Search

This letter reports a highly scaled 90 nm gate length beta-Ga2O3 T-gate MOSFET with no current collapse and record power gain cut off frequency (fMAX). The epitaxial stack of 60 nm thin channel MOSFET was grown by Molecular Beam Epitaxy (MBE) and highly doped (n++) contact regrowth was carried out by Metal Organic Chemical Vapour Deposition (MOCVD) in the source/drain region. Maximum on current (IDS, MAX) of 160 mA/mm and transconductance (gm) around 36 mS/mm was measured at VDS= 10 V for LSD= 1.5 micrometer channel length. Transconductance is limited by higher channel sheet resistance (Rsheet). We observed no current collapse for both drain and gate lag measurement even at higher VDG,Q quiescent bias points. This is the first report of Ga2O3 FET showing no current collapse without any external passivation. Breakdown voltage around 125 V was reported for LGD= 1.2 micrometer. We extracted 27 GHz current gain cut off frequency (fT) and 55 GHz fMAX for 20 V drain bias. fMAX value mentioned here is the highest for Ga2O3 and the first demonstration of 55 GHz operation. fT. VBR product of 3.375 THz.V has been calculated which is comparable with state-of-art GaN HEMT. This letter suggests that Ga2O3 can be a suitable candidate for X-band application.

The lack of p-type doping has impeded the development of vertical gallium oxide (Ga2O3) devices. Current blocking layers (CBL) using implanted deep acceptors has been used to demonstrate vertical devices. This paper presents the first demonstration of in situ Mg-doped beta-Ga2O3 CBLs grown using metalorganic chemical vapor deposition. Device structures were designed with in-situ Mg doped layers with varied targeted Mg doping concentrations, which were calibrated by quantitative secondary ion mass spectroscopy (SIMS). The effectiveness of the CBL is characterized using temperature dependent current-voltage measurements using n-Mg-doped-n structures, providing crucial insight into the underlying mechanisms. To further validate the experimental results, a TCAD simulation is performed and the electrically active effective doping is found to be dependent on the Mg-doping density, offering a new perspective on the optimization of CBL performance. Breakdown measurements show a 3.4 MV/cm field strength. This study represents a significant step forward in the development of Ga2O3-based devices and paves the way for future advancements in this exciting field.

Phase pure \b{eta}-(AlxGa1-x)2O3 thin films are grown on (001) oriented \b{eta}-Ga2O3 substrates via metalorganic chemical vapor deposition (MOCVD). By systematically tuning the precursor molar flow rates, the epitaxial growth of coherently strained \b{eta}-(AlxGa1-x)2O3 films are demonstrated with up to 25% Al compositions as evaluated by high resolution x-ray diffraction (XRD). The asymmetrical reciprocal space mapping confirms the growth of coherent \b{eta}-(AlxGa1-x)2O3 films (x < 25%) on (001) \b{eta}-Ga2O3 substrates. While the films show smooth surface morphologies, the alloy inhomogeneity with local segregation of Al along (-201) plane is observed from atomic resolution STEM imaging, resulting in wavy and inhomogeneous interfaces in \b{eta}-(AlxGa1-x)2O3/\b{eta}-Ga2O3 superlattice structure. Room temperature Raman spectra of \b{eta}-(AlxGa1-x)2O3 films show similar characteristics peaks as (001) \b{eta}-Ga2O3 substrate without obvious Raman shifts for films with different Al compositions. Atom probe tomography (APT) was used to investigate the atomic level structural chemistry with increasing Al content in the \b{eta}-(AlxGa1-x)2O3 films. A monotonous increase in chemical heterogeneity is observed from the in-plane Al/Ga distributions which was further confirmed via statistical frequency distribution analysis (FDA). Although the films exhibit alloy fluctuations, n-type doping with good electrical properties are demonstrated for films with various Al compositions. The determined valence and conduction band offsets at \b{eta}-(AlxGa1-x)2O3/\b{eta}-Ga2O3 heterojunctions using x-ray photoelectron spectroscopy (XPS) reveal the formation of type-II (staggered) band alignment.

