Search

Colloidal perovskite quantum dots (PQDs) are an exciting platform for on-demand quantum, and classical optoelectronic and photonic devices. However, their potential success is limited by the extreme sensitivity and low stability arising from their weak intrinsic lattice bond energy and complex surface chemistry. Here we report a novel platform of buried perovskite quantum dots (b-PQDs) in a three-dimensional perovskite thin-film, fabricated using one-step, flash annealing, which overcomes surface related instabilities in colloidal perovskite dots. The b-PQDs demonstrate ultrabright and stable single-dot emission, with resolution-limited linewidths below 130 {\mu}eV, photon-antibunching (g^2(0)=0.1), no blinking, suppressed spectral diffusion, and high photon count rates of 10^4/s, consistent with unity quantum yield. The ultrasharp linewidth resolves exciton fine-structures (dark and triplet excitons) and their dynamics under a magnetic field. Additionally, b-PQDs can be electrically driven to emit single photons with 1 meV linewidth and photon-antibunching (g^2(0)=0.4). These results pave the way for on-chip, low-cost single-photon sources for next generation quantum optical communication and sensing., Comment: 26 pages, 4 figures

In 1964, Keldysh laid the groundwork for strong-field physics in atomic, molecular, and solid-state systems by delineating a ubiquitous transition from multiphoton absorption to quantum electron tunneling under intense AC driving forces. While both processes in semiconductors can generate carriers and result in photon emission through electron-hole recombination, the low quantum yields in most materials have hindered direct observation of the Keldysh crossover. Leveraging the large quantum yields of photoluminescence in lead halide perovskites, we show that we can not only induce bright light emission from extreme sub-bandgap light excitation but also distinguish between photon-induced and electric-field-induced processes. Our results are rationalized by the Landau-Dykhne formalism, providing insights into the non-equilibrium dynamics of strong-field light-matter interactions. These findings open new avenues for light upconversion and sub-bandgap photon detection, highlighting the potential of lead halide perovskites in advanced optoelectronic applications.

We report temperature-dependent spectroscopy on the layered (n=4) two-dimensional (2D) Ruddlesden-Popper perovskite (BA)(MA)PbI. Helicity-resolved steady-state photoluminescence (PL) reveals no optical degree of polarization. Time-resolved PL shows a photocarrier lifetime on the order of nanoseconds. From simultaneaously recorded time-resolved differential reflectivity (TR$\Delta$R) and time-resolved Kerr ellipticity (TRKE), a photocarrier lifetime of a few nanoseconds and a spin dephasing time on the order of picoseconds was found. This stark contrast in lifetimes clearly explains the lack of spin polarization in steady-state PL. While we observe clear temperature-dependent effects on the PL dynamics that can be related to structural dynamics, the spin dephasing is nearly T-independent. Our results highlight that spin dephasing in 2D (BA)(MA)PbI occurs at time scales faster than the exciton recombination time, which poses a bottleneck for applications aimingto utilize this degree of freedom.

Excitons, bound electron-hole pairs, in Two-Dimensional Hybrid Organic Inorganic Perovskites (2D HOIPs) are capable of forming hybrid light-matter states known as exciton-polaritons (E-Ps) when the excitonic medium is confined in an optical cavity. In the case of 2D HOIPs, they can self-hybridize into E-Ps at specific thicknesses of the HOIP crystals that form a resonant optical cavity with the excitons. However, the fundamental properties of these self-hybridized E-Ps in 2D HOIPs, including their role in ultrafast energy and/or charge transfer at interfaces, remain unclear. Here, we demonstrate that > 0.5 um thick 2D HOIP crystals on Au substrates are capable of supporting multiple-orders of self-hybridized E-P modes. These E-Ps have high Q factors (> 100) and modulate the optical dispersion for the crystal to enhance sub-gap absorption and emission. Through varying excitation energy and ultrafast measurements, we also confirm energy transfer from higher energy upper E-Ps to lower energy, lower E-Ps. Finally, we also demonstrate that E-Ps are capable of charge transport and transfer at interfaces. Our findings provide new insights into charge and energy transfer in E-Ps opening new opportunities towards their manipulation for polaritonic devices., Comment: 5 figures plus supporting information

Two-dimensional (2D) halide perovskites have emerged as semiconductor platforms for realizing efficient and durable optoelectronic devices. However, the reproducible synthesis of 2D perovskite crystals with desired layer thickness (or n value) greater than 2, has been an enduring challenge due to the lack of kinetic control (temperature, time, stoichiometry) for each layer thickness. Here, we demonstrate a novel method term as the kinetically controlled space confinement (KCSC) for the deterministic growth of phase pure Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) 2D perovskites. The phase-pure growth was achieved by progressively increasing the temperature (fixed time) or the crystallization time (fixed temperature), which allowed for an acute control of the crystallization kinetics. We also observe a systematic transformation from a lower n-value to n=3, 4, 5, 6 in 2D perovskites. In-situ photoluminescence spectroscopy and imaging suggest that the progressive transformation from lower to higher n-value occurs via intercalation of excess precursor ions. These experiments enabled the development of a machine learning assisted multi-parameter phase diagram, which predicts the growth of 2D phase with a specific n-value., Comment: 32 pages, 15 figures

