Search

For over three decades, scanning probe microscopy (SPM) has been a key method for exploring material structures and functionalities at nanometer and often atomic scales in ambient, liquid, and vacuum environments. Historically, SPM applications have predominantly been downstream, with images and spectra serving as a qualitative source of data on the microstructure and properties of materials, and in rare cases of fundamental physical knowledge. However, the fast growing developments in accelerated material synthesis via self-driving labs and established applications such as combinatorial spread libraries are poised to change this paradigm. Rapid synthesis demands matching capabilities to probe structure and functionalities of materials on small scales and with high throughput, which are characteristically inherent to SPM. Here, we overview SPM methods applicable to these emerging applications and emphasize their quantitativeness, focusing on piezoresponse force microscopy, electrochemical strain microscopy, conductive, and surface photovoltage measurements. We discuss the challenges and opportunities ahead, asserting that SPM will play a crucial role in closing the loop from material prediction and synthesis to characterization., Comment: 64 pages, 15 figures

Since the dawn of scanning probe microscopy (SPM), tapping or intermittent contact mode has been one of the most widely used imaging modes. Manual optimization of tapping mode not only takes a lot of instrument and operator time, but also often leads to frequent probe and sample damage, poor image quality and reproducibility issues for new types of samples or inexperienced users. Despite wide use, optimization of tapping mode imaging is an extremely hard problem, ill-suited to either classical control methods or machine learning. Here we introduce a reward-driven workflow to automate the optimization of SPM in the tapping mode. The reward function is defined based on multiple channels with physical and empirical knowledge of good scans encoded, representing a sample-agnostic measure of image quality and imitating the decision-making logic employed by human operators. This automated workflow gives optimal scanning parameters for different probes and samples and gives high-quality SPM images consistently in the attractive mode. This study broadens the application and accessibility of SPM and opens the door for fully automated SPM., Comment: 20 pages, 6 figures

The rapid development of computation power and machine learning algorithms has paved the way for automating scientific discovery with a scanning probe microscope (SPM). The key elements towards operationalization of automated SPM are the interface to enable SPM control from Python codes, availability of high computing power, and development of workflows for scientific discovery. Here we build a Python interface library that enables controlling an SPM from either a local computer or a remote high-performance computer (HPC), which satisfies the high computation power need of machine learning algorithms in autonomous workflows. We further introduce a general platform to abstract the operations of SPM in scientific discovery into fixed-policy or reward-driven workflows. Our work provides a full infrastructure to build automated SPM workflows for both routine operations and autonomous scientific discovery with machine learning., Comment: 16 pages, 7 figures

Focused electron beam induced deposition (FEBID) is a direct write technique for depositing materials on a support substrate akin to 3D printing with an electron beam (e-beam). Opportunities exist for merging this existing technique with aberration-corrected scanning transmission electron microscopy to achieve molecular- or atomic-level spatial precision. Several demonstrations have been performed using graphene as the support substrate. A common challenge that arises during this process is e-beam-induced hydrocarbon deposition, suggesting greater control over the sample environment is needed. Various strategies exist for cleaning graphene in situ. One of the most effective methods is to rapidly heat to high temperatures, e.g., 600 C or higher. While this can produce large areas of what appears to be atomically clean graphene, mobile hydrocarbons can still be present on the surfaces. Here, we show that these hydrocarbons are primarily limited to surface migration and demonstrate an effective method for interrupting the flow using e-beam deposition to form corralled hydrocarbon regions. This strategy is effective for maintaining atomically clean graphene at high temperatures where hydrocarbon mobility can lead to substantial accumulation of unwanted e-beam deposition.

Atomic-scale fabrication is an outstanding challenge and overarching goal for the nanoscience community. The practical implementation of moving and fixing atoms to a structure is non-trivial considering that one must spatially address the positioning of single atoms, provide a stabilizing scaffold to hold structures in place, and understand the details of their chemical bonding. Free-standing graphene offers a simplified platform for the development of atomic-scale fabrication and the focused electron beam in a scanning transmission electron microscope can be used to locally induce defects and sculpt the graphene. In this scenario, the graphene forms the stabilizing scaffold and the experimental question is whether a range of dopant atoms can be attached and incorporated into the lattice using a single technique and, from a theoretical perspective, we would like to know which dopants will create technologically interesting properties. Here, we demonstrate that the electron beam can be used to selectively and precisely insert a variety of transition metal atoms into graphene with highly localized control over the doping locations. We use first-principles density functional theory calculations with direct observation of the created structures to reveal the energetics of incorporating metal atoms into graphene and their magnetic, electronic, and quantum topological properties.

