Search

We demonstrate the reversible in situ photoreduction of molecular junctions of phosphomolybdate [PMo12O40]3- monolayer self-assembled on flat gold electrodes, connected by the tip of a conductive atomic force microscope. The conductance of the one electron reduced [PMo12O40]4- molecular junction is increased by ca. 10, this open-shell state is stable in the junction in air at room temperature. The analysis of a large current-voltage dataset by unsupervised machine learning and clustering algorithms reveals that the electron transport in the pristine phosphomolybdate junctions leads to symmetric current-voltage curves, controlled by the lowest unoccupied molecular orbital (LUMO) at 0.6 - 0.7 eV above the Fermi energy with ca. 25% of the junctions having a better electronic coupling to the electrodes than the main part of the dataset. This analysis also shows that a small fraction (ca. 18% of the dataset) of the molecules is already reduced. The UV light in situ photoreduced phosphomolybdate junctions are systematically featuring slightly asymmetric current - voltage behaviors, which is ascribed to electron transport mediated by the single occupied molecular orbital (SOMO) nearly at resonance with the Fermi energy of the electrode and by a closely located single unoccupied molecular orbital (SUMO) at ca. 0.3 eV above the SOMO with a weak electronic coupling to the electrodes (ca. 50% of the dataset) or at ca. 0.4 eV but with a better electrode coupling (ca. 50% of the dataset). These results shed lights to the electronic properties of reversible switchable redox polyoxometalates, a key point for potential applications in nanoelectronic devices.

Cross-plane electrical and thermal transport in thin films of a conducting polymer (poly(3,4-ethylenedioxythiophene), PEDOT) stabilized with trifluoromethanesulfonate (OTf) is investigated in this study. We explore their electrical properties by conductive atomic force microscopy (C-AFM), which reveals the presence of highly conductive nano-domains. Thermal conductivity in cross-plane direction is measured with Null-Point scanning thermal microscopy (NP-SThM): PEDOT:OTf indeed demonstrates non-negligible electronic contribution to the thermal transport. We further investigate the correlation between electrical and thermal conductivity by applying posttreatment: chemical reduction (de-doping) for the purpose of lowering charge carrier concentration and hence, electrical conductivity and acid treatment (over-doping) to increase the latter. From our measurements, we find a vibrational thermal conductivity of 0.34 (+/- 0.04) Wm-1 K-1. From the linear dependence or the electronic contribution of thermal conductivity vs. the electronic conductivity (Widemann-Franz law), we infer a Lorenz number 6 times larger than the classical Sommerfeld value as also observed in many organic materials for in-plane thermal transport. Applying the recently proposed molecular Widemann-Franz law, we deduced a reorganization energy of 0.53 (+/- 0.06) eV.

This study explores the potentialities of Scanning Thermal Microscopy (SThM) technique as a tool for measuring thermal transporting properties of carbon-derived materials issued from thermal conversion of organic polymers, such as the most commonly known polyimide (PI), Kapton. For quantitative measurements, the Null Point SThM (NP-SThM) technique is used in order to avoid unwanted effects as the parasitic heat flows through the air and the probe cantilever. Kapton HN films were pyrolysed in an inert atmosphere at temperatures up to 1200{\deg}C to produce carbon-based residues with varying degree of conversion to free sp2 disordered carbon. The thermal conductivity of carbon materials ranges from 0.2 to 2 Wm-1K-1 depending on the temperature of the carbonization process (varied between 500{\deg}C and 1200{\deg}C). In order to validate the applicability of NP-SThM approach to these materials, the results were compared to those obtained with the three more traditional techniques, namely photo-thermal radiometry, flash laser analysis and micro-Raman thermometry. It was found that NP SThM data are in excellent agreement with previous work using more traditional techniques. We used the NP-SThM technique to differentiate structural heterogeneities or imperfections at the surface of the pyrolysed Kapton on the basis of measured local thermal conductivity.

Immobilization of polyoxometalates (POMs) onto oxides is relevant to many applications in the fields of catalysis, energy conversion/storage or molecular electronics. Optimization and understanding the molecule/oxide interface is crucial to rationally improve the performance of the final molecular materials. We herein describe the synthesis and covalent grafting of POM hybrids with remote carboxylic acid functions onto flat Si/SiO2 substrates. Special attention has been paid to the characterization of the molecular layer and to the description of the POM anchoring mode at the oxide interface through the use of various characterization techniques, including ellipsometry, AFM, XPS and FTIR. Finally, electron transport properties were probed in a vertical junction configuration and energy level diagrams have been drawn and discussed in relation with the POM molecular electronic features inferred from cyclic-voltammetry, UV-visible absorption spectra and theoretical calculations. The electronic properties of these POM-based molecular junctions are driven by the POM LUMO (d-orbitals) whatever the nature of the tether or the anchoring group., Comment: Manuscript and supporting information

We report a detailed comparison on the role of a self-assembled monolayer (SAM) of dipolar molecules on the threshold voltage and charge carrier mobility of organic field-effect transistor (OFET) made of both amorphous and polycrystalline organic semiconductors. We show that the same relationship between the threshold voltage and the dipole-induced charges in the SAM holds when both types of devices are fabricated on strictly identical base substrates. Charge carrier mobilities, almost constant for amorphous OFET, are not affected by the dipole in the SAMs, while for polycrystalline OFET (pentacene) the large variation of charge carrier mobilities is related to change in the organic film structure (mostly grain size)., Comment: Full paper and supporting information