This letter reports high-performance $\mathrm{\beta} Ga2O3 thin channel MOSFETs with T-gate and degenerately doped source/drain contacts regrown by MOCVD. Gate length scaling (LG= 160-200 nm) leads to a peak drain current (ID,MAX) of 285 mA/mm and peak trans-conductance (gm) of 52 mS/mm at 10 V drain bias with 23.5 Ohm mm on resistance (Ron). A low metal/n+ contact resistance of 0.078 Ohm mm was extracted from TLM measurement. Ron is dominated by interface resistance between channel and regrown layer. A gate-to-drain breakdown voltage of 192 V is measured for LGD = 355 nm resulting in average breakdown field (E_AVG) of 5.4 MV/cm. This E_AVG is the highest reported among all sub-micron gate length lateral FETs. RF measurements on 200 nm Silicon Nitride (Si3N4) passivated device shows a current gain cut off frequency (f_T) of 11 GHz and record power gain cut off frequency (f_MAX) of 48 GHz. The f_T.V_Br product is 2.11 THz.V for 192 V breakdown voltage. The switching figure of merit exceeds that of silicon and is comparable to mature wide-band gap devices.

The in-situ metalorganic chemical vapor deposition (MOCVD) growth of Al$_2$O$_3$ dielectrics on $\beta$-Ga$_2$O$_3$ and $\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films is investigated as a function of crystal orientations and Al compositions of $\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The interface and film qualities of Al$_2$O$_3$ dielectrics are evaluated by high resolution X-ray diffraction (HR-XRD) and scanning transmission electron microscopy (HR-STEM) imaging, which indicate the growth of high quality amorphous Al$_2$O$_3$ dielectrics with abrupt interfaces on (010), (100) and (-201) oriented $\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The surface stoichiometries of Al$_2$O$_3$ deposited on all orientations of $\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ are found to be well maintained with a bandgap energy of 6.91 eV as evaluated by high resolution x-ray photoelectron spectroscopy, which is consistent with the atomic layer deposited (ALD) Al$_2$O$_3$ dielectrics. The evolution of band offsets at both in-situ MOCVD and ex-situ ALD deposited Al$_2$O$_3$/$\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ are determined as a function of Al composition, indicating the influence of the deposition method, orientation, and Al composition of $\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films on resulting band alignments. Type II band alignments are determined at the MOCVD grown Al$_2$O$_3$/$\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ interfaces for (010) and (100) orientations, whereas type I band alignments with relatively lower conduction band offsets are observed along (-201) orientation. Results from this work revealed that the in-situ MOCVD deposited high quality Al$_2$O$_3$ dielectrics with sharp interfaces can be considered as a viable alternative of commonly used ex-situ deposited (ALD) Al$_2$O$_3$ for developing high performance $\beta$-Ga$_2$O$_3$ and $\beta$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ based devices.

Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on GaN-, AlN-on sapphire, and YSZ substrates through a systematical tuning of the growth parameters including the precursor molar flow rates, chamber pressure and growth temperature, whereas the growth on c-sapphire substrates leads to a mixture of \b{eta}- and \k{appa}polymorphs of Ga2O3 under the investigated growth conditions. The influence of the crystalline structure, surface morphology and roughness of \k{appa}-Ga2O3 films grown on different substrates are investigated as a function of precursor flow rate. High resolution scanning transmission electron microscopy (HR-STEM) imaging of \k{appa}-Ga2O3 films reveals abrupt interfaces between the epitaxial film and the sapphire, GaN and YSZ substrates. The growth of single crystal orthorhombic \k{appa}Ga2O3 films is confirmed by analyzing the STEM nano-diffraction pattern. The chemical composition, surface stoichiometry, and the bandgap energies of \k{appa}-Ga2O3 thin films grown on different substrates are studied by high resolution x-ray photoelectron spectroscopy (XPS) measurements. The type-II (staggered) band alignments at three interfaces between \k{appa}-Ga2O3 and c-sapphire, AlN, and YSZ substrates are determined by XPS, with the exception of \k{appa}-Ga2O3/GaN interface, which shows type I (straddling) band alignment.

We report on the non-destructive measurement of Young's modulus of thin-film single crystal beta gallium oxide (beta-Ga2O3) out of its nanoscale mechanical structures by measuring their fundamental mode resonance frequencies. From the measurements, we extract Young's modulus in (100) plane, EY,(100) = 261.4+/-20.6 GPa, for beta-Ga2O3 nanoflakes synthesized by low-pressure chemical vapor deposition (LPCVD), and Young's modulus in [010] direction, EY,[010] = 245.8+/-9.2 GPa, for beta-Ga2O3 nanobelts mechanically cleaved from bulk beta-Ga2O3 crystal grown by edge-defined film-fed growth (EFG) method. The Young's moduli extracted directly on nanomechanical resonant device platforms are comparable to theoretical values from first-principle calculations and experimentally extracted values from bulk crystal. This study yields important quantitative nanomechanical properties of beta-Ga2O3 crystals, and helps pave the way for further engineering of beta-Ga2O3 micro/nanoelectromechanical systems (M/NEMS) and transducers., Comment: 11 Pages, 5 Figures, with 3 Pages of Supplementary Material and 1 Supplementary Figure