Direct visualization of ultrafast coupling between charge carriers and lattice degrees of freedom in photo-excited semiconductors has remained a long-standing challenge and is critical for understanding the light-induced physical behavior of materials under extreme non-equilibrium conditions. Here, by monitoring the evolution of the wave-vector resolved ultrafast electron diffraction intensity following above-bandgap photo-excitation, we obtain a direct visual of the structural dynamics in monocrystalline 2D perovskites. Analysis reveals a surprising, light-induced ultrafast lattice ordering resulting from a strong interaction between hot-carriers and the perovskite lattice, which induces an in-plane octahedra rotation, towards a more symmetric phase. Correlated ultrafast spectroscopy performed at the same carrier density as ultrafast electron diffraction reveals that the creation of a hot and dense electron-hole plasma triggers lattice ordering at short timescales by modulating the crystal cohesive energy. Finally, we show that the interaction between the carrier gas and the lattice can be altered by tailoring the rigidity of the 2D perovskite by choosing the appropriate organic spacer layer., Comment: 25 pages, 4 figures

Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are promising candidates for optoelectronic applications due to their efficient light emission properties, and strong dielectric confinement effects. Raman spectroscopy is a versatile, non-contact and often non-destructive technique, widely used to characterize crystalline materials. However, the inherently weak phonon scattering, strong background, and complex nature of the Raman signals from HOIPs present challenges in obtaining reliable signals. Further, the fragile nature of the 2D HOIP crystals results in rapid degradation upon exposure to heat, light and moisture, which presents further difficulty in enhancing Raman scattered photon signals. Herein, we report a novel approach to enhance the weak Raman scattering signals in Ruddlesden-Popper (RP) phase HOIPs by introducing an open-cavity comprising HOIP crystals on a gold substrate. We observe 15x enhancement of the Raman signals due to the Purcell effect inside the high-index HOIP crystals. Our simple approach can be extended to enhance the study of phonon scattering in other HOIP and van der Waals layered crystals., Comment: 4 figures + supporting

Light-matter coupling in excitonic materials has been the subject of intense investigation due to emergence of new excitonic materials. Two-dimensional layered hybrid organic/inorganic perovskites (2D HOIPs) support strongly bound excitons at room-temperatures with some of the highest oscillator strengths and electric loss tangents among the known excitonic materials. Here, we report strong light-matter coupling in Ruddlesden-Popper phase 2D-HOIPs crystals without the necessity of an external cavity. We report concurrent occurrence of multiple-orders of hybrid light-matter states via both reflectance and luminescence spectroscopy in thick (> 100 nm) crystals and near-unity absorption in thin (< 20 nm) crystals. We observe resonances with quality factors > 250 in hybridized exciton-polaritons and identify a linear correlation between exciton-polariton mode splitting and extinction coefficient of the various 2D-HOIPs. Our work opens the door to studying polariton dynamics in self-hybridized and open cavity systems with broad applications in optoelectronics and photochemistry.

We compare three representative high performance PV materials: halide perovskite MAPbI3, CdTe, and GaAs, in terms of photoluminescence (PL) efficiency, PL lineshape, carrier diffusion, and surface recombination, over multiple orders of photo-excitation density. An analytic model is used to describe the excitation density dependence of PL intensity and extract the internal PL efficiency and multiple pertinent recombination parameters. A PL imaging technique is used to obtain carrier diffusion length without using a PL quencher, thus, free of unintended influence beyond pure diffusion. Our results show that perovskite samples tend to exhibit lower Shockley-Read-Hall (SRH) recombination rate in both bulk and surface, thus higher PL efficiency than the inorganic counterparts, particularly under low excitation density, even with no or preliminary surface passivation. PL lineshape and diffusion analysis indicate that there is considerable structural disordering in the perovskite materials, and thus photo-generated carriers are not in global thermal equilibrium, which in turn suppresses the nonradiative recombination. This study suggests that relatively low point-defect density, less detrimental surface recombination, and moderate structural disordering contribute to the high PV efficiency in the perovskite. This comparative photovoltaics study provides more insights into the fundamental material science and the search for optimal device designs by learning from different technologies.

