABSTRACT FROM AUTHOR]

In practice, it has been observed that the method of pervious concrete void maintenance depends on which machines or vehicles the owners have available. This research compares the abilities of three common municipal utility vehicles-a vacuum truck with a flexible, 200-mm (8-in.) hose; a vacuum street sweeper; and a regenerative air street sweeper-to remove clogging material from the voids of in-service pervious concrete pavements. By using optical microscopy, it was found that clogging materials rarely migrate into voids deeper than 12.7 mm (1/2 in.) from the surface. Furthermore, all three machines were able to remove clogging materials that were located within 3.18 mm (1/8 in.) of the surface. The clogging material that was located deeper than 3.18 mm (1/8 in.) remained within the voids but was likely disturbed by either the suction or the forced air of the maintenance vehicles. [ABSTRACT FROM AUTHOR]

Dowels are inserted at the mid-depth of joints in jointed concrete pavements that are exposed to heavy loading to provide load transfer and reduce pumping and faulting. Dowel alignment tolerances in North America have traditionally been strict, although not based on substantial performance data. In this paper, new laboratory testing methods are proposed for evaluation of the effects of dowel misalignment on concrete joint behavior. In these tests, dowels with various levels of rotations and translations were subjected to pullout and shear loading. It was found that dowel misalignment does not have a significant effect on pullout and shear forces for certain ranges of misalignments, which far exceed the tolerances recommended by the Federal Highway Administration. At the same time, it was found that extreme cases and combinations of misalignment resulted in a significant decrease in initial stiffness and shear capacity. Therefore, there is a need for the establishment of rational alignment tolerances. The results of this study provide important information for the development of such tolerances. [ABSTRACT FROM AUTHOR]

An existing finite element program—ISLAB2000—was modified to allow for the analysis of horizontally restrained and unrestrained portland cement concrete (PCC) pavement slabs with partial depth cracks. To simulate a partial-depth crack, special line spring elements were added to the ISLAB2000 finite element code. Previously published relationships between spring elements stiffness and crack depth were used for formulating the element stiffness matrix of the line spring elements and to calculate stress intensity factors after solving the system of finite element equations.Several example problems of partially cracked PCC slabs subject to typical highway loadings were solved to verify this newly developed finite element model termed ISLAB2005. The impact of crack depth and base friction parameters on slabs stresses and deflections was investigated. On the basis of this analysis, ISLAB2005 was found to be a reliable tool for analysis of partially cracked pavements that are either restrained or unrestrained from horizontal movements. [ABSTRACT FROM AUTHOR]

It is commonly recognized that non-uniformity of as-constructed Portland Cement Concrete (PCC) pavement may negatively affect long-term pavement performance. Conventional wisdom states that PCC thickness deficiency is the most important factor causing premature pavement failures. To address it, transportation agencies often impose strict penalties for not meeting the designed slab thickness requirements, thus contractors build slightly thicker slabs to avoid fines. However, other aspects of construction variability on pavement performance are mostly ignored by studies because conventional methods for construction uniformity assessment fail to provide sufficient information to quantify their effect. This study utilized a non-destructive ultrasonic test to evaluate in-situ pavement construction variability. To investigate the correlation between construction variability and surface distresses, a combination of non-destructive ultrasonic thickness measurements and visual distress surveys were performed in highways prior to rehabilitation. PCC slab thicknesses and shear wave velocities were computed from recorded ultrasound signals. An in-depth statistical analysis was performed to investigate possible relations between thickness or shear wave velocity and distresses using various pavement performance parameters. The main results of this analysis illustrate the importance of material quality and uniformity control during construction, since alterations in material properties significantly influence the presence of distresses. Shear wave velocity variations significantly correlate to cracked and broken slab panels in two sections, and, more importantly, to any type of distress in all tested pavement sections. [ABSTRACT FROM AUTHOR]