A complete set of all optical phonon modes predicted by symmetry for bixbyite structure indium oxide is reported here from a combination of far-infrared and infrared spectroscopic ellipsometry, as well as first principle calculations. Dielectric function spectra measured on high quality, marginally electrically conductive melt grown single bulk crystals are obtained on a wavelength-by-wavelength (a.k.a. point-by-point) basis and by numerical reduction of a subtle free charge carrier Drude model contribution. A four-parameter semi-quantum model is applied to determine all sixteen pairs of infrared-active transverse and longitudinal optical phonon modes, including the high-frequency dielectric constant, $\varepsilon_{\infty}=4.05\pm 0.05$. The Lyddane-Sachs-Teller relation then gives access to the static dielectric constant, $\varepsilon_{\mathrm{DC}}=10.55\pm 0.07$. All experimental results are in excellent agreement with our density functional theory calculations and with previously reported values, where existent. We also perform optical Hall effect measurements and determine for the unintentionally doped $n$-type sample a free electron density of $n=(2.81 \pm 0.01)\times 10^{17}$~cm$^{-3}$, mobility of $\mu=(112 \pm 3)$~cm$^{2}$/(Vs), and an effective mass parameter of $(0.208\pm0.006)m_e$. Density and mobility parameters compare very well with results of electrical Hall effect measurements. Our effective mass parameter, which is measured independently of any other experimental technique, represents the bottom curvature of the $\Gamma$ point in In$_2$O$_3$ in agreement with previous extrapolations. We use terahertz spectroscopic ellipsometry to measure the quasi-static response of In$_2$O$_3$, and our model validates the static dielectric constant obtained from the Lyddane-Sachs-Teller relation.

Ammonia (NH3) is commonly used as group V precursor in gallium nitride (GaN) metalorganic chemical vapor deposition (MOCVD). The high background carbon (C) impurity in MOCVD GaN is related to the low pyrolysis efficiency of NH3, which represents one of the fundamental challenges hindering the development of high purity thick GaN for vertical high power device applications. This work uses a laser-assisted MOCVD (LA-MOCVD) growth technique to address the high-C issue in MOCVD GaN. Carbon dioxide (CO2) laser with wavelength of 9.219 um was utilized to facilitate NH3 decomposition via resonant vibrational excitation. The LA-MOCVD GaN growth rate (as high as 10 um/hr) shows a strong linear relationship with the trimethylgallium (TMGa) flow rate, indicating high effective V/III ratios and hence efficient NH3 decomposition. Pits-free surface morphology of LA-MOCVD GaN was demonstrated for films with growth rate as high as 8.5 um/hr. The background [C] in LA-MOCVD GaN films decreases monotonically as the laser power increases. A low [C] at 5.5E15 cm-3 was achieved in LA-MOCVD GaN film grown with the growth rate of 4 um/hr. Charge transport characterization of LA-MOCVD GaN films reveals high crystalline quality with room temperature mobility >1000 cm2/Vs. LA-MOCVD growth technique provides an enabling route to achieve high quality GaN epitaxy with low-C impurity and fast growth rate simultaneously. This technique can also be extended for epitaxy of other nitride-based semiconductors., Comment: 19 pages, 8 figures

In this paper, we have demonstrated the large-size free-standing single-crystal b-Ga2O3 NMs fabricated by the hydrogen implantation and lift-off process directly from MOCVD grown b-Ga2O3 epifilms on native substrates. The optimum implantation conditions were simulated with a Monte-Carlo simulation to obtain the high hydrogen concentration with a narrow ion distribution at the desired depth. Two as grown b-Ga2O3 samples with different orientation ([100] and [001]) were used and successfully create 1.2 um thick b-Ga2O3 NMs without any physical damages. These b-Ga2O3 NMs were then transfer-printed onto rigid and flexible substrates such as SiC substrate and polyimide substrate. Various material characterizations were performed to investigate the crystal quality, surface morphology, optical property, mechanical property, and bandgap before and after the lift-off and revealed that good material quality is maintained. This result offers several benefits in that the thickness, doping, and size of b-Ga2O3 NMs can be fully controlled. Moreover, more advanced b-Ga2O3-based NM structures such as (AlxGa1-x)2O3/Ga2O3 heterostructure NMs can be directly created from their bulk epitaxy substrates thus this result provides a viable route for the realization of high performance b-Ga2O3 NM-based electronics and optoelectronics that can be built on various substrates and platforms.