We report successful deposition of high quantum efficiency (QE) bialkali antimonide K2CsSb photocathodes on graphene films. The results pave a pathway towards an ultimate goal of encapsulating technologically-relevant photocathodes for accelerator technology with an atomically-thin protecting layer to enhance lifetime while minimizing QE losses. A QE of 17 % at ~3.1 eV (405 nm) is the highest value reported so far on graphene substrates and is comparable to that obtained on stainless steel and nickel reference substrates. The spectral responses of the photocathodes on graphene exhibit signature features of K2CsSb including the characteristic absorption at ~2.5 eV. Materials characterization based on X-ray fluorescence (XRF) and X-ray diffraction (XRD) reveals that the composition and crystal quality of these photocathodes deposited on graphene is comparable to those deposited on a reference substrate. Quantitative agreement between optical calculations and QE measurements for the K2CsSb on free suspended graphene and a graphene coated metal substrate further confirms the high quality interface between the photocathodes and graphene. Finally, a correlation between the QE and graphene quality as characterized by Raman spectroscopy suggests that a lower density of atomistic defects in the graphene films leads to higher QE of the deposited K2CsSb photocathodes., Comment: accepted to Advanced Materials Interfaces

The hexagonal structure of graphene gives rise to the property of gas impermeability, motivating its investigation for a new application: protection of semiconductor photocathodes in electron accelerators. These materials are extremely susceptible to degradation in efficiency through multiple mechanisms related to contamination from the local imperfect vacuum environment of the host photoinjector. Few-layer graphene has been predicted to permit a modified photoemission response of protected photocathode surfaces, and recent experiments of single-layer graphene on copper have begun to confirm these predictions for single crystal metallic photocathodes. Unlike metallic photoemitters, the integration of an ultra-thin graphene barrier film with conventional semiconductor photocathode growth processes is not straightforward. A first step toward addressing this challenge is the growth and characterization of technologically relevant, high quantum efficiency bialkali photocathodes grown on ultra-thin free-standing graphene substrates. Photocathode growth on free-standing graphene provides the opportunity to integrate these two materials and study their interaction. Specifically, spectral response features and photoemission stability of cathodes grown on graphene substrates are compared to those deposited on established substrates. In addition we observed an increase of work function for the graphene encapsulated bialkali photocathode surfaces, which is predicted by our calculations. The results provide a unique demonstration of bialkali photocathodes on free-standing substrates, and indicate promise towards our goal of fabricating high-performance graphene encapsulated photocathodes with enhanced lifetime for accelerator applications., Comment: 21 pages, 5 figures, accepted to npj 2D Materials and Applications

We report valence band electronic structure evolution of graphene oxide (GO) upon its thermal reduction. Degree of oxygen functionalization was controlled by annealing temperatures, and an electronic structure evolution was monitored using real-time ultraviolet photoelectron spectroscopy. We observed a drastic increase in density of states around the Fermi level upon thermal annealing at ~600 oC. The result indicates that while there is an apparent band gap for GO prior to a thermal reduction, the gap closes after an annealing around that temperature. This trend of band gap closure was correlated with electrical, chemical, and structural properties to determine a set of GO material properties that is optimal for optoelectronics. The results revealed that annealing at a temperature of ~500 oC leads to the desired properties, demonstrated by a uniform and an order of magnitude enhanced photocurrent map of an individual GO sheet compared to as-synthesized counterpart., Comment: 9 pages, 4 figures in physica status solidi (a) 2016

Perovskites are promising next-generation absorber materials for low-cost and high-efficiency solar cells. Although perovskite cells are configured similar to the classical solar cells, their operation is unique and requires development of a new physical model for characterization, optimization of the cells, and prediction of the panel performance. In this paper, we develop such a physics-based analytical model to describe the operation of different types of perovskite solar cells, explicitly accounting non-uniform generation, carrier selective transport layers, and voltage-dependent carrier collection. The model would allow experimentalists to characterize key parameters of existing cells, understand performance bottlenecks, and predict performance of perovskite-based solar panel - the obvious next step to the evolution of perovskite solar cell technology., Comment: in IEEE Journal of Photovoltaics, 2005

The ability to synthesize high-quality samples over large areas and at low cost is one of the biggest challenges during the developmental stage of any novel material. While chemical vapor deposition (CVD) methods provide a promising low-cost route for CMOS compatible, large-scale growth of materials, it often falls short of the high-quality demands in nanoelectronics and optoelectronics. We present large-scale CVD synthesis of single- and few- layered MoS2 using direct vapor-phase sulfurization of MoO2, which enables us to obtain extremely high-quality single-crystal monolayer MoS2 samples with field-effect mobility exceeding 30 cm2/Vs in monolayers. These samples can be readily synthesized on a variety of substrates, and demonstrate a high-degree of optoelectronic uniformity in Raman and photoluminescence mapping over entire crystals with areas exceeding hundreds of square micrometers. Owing to their high crystalline quality, Raman spectroscopy on these samples reveal a range of multi-phonon processes through peaks with equal or better clarity compared to past reports on mechanically exfoliated samples. This enables us to investigate the layer thickness- and substrate-dependence of the extremely weak phonon processes at 285 cm-1 and 487 cm-1 in 2D MoS2. The ultra-high, optoelectronic-grade crystalline quality of these samples could be further established through photocurrent spectroscopy, which clearly reveal excitonic states at room temperature, a feat that has been previously demonstrated only on device fabricated with mechanically exfoliated that were artificially suspended across trenches. Our method reflects a big step in the development of atomically thin, 2D MoS2 for scalable, high-quality optoelectronics., Comment: Published in ACS Nano