High traffic touch surfaces such as doorknobs, countertops, and handrails can be transmission points for the spread of pathogens, emphasizing the need to develop materials that actively self-sanitize. Metals are frequently used for these surfaces due to their durability, but many metals also possess antimicrobial properties which function through a variety of mechanisms. This work investigates metallic alloys comprised of several bioactive metals with the target of achieving broad-spectrum, rapid bioactivity through synergistic activity. An entropy-motivated stabilization paradigm is proposed to prepare scalable alloys of copper, silver, nickel and cobalt. Using combinatorial sputtering, thin-film alloys were prepared on 100 mm wafers with 50% compositional grading of each element across the wafer. The films were then annealed and investigated for alloy stability. Bioactivity testing was performed on both the as-grown alloys and the annealed films using four microorganisms -- Phi6, MS2, Bacillus subtilis and Escherichia coli -- as surrogates for human viral and bacterial pathogens. Testing showed that after 30 s of contact with some of the test alloys, Phi6, an enveloped, single-stranded RNA bacteriophage that serves as a SARS-CoV 2 surrogate, was reduced up to 6.9 orders of magnitude (>99.9999%). Additionally, the non-enveloped, double-stranded DNA bacteriophage MS2, and the Gram-negative E. coli and Gram-positive B. subtilis bacterial strains showed a 5.0, 6.4, and 5.7 log reduction in activity after 30, 20 and 10 minutes, respectively. Bioactivity in the alloy samples showed a strong dependence on the composition, with the log reduction scaling directly with the Cu content. Concentration of Cu by phase separation after annealing improved activity in some of the samples. The results motivate a variety of themes which can be leveraged to design ideal bioactive surfaces., Comment: 15 pages, 6 figures

Electron-beam (e-beam) manipulation of single dopant atoms in an aberration-corrected scanning transmission electron microscope is emerging as a method for directed atomic motion and atom-by-atom assembly. Until now, the dopant species have been limited to atoms closely matched to carbon in terms of ionic radius and capable of strong covalent bonding with carbon atoms in the graphene lattice. In situ dopant insertion into a graphene lattice has thus far been demonstrated only for Si, which is ubiquitously present as a contaminant in this material. Here, we achieve in situ manipulation of Pt atoms and their insertion into the graphene host matrix using the e-beam deposited Pt on graphene as a host system. We further demonstrate a mechanism for stabilization of the Pt atom, enabled through the formation of Si-stabilized Pt heteroatomic clusters attached to the graphene surface. This study provides evidence toward the universality of the e-beam assembly approach, opening a pathway for exploring cluster chemistry through direct assembly., Comment: 23 pages, 6 figures

Compositionally complex materials (CCMs) present a potential paradigm shift in the design of magnetic materials. These alloys exhibit long-range structural order coupled with limited or no chemical order. As a result, extreme local environments exist with a large opposing magnetic energy term, which can manifest large changes in the magnetic behavior. In the current work, the magnetic properties of (Cr, Mn, Fe, Ni) alloys are presented. These materials were prepared by room-temperature combinatorial sputtering, resulting in a range of compositions with a single BCC structural phase and no chemical ordering. The combinatorial growth technique allows CCMs to be prepared outside of their thermodynamically stable phase, enabling the exploration of otherwise inaccessible order. The mixed ferromagnetic and antiferromagnetic interactions in these alloys causes frustrated magnetic behavior, which results in an extremely low coercivity (<1 mT), which increases rapidly at 50 K. At low temperatures, the coercivity achieves values of nearly 500 mT, which is comparable to some high-anisotropy magnetic materials. Commensurate with the divergent coercivity is an atypical drop in the temperature dependent magnetization. These effects are explained by a mixed magnetic phase model, consisting of ferro-, antiferro , and frustrated magnetic regions, and are rationalized by simulations. A machine-learning algorithm is employed to visualize the parameter space and inform the development of subsequent compositions. Annealing the samples at 600 {\deg}C orders the sample, more-than doubling the Curie temperature and increasing the saturation magnetization by as much as 5x. Simultaneously, the large coercivities are suppressed, resulting in magnetic behavior that is largely temperature independent over a range of 350 K., Comment: 13 pages, 6 figures

Atomically thin circuits have recently been explored for applications in next-generation electronics and optoelectronics and have been demonstrated with two-dimensional lateral heterojunctions. In order to form true 2D circuitry from a single material, electronic properties must be spatially tunable. Here, we report tunable transport behavior which was introduced into single layer tungsten diselenide and tungsten disulfide by focused He$^+$ irradiation. Pseudo-metallic behavior was induced by irradiating the materials with a dose of ~1x10$^{16} He^+/cm^2$ to introduce defect states, and subsequent temperature-dependent transport measurements suggest a nearest neighbor hopping mechanism is operative. Scanning transmission electron microscopy and electron energy loss spectroscopy reveal that Se is sputtered preferentially, and extended percolating networks of edge states form within WSe$_2$ at a critical dose of 1x10$^{16} He^+/cm^2$. First-principles calculations confirm the semiconductor-to-metallic transition of WSe$_2$ after pore and edge defects were introduced by He$^+$ irradiation. The hopping conduction was utilized to direct-write resistor loaded logic circuits in WSe$_2$ and WS$_2$ with a voltage gain of greater than 5. Edge contacted thin film transistors were also fabricated with a high on/off ratio (> 10$^6$), demonstrating potential for the formation of atomically thin circuits., Comment: 6 figures

We report on the use of helium ion implantation to independently control the out-of-plane lattice constant in epitaxial La0.7Sr0.3MnO3 thin films without changing the in-plane lattice constants. The process is reversible by a vacuum anneal. Resistance and magnetization measurements show that even a small increase in the out-of-plane lattice constant of less than 1% can shift the metal-insulator transition and Curie temperatures by more than 100 {\deg}C. Unlike conventional epitaxy-based strain tuning methods which are constrained not only by the Poisson effect but by the limited set of available substrates, the present study shows that strain can be independently and continuously controlled along a single axis. This permits novel control over orbital populations through Jahn-Teller effects, as shown by Monte Carlo simulations on a double-exchange model. The ability to reversibly control a single lattice parameter substantially broadens the phase space for experimental exploration of predictive models and leads to new possibilities for control over materials' functional properties.