Search

Tuneable electronic properties in transition metal dichalcogenides (TMDs) are essential to further their use in device applications. Here, we present a comprehensive scanning tunnelling microscopy and spectroscopy study of a doping-induced charge density wave (CDW) in semiconducting bulk 1T-ZrSe$_2$. We find that atomic impurities which locally shift the Fermi level ($E_F$) into the conduction band trigger a CDW reconstruction concomitantly to the opening of a gap at $E_F$. Our findings shed new light on earlier photoemission spectroscopy and theoretical studies of bulk 1T-ZrSe$_2$, and provide a local understanding of the electron-doping mediated CDW transition observed in semiconducting TMDs., Comment: 16 pages, 4 figures

Scanning Tunneling Spectroscopy (STS) is a unique technique to probe the local density of states (LDOS) at the atomic scale by measuring the tunneling conductance between a sharp tip and a sample surface. However, the technique suffers of well-known limitations, the so-called set-point effect, which can potentially introduce artifacts in the measurements. We compare several STS imaging schemes applied to the LDOS modulations of the charge density wave state on atomically flat surfaces, and demonstrate that only constant-height STS is capable of mapping the intrinsic LDOS. In the constant-current STS, commonly used and easier-to-implement, the tip-sample distance variations imposed by the feedback loop result in set-point-dependent STS images and possibly mislead the identification of the CDW gap edges., Comment: 7 pages, 6 figures

Geometric phase analysis (GPA) is a widely used technique for extracting displacement and strain fields from scanning probe images. Here, we demonstrate that GPA should be implemented with caution when several fundamental lattices contribute to the image, in particular in twisted heterostructures featuring moir\'e patterns. We find that in this case, GPA is likely to suggest the presence of chiral displacement and periodic strain fields, even if the structure is completely relaxed and without distortions. These delusive fields are subject to change with varying twist angles, which could mislead the interpretation of twist angle dependent properties.

Inducing and controlling spin-orbit coupling (SOC) in graphene is key to create topological states of matter, and for the realization of spintronic devices. Placing graphene onto a transition metal dichalcogenide is currently the most successful strategy to achieve this goal, but there is no consensus as to the nature and the magnitude of the induced SOC. Here, we show that the presence of backscattering in graphene-on-WSe$_2$ heterostructures can be used to probe SOC and to determine its strength quantitatively, by imaging quasiparticle interference with a scanning tunneling microscope. A detailed theoretical analysis of the Fourier transform of quasiparticle interference images reveals that the induced SOC consists of a valley-Zeeman ($\lambda_{\text{vZ}}\approx 2$ meV) and a Rashba ($\lambda_\text{R}\approx 15$ meV) term, one order of magnitude larger than what theory predicts, but in excellent agreement with earlier transport experiments. The validity of our analysis is confirmed by measurements on a 30 degree twist angle heterostructure that exhibits no backscattering, as expected from symmetry considerations. Our results demonstrate a viable strategy to determine SOC quantitatively by imaging quasiparticle interference.

Strain is attracting much interest as a mean to tune the properties of thin exfoliated two-dimensional materials and their heterostructures. Numerous devices to apply tunable uniaxial strain are proposed in the literature, but only few for biaxial strain where there is often a trade-off between maximum strain and uniformity, reversibility and device size. We present a compact device that allows the controlled application of uniform in-plane biaxial strain, with maximum deformation and uniformity comparable to those found in much larger devices. Its performance and strain uniformity over the sample area are modeled using finite element analysis and demonstrated by measuring the response of exfoliated 2H-MoS$_2$ to strain by Raman spectroscopy., Comment: 10 pages, 4 figures

Charge density waves (CDWs) are understood in great details in one dimension, but they remain largely enigmatic in two dimensional systems. In particular, numerous aspects of the associated energy gap and the formation mechanism are not fully understood. Two long standing riddles are the amplitude and position of the CDW gap with respect to the Fermi level ($E_F$) and the frequent absence of CDW contrast inversion (CI) between opposite bias scanning tunneling microscopy (STM) images. Here, we find compelling evidence that these two issues are intimately related. Combining density functional theory and STM to analyse the CDW pattern and modulation amplitude in 1$T$-TiSe$_2$, we find that CI takes place at an unexpected negative sample bias because the CDW gap opens away from $E_F$, deep inside the valence band. This bias becomes increasingly negative as the CDW gap shifts to higher binding energy with electron doping. This study shows the importance of CI in STM images to identify periodic modulations with a CDW and to gain valuable insight into the CDW gap, whose measurement is notoriously controversial., Comment: Main text 8 pages, 4 figures + Supplemental Material 7 pages, 6 figures

Many atomically thin exfoliated 2D materials degrade when exposed to ambient conditions. They can be protected and investigated by means of transport and optical measurements if they are encapsulated between chemically inert single layers in the controlled atmosphere of a glove box. Here, we demonstrate that the same encapsulation procedure is also compatible with scanning tunneling microscopy (STM) and spectroscopy (STS). To this end, we report a systematic STM/STS investigation of a model system consisting of an exfoliated 2H-NbSe2 crystal capped with a protective 2H-MoS2 monolayer. We observe different electronic coupling between MoS2 and NbSe2, from a strong coupling when their lattices are aligned within a few degrees to 2 essentially no coupling for 30{\deg} misaligned layers. We show that STM always probes intrinsic NbSe2 properties such as the superconducting gap and charge density wave at low temperature when setting the tunneling bias inside the MoS2 band gap, irrespective of the relative angle between the NbSe2 and MoS2 lattices. This study demonstrates that encapsulation is fully compatible with STM/STS investigations of 2D materials., Comment: 19 pages, 5 figures