A fundamental understanding of the intrinsic optoelectronic properties of atomically thin transition metal dichalcogenides (TMDs) is crucial for its integration into high performance semiconductor devices. Here, we investigate the transport properties of chemical vapor deposition (CVD) grown monolayer molybdenum disulfide (MoS2) under photo-excitation using correlated scanning photocurrent microscopy and photoluminescence imaging. We examined the effect of local phase transformation underneath the metal electrodes on the generation of photocurrent across the channel length with diffraction-limited spatial resolution. While maximum photocurrent generation occurs at the Schottky contacts of semiconducting (2H-phase) MoS2, after the metallic phase transformation (1T-phase), the photocurrent peak is observed towards the center of the device channel, suggesting a strong reduction of native Schottky barriers. Analysis using the bias and position dependence of the photocurrent indicates that the Schottky barrier heights are few meV for 1T- and ~200 meV for 2H-contacted devices. We also demonstrate that a reduction of native Schottky barriers in a 1T device enhances the photo responsivity by more than one order of magnitude, a crucial parameter in achieving high performance optoelectronic devices. The obtained results pave a pathway for the fundamental understanding of intrinsic optoelectronic properties of atomically thin TMDs where Ohmic contacts are necessary for achieving high efficiency devices with low power consumption., Comment: 20 pages, 6 figures, 8 pages of supporting information, accepted to ACS Nano

The effect of a magnetic field on the electroluminescence of organic light emitting devices originates from the hyperfine interaction between the electron/hole polarons and the hydrogen nuclei of the host molecules. In this paper, we present an analytical theory of magneto-electroluminescence for organic semiconductors. To be specific, we focus on bilayer heterostructure devices. In the case we are considering, light generation at the interface of the donor and acceptor layers results from the formation and recombination of exciplexes. The spin physics is described by a stochastic Liouville equation for the electron/hole spin density matrix. By finding the steady-state analytical solution using Bloch-Wangsness-Redfield theory, we explore how the singlet/triplet exciplex ratio is affected by the hyperfine interaction strength and by the external magnetic field. To validate the theory, spectrally-resolved electroluminescence experiments on BPhen/m-MTDATA devices are analyzed. With increasing emission wavelength, the width of the magnetic field modulation curve of the electroluminescence increases while its depth decreases. These observations are consistent with the model. Finally, the analytical theory is extended to account for an additional low-field structure due to the exchange interaction in the weakly bound polaron-pair states.

Encapsulation of electronic devices based on organic materials that are prone to degradation even under normal atmospheric conditions with hermetic barriers is crucial for increasing their lifetime. A challenge is to develop 'ultrabarriers' that are impermeable, flexible, and preferably transparent. Another important requirement is that they must be compatible with organic electronics fabrication schemes (i.e. must be solution processable, deposited at room temperature and be chemically inert). Here, we report lifetime increase of 1,300 hours for poly(3-hexylthiophene) (P3HT) films encapsulated by uniform and continuous thin (~10 nm) films of reduced graphene oxide (rGO). This level of protection against oxygen and water vapor diffusion is substantially better than conventional polymeric barriers such as CytopTM, which degrades after only 350 hours despite being 400 nm thick. Analysis using atomic force microscopy, x-ray photoelectron spectroscopy and high resolution transmission electron microscopy suggest that the superior oxygen gas/moisture barrier property of rGO is due to the close interlayer distance packing and absence of pinholes within the impermeable sheets. These material properties can be correlated to the enhanced lag time of 500 hours. Our results provide new insight for the design of high performance and solution processable transparent 'ultrabarriers' for a wide range of encapsulation applications., Comment: Advanced Energy Materials (2013)

We observe a strong peak in the capacitive photocurrent of a MDMO-PPV / PCBM bulk heterojunction solar cell for excitation below the absorbance threshold energy. Illumination at the peak energy blocks charge capture at other wavelengths, and causes the photovoltage to drop dramatically. These results suggest that the new peak is due to a charge transfer state, which provides a pathway for charge separation and photocurrent generation in the solar cell., Comment: submitted to Physical Review Letters