We assess the performances of the transition voltage spectroscopy (TVS) method to determine the energies of the molecular orbitals involved in the electronic transport though molecular junctions. A large number of various molecular junctions made with alkyl chains but with different chemical structure of the electrode-molecule interfaces are studied. In the case of molecular junctions with clean, unoxidized electrode-molecule interfaces, i.e. alkylthiols and alkenes directly grafted on Au and hydrogenated Si, respectively, we measure transition voltages in the range 0.9 - 1.4 V. We conclude that the TVS method allows estimating the onset of the tail of the LUMO density of states, at energy located 1.0 - 1.2 eV above the electrode Fermi energy. For oxidized interfaces (e.g. the same monolayer measured with Hg or eGaIn drops, or monolayers formed on a slightly oxidized silicon substrate), lower transition voltages (0.1 - 0.6 V) are systematically measured. These values are explained by the presence of oxide-related density of states at energies lower than the HOMO-LUMO of the molecules. As such, the TVS method is a useful technique to assess the quality of the molecule-electrode interfaces in molecular junctions., Comment: Accepted for publication in J. Phys. Chem C. One pdf file including manuscript, figures and supporting information

We report the synthesis and the electrical properties of fullerene-based molecular junctions on silicon substrate in which the highly \pi-conjugated molecule C60 (\pi quantum well) is isolated from the electrodes by alkyl chains (\sigma tunnel barriers). Initially, the Si/SiO2/\sigmaC60 architecture was prepared either by sequential synthesis (3 different routes) or by direct grafting of the presynthesized C60-\sigma-Si(OEt)3 molecule. We described the chemical synthesis of these routes and the physico-chemical properties of the molecular monolayers. Then, the second \sigma tunnel barrier was added on the Si/SiO2/\sigma C60 junction by applying a hanging mercury drop electrode thiolated with an alkanethiol monolayer. We compared the electronic transport properties of the Si/SiO2/\sigma C60//Hg and Si/SiO2/\sigma C60//\sigmaHg molecular junctions, and we demonstrated by transition voltage spectroscopy that the fullerene LUMO - metal Fermi energy offset can be tailored from ~ 0.2 eV to ~ 1 eV by changing the length of the alkyl chain between the C60 core and the Hg metal electrode (i. e. from direct C60//Hg contact to 14 carbon atoms tunnel barrier)., Comment: Single pdf file including: main text, figures, tables and supporting information.

We report low frequency tunnel current noise characteristics of an organic monolayer tunnel junction. The measured devices, n-Si/alkyl chain (C18H37)/Al junctions, exhibit a clear 1/ f γ power spectrum noise with 1< γ <1.2. We observe a slight bias-dependent background of the normalized current noise power spectrum (SI/I^2). However, a local increase is also observed over a certain bias range, mainly if V > 0.4 V, with an amplitude varying from device to device. We attribute this effect to an energy-dependent trap-induced tunnel current. We find that the background noise, SI, scales with >. A model is proposed showing qualitative agreements with our experimental data., Comment: Phys. Rev. B, in press

We report the synthesis and characterization of molecular rectifying diodes on silicon using sequential grafting of self-assembled monolayers of alkyl chains bearing a pi group at their outer end (Si/sigma-pi/metal junctions). We investigate the structure-performance relationships of these molecular devices and we examine to what extent the nature of the pi end-group (change in the energy position of their molecular orbitals) drives the properties of these molecular diodes. For all the pi-groups investigated here, we observe rectification behavior. These results extend our preliminary work using phenyl and thiophene groups (S. Lenfant et al., Nano Letters 3, 741 (2003)).The experimental current-voltage curves are analyzed with a simple analytical model, from which we extract the energy position of the molecular orbital of the pi-group in resonance with the Fermi energy of the electrodes. We report the experimental studies of the band lineup in these silicon/alkyl-pi conjugated molecule/metal junctions. We conclude that Fermi level pinning at the pi-group/metal interface is mainly responsible for the observed absence of dependence of the rectification effect on the nature of the pi-groups, even though they were chosen to have significant variations in their electronic molecular orbitals, Comment: To be published in J. Phys. Chem. B

The current density-voltage (J-V) characteristics of self assembled monolayers of 3-mercaptopropyltrimethoxysilane (MPTMS) chemisorbed on the native oxide surface of p+-doped Si demonstrate the excellent tunnel dielectric behavior of organic monolayers down to 3 carbon atoms. The J-V characteristics of MPTMS SAMs on Si are found to be asymmetric, and the direction of rectification has been found to depend upon the applied voltage range. At voltages < 2.45V, the reverse bias current was found to be higher than forward bias current; while at higher voltages this trend was reversed. This result is in agreement with Simmons theory. The tunnel barrier heights for this short chain (2.56 and 2.14 eV respectively at Au and Si interfaces) are in good agreement with the ones for longer chains (>10 carbon atoms) if the chain is chemisorbed at the electrodes. These results extend all previous experiments on such molecular tunnel dielectrics down to 3 carbon atoms. This suggests that these molecular monolayers, having good tunnel behavior (up to 2.5 eV) over a large bias range, can be used as gate dielectric well below the limits of Si-based dielectrics., Comment: Small, in press

We demonstrate a molecular rectifying junction made from a sequential self-assembly on silicon. The device structure consists of only one conjugated (p) group and an alkyl spacer chain. We obtain rectification ratios up to 37 and threshold voltages for rectification between -0.3V and -0.9V. We show that rectification occurs from resonance through the highest occupied molecular orbital of the p-group in good agreement with our calculations and internal photoemission spectroscopy. This approach allows us to fabricate molecular rectifying diodes compatible with silicon nanotechnologies for future hybrid circuitries.