The surface diffusion potential landscape plays an essential role in a number of physical and chemical processes such as self-assembly and catalysis. Diffusion energy barriers can be calculated theoretically for simple systems, but there is currently no experimental technique to systematically measure them on the relevant atomic length scale. Here, we introduce an atomic force microscopy based method to semiquantitatively map the surface diffusion potential on an atomic length scale. In this proof of concept experiment, we show that the atomic force microscope damping signal at constant frequency-shift can be linked to nonconservative processes associated with the lowering of energy barriers and compared with calculated single-atom diffusion energy barriers., Comment: 8 pages and 3 figures

We report a detailed study of the microscopic effects of Cu intercalation on the charge density wave (CDW) in 1\textit{T}-Cu$_x$TiSe$_2$. Scanning tunneling microscopy and spectroscopy (STM/STS) reveal a unique, Cu driven spatial texturing of the charge ordered phase, with the appearance of energy dependent CDW patches and sharp $\pi$-phase shift domain walls ($\pi$DWs). The energy and doping dependencies of the patchwork are directly linked to the inhomogeneous potential landscape due to the Cu intercalants. They imply a CDW gap with unusual features, including a large amplitude, the opening below the Fermi level and a shift to higher binding energy with electron doping. Unlike the patchwork, the $\pi$DWs occur independently of the intercalated Cu distribution. They remain atomically sharp throughout the investigated phase diagram and occur both in superconducting and non-superconducting specimen. These results provide unique atomic-scale insight on the CDW ground state, questioning the existence of incommensurate CDW domain walls and contributing to understand its formation mechanism and interplay with superconductivity.

The capability to isolate one to few unit-cell thin layers from the bulk matrix of layered compounds opens fascinating prospects to engineer novel electronic phases. However, a comprehensive study of the thickness dependence and of potential extrinsic effects are paramount to harness the electronic properties of such atomic foils. One striking example is the charge density wave (CDW) transition temperature in layered dichalcogenides whose thickness dependence remains unclear in the ultrathin limit. Here we present a detailed study of the thickness and temperature dependences of the CDW in VSe$_2$ by scanning tunnelling microscopy (STM). We show that mapping the real-space CDW periodicity over a broad thickness range unique to STM provides essential insight. We introduce a robust derivation of the local order parameter and transition temperature based on the real space charge modulation amplitude. Both quantities exhibit a striking non-monotonic thickness dependence that we explain in terms of a 3D to 2D dimensional crossover in the FS topology. This finding highlights thickness as a true tuning parameter of the electronic ground state and reconciles seemingly contradicting thickness dependencies determined in independent transport studies.

Semiconducting transition metal dichalcogenides (TMDs) have emerged as materials that can be used to realize two-dimensional (2D) crystals possessing rather unique transport and optical properties. Most research has so far focused on sulfur and selenium compounds, while tellurium-based materials attracted little attention so far. As a first step in the investigation of Te-based semiconducting TMDs in this context, we have studied MoTe$_2$ crystals with thicknesses above 4 nm, focusing on surface transport and a quantitative determination of the gap structure. Using ionic-liquid gated transistors, we show that ambipolar transport at the surface of the material is reproducibly achieved, with hole and electron mobility values between 10 and 30 cm$^2$/Vs at room temperature. The gap structure is determined through three different techniques: ionic-liquid gated transistors and scanning tunneling spectroscopy, that allow the measurement of the indirect gap ($E_{ind}$), and optical transmission spectroscopy on crystals of different thickness, that enables the determination of both the direct ($E_{dir}$) and the indirect gap. We find that at room temperature $E_{ind}$ = 0.88 eV and $E_{dir}$ = 1.02 eV. Our results suggest that thin MoTe$_2$ layers may exhibit a transition to a direct gap before mono-layer thickness. They should also drastically extend the range of direct gaps accessible in 2D semiconducting TMDs., Comment: 14 pages, 4 figures. To appear in 2D Materials

Manganites are technologically important materials, used widely as solid oxide fuel cell cathodes: they have also been shown to exhibit electroresistance. Oxygen bulk diffusion and surface exchange processes are critical for catalytic action, and numerous studies of manganites have linked electroresistance to electrochemical oxygen migration. Direct imaging of individual oxygen defects is needed to underpin understanding of these important processes. It is not currently possible to collect the required images in the bulk, but scanning tunnelling microscopy could provide such data for surfaces. Here we show the first atomic resolution images of oxygen defects at a manganite surface. Our experiments also reveal defect dynamics, including oxygen adatom migration, vacancy-adatom recombination and adatom bistability. Beyond providing an experimental basis for testing models describing the microscopics of oxygen migration at transition metal oxide interfaces, our work resolves the long-standing puzzle of why scanning tunnelling microscopy is more challenging for layered manganites than for cuprates., Comment: 7 figures