Search

Abstract: A visualization study is conducted to investigate condensation flow in wide rectangular silicon microchannels with the hydraulic diameter of 90.6 μm and width/depth ratio of 9.668. Droplet-annular compound flow, injection flow, and vapor slug-bubbly flow are observed along the channel, which differ from that in other cross-sectional shape microchannels. In the droplet-annular compound flow region, the vertical walls (short side) of the channel are completely covered by the condensate, while droplet condensation still exists on the horizontal wall (long side) of the channel. The location of the injection flow will be postponed with the increasing inlet vapor Reynolds number. The injection frequency will increase with the increasing inlet vapor Reynolds number and condensate Weber number. More specifically, the frequency in the wide rectangular microchannels is lower than that in triangular microchannels having the same hydraulic diameter. It is confirmed that the cross-sectional shape of the microchannel plays a significant role on the instability of condensation flow. In addition, the correlation of Nusselt number is also presented. [Copyright &y& Elsevier]

Abstract: A steady one-dimensional model for annular condensation flow in triangular microchannels is developed. The curvature radius distribution of the condensate stream along the channel has been determined numerically. The results indicate that the curvature radius of the liquid phase would increase rapidly at the beginning, and then as the condensation process progresses along the length of the microchannels, the radius increase would proceed more slowly. At the end of the condensation flow, the radius increases rapidly again. A smaller contact angle and heat flux or a larger hydraulic diameter and steam pressure will all result in a longer condensation length. [Copyright &y& Elsevier]

Abstract: A visualization experiment is conducted to investigate the condensation of steam in a series of triangular silicon microchannels. The results indicate that droplet, annular, injection and slug-bubbly flow are the dominant flow patterns in these triangular silicon microchannels. With increased mass flow rate, or an increase in the hydraulic diameter under the same Reynolds number, the location at which the injection occurred is observed to move towards the channel outlet. The frequency of the injection increases, i.e. the flow of condensation instability is higher with increased inlet vapor Reynolds number, condensate Weber number and the prolongation of the injection location, or with a decrease in the hydraulic diameter of the channel. In addition, the wall temperature of the channel decreases along the condensation stream. The total pressure drop, the average condensation heat transfer coefficient and the average Nusselt number are observed to be larger with increased inlet vapor Reynolds number. Moreover, it is found that the condensation heat transfer is enhanced by a reduction in the channel scale. [Copyright &y& Elsevier]