Search

Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate., Comment: 4 figures in main text, 21 figures in Supp. Info

In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 {\deg}C gradually converts it into TiO$_2$, a semiconductor with a wide bandgap of 3.2 eV with ap-plications in photo-electrochemistry and catalysis. In this work, we investigate the controlled thermal oxidation of individual TiS$_3$ nanoribbons and its influence on the optoelectronic properties of TiS$_3$-based photodetectors. We observe a step-wise change in the cut-off wavelength from its pristine value ~1000 nm to 450 nm after subjecting the TiS$_3$ devices to subsequent thermal treatment cycles. Ab-initio and many-body calculations confirm an increase in the bandgap of titanium oxysulfide (TiO$_{2-x}$S$_x$) when increasing the amount of oxygen and reducing the amount of sulfur., Comment: 7 figures in main text, 9 figures in supp. info

We have studied electrical transport as a function of carrier density, temperature and bias in multi-terminal devices consisting of hexagonal boron nitride (h-BN) encapsulated titanium trisulfide (TiS$_3$) sheets. Through the encapsulation with h-BN, we observe metallic behavior and high electron mobilities. Below $\sim$60 K an increase in the resistance, and non-linear transport with plateau-like features in the differential resistance are present, in line with the expected charge density wave (CDW) formation. Importantly, the critical temperature and the threshold field of the CDW phase can be controlled through the back-gate.

The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector based on a mixed-dimensionality TiS3/Si p-n junction. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350 % and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization sensitive systems such as polarimeters., Comment: 6 main text figures, 1 figure. Includes the supporting information (18 supp. info. figures)

TiS3 nanosheets have proven to be promising candidates for ultrathin optoelectronic devices due to their direct narrow band-gap and the strong light-matter interaction. In addition, the marked in-plane anisotropy of TiS3 is appealing for the fabrication of polarization sensitive optoelectronic devices. Herein, we study the optical contrast of TiS3 nanosheets of variable thickness on SiO2/Si substrates, from which we obtain the complex refractive index in the visible spectrum. We find that TiS3 exhibits very large birefringence, larger than that of well-known strong birefringent materials like TiO2 or calcite, and linear dichroism. These findings are in qualitative agreement with ab initio calculations that suggest an excitonic origin for the birefringence and linear dichroism of the material.

The isolation of graphene and transition metal dichalcongenides has opened a veritable world to a great number of layered materials which can be exfoliated, manipulated, and stacked or combined at will. With continued explorations expanding to include other layered materials with unique attributes, it is becoming clear that no one material will fill all the post-silicon era requirements. Here we review the properties and applications of layered, quasi-one dimensional transition metal trichalcogenides (TMTCs) as novel materials for next generation electronics and optoelectronics. The TMTCs present a unique chain-like structure which gives the materials their quasi-one dimensional properties such as high anisotropy ratios in conductivity and linear dichroism. The range of band gaps spanned by this class of materials (0.2 eV- 2 eV) makes them suitable for a wide variety of applications including field-effect transistors, infrared, visible and ultraviolet photodetectors, and unique applications related to their anisotropic properties which opens another degree of freedom in the development of next generation electronics. In this review we survey the historical development of these remarkable materials with an emphasis on the recent activity generated by the isolation and characterization of atomically thin titanium trisulfide (TiS3)., Comment: Topical review of the properties and applications of the transition metal trichalcogenides (TMTCs)

We present characterizations of few-layer titanium trisulfide (TiS3) flakes which, due to their reduced in-plane structural symmetry, display strong anisotropy in their electrical and optical properties. Exfoliated few-layer flakes show marked anisotropy of their in-plane mobilities reaching ratios as high as 7.6 at low temperatures. Based on the preferential growth axis of TiS3 nanoribbons, we develop a simple method to identify the in-plane crystalline axes of exfoliated few-layer flakes through angle resolved polarization Raman spectroscopy. Optical transmission measurements show that TiS3 flakes display strong linear dichroism with a magnitude (transmission ratios up to 30) much greater than that observed for other anisotropic two-dimensional (2D) materials. Finally, we calculate the absorption and transmittance spectra of TiS3 in the random-phase-approximation (RPA) and find that the calculations are in good agreement with the observed experimental optical transmittance., Comment: 18 pages, 4 figures, including Supporting Information (6 pages, 6 figures)

Control over the morphology of TiS3 is demonstrated by synthesizing 1D nanoribbons and 2D nanosheets. The nanosheets can be exfoliated down to a single layer. Through extensive characterization of the two morphologies, differences in the electronic properties are found and attributed to a higher density of sulphur vacancies in nanosheets which, according to density functional theory calculations, leads to an n-type doping., Comment: 28 pages, 4 figures, 1 table. Includes Supporting Information (9 figures, 2 tables)

The potential of bulk black-phosphorus for thermoelectric applications has been experimentally studied. The Seebeck Coefficient (S) has been measured in the temperature range from 300 K to 385 K, finding a value of S = +335 +- 10 uV/K at room temperature (indicating a naturally occurring p-type conductivity). S increases with temperature, as expected for p-type semiconductors, which can be attributed to an increase of the charge carrier density. The electrical resistance drops up to a 40 % while heating in the studied temperature range. As a consequence, the power factor at 385 K is 2.7 times higher than that at room temperature. This work demonstrates the feasibility of black-phosphorus in thermoelectric applications, such as thermal energy scavenging, which typically require devices with high performance at temperatures above room temperature., Comment: 3 figures

Here, we isolate thin TiS3 ribbons, a layered direct band gap semiconductor (1.1 eV, well suited for detection all across the visible spectrum), thus far almost unexplored. We fabricate field effect transistors and study their electrical characteristics and optoelectronic properties. The measured FET characteristics show mobilities up to 2.6 cm^2/Vs and ON/OFF ratios up to 10^4. Under illumination, the TiS3 NR-FETs present an ultrahigh photoresponse of 2910 A/W and fast rise/fall times of ~4 ms. In addition, we measure cutoff frequencies (f3dB) up to 1000 Hz. The strong combination of ultrahigh sensitivity all along the visible spectrum and fast time response of TiS3 nanoribbon transistors put them among the best nanoscale photodetectors to date., Comment: 4 Figures + 1 Table. It also includes Supp. Info. (5 Figures + 3 Tables)