A predicted type-II staggered band alignment with an approximately $1.4 eV$ valence band offset at the $ZnGeN_2/GaN$ heterointerface has inspired novel band-engineered $III-N/ZnGeN_2$ heterostructure-based device designs for applications in high performance optoelectronics. We report on the determination of the valence band offset between metalorganic chemical vapor deposition grown $(ZnGe)_{1-x}Ga_{2x}N_2$, for $x = 0$ and $0.06$, and $GaN$ using X-ray photoemission spectroscopy. The valence band of $ZnGeN_2$ was found to lie $1.45-1.65 eV$ above that of $GaN$. This result agrees well with the value predicted by first-principles density functional theory calculations using the local density approximation for the potential profile and quasiparticle self-consistent GW calculations of the band edge states relative to the potential. For $(ZnGe)_{0.94}Ga_{0.12}N_2$ the value was determined to be $1.29 eV$, $~10-20\%$ lower than that of $ZnGeN_2$. The experimental determination of the large band offset between $ZnGeN_2$ and $GaN$ provides promising alternative solutions to address challenges faced with pure III-nitride-based structures and devices.

The performance of ultra-wide band gap materials like $\beta$-Ga$_\mathrm{2}$O$_\mathrm{3}$ is critically dependent on achieving high average electric fields within the active region of the device. In this report, we show that high-k gate dielectrics like BaTiO$_\mathrm{3}$ can provide an efficient field management strategy by improving the uniformity of electric field profile in the gate-drain region of lateral field effect transistors. Using this strategy, we were able to achieve high average breakdown fields of 1.5 MV/cm and 4 MV/cm at gate-drain spacing (L$_\mathrm{gd}$) of 6 um and 0.6 um respectively in $\beta$-Ga$_\mathrm{2}$O$_\mathrm{3}$, at a high channel sheet charge density of 1.8x10$^\mathrm{13}$cm$^\mathrm{-2}$. The high sheet charge density together with high breakdown field enabled a record power figure of merit (V$^\mathrm{2}$$_\mathrm{br}$/R$_\mathrm{on}$) of 376 MW/cm$^\mathrm{2}$ at a gate-drain spacing of 3 um.

A new record-high room temperature electron Hall mobility (${\mu}_{RT} = 194\space cm^{2}/V\space s$ at $n\sim 8\times 10^{15}\space cm^{-3}$) for ${\beta}$-Ga2O3 is demonstrated in the unintentionally doped thin film grown on (010) semi-insulating substrate via metalorganic chemical vapor deposition (MOCVD). A peak electron mobility of $\sim 9500\space cm^{2}/V\space s$ is achieved at 45 K. Further investigation on the transport properties indicate the existence of sheet charges near the epi-layer/substrate interface. Si is identified as the primary contributor to the background carrier in both the epi-layer and the interface, originated from both surface contamination as well as growth environment. Pre-growth hydrofluoric acid cleaning of the substrate lead to an obvious decrease of Si impurity both at interface and in epi-layer. In addition, the effect of MOCVD growth condition, particularly the chamber pressure, on the Si impurity incorporation is studied. A positive correlation between the background charge concentration and the MOCVD growth pressure is confirmed. It is noteworthy that in a ${\beta}$-Ga2O3 film with very low bulk charge concentration, even a reduced sheet charge density can play an important role in the charge transport properties., Comment: 19 pages, 5 figures

We have studied the properties of Si, Ge shallow donors and Fe, Mg deep acceptors in $\beta$-Ga2O3 through temperature dependent van der Pauw and Hall effect measurements of samples grown by a variety of methods, including edge-defined film-fed (EFG), Czochralski (CZ), molecular beam epitaxy (MBE), and low pressure chemical vapor deposition (LPCVD). Through simultaneous, self-consistent fitting of the temperature dependent carrier density and mobility, we are able to accurately estimate the donor energy of Si and Ge to be 30 meV in $\beta$-Ga2O3. Additionally, we show that our measured Hall effect data are consistent with Si and Ge acting as typical shallow donors, rather than shallow DX centers. High temperature Hall effect measurement of Fe doped $\beta$-Ga2O3 indicates that the material remains weakly n-type even with the Fe doping, with an acceptor energy of 860 meV relative to the conduction band for the Fe deep acceptor. Van der Pauw measurements of Mg doped Ga2O3 indicate an activation energy of 1.1 eV, as determined from the temperature dependent conductivity., Comment: 19 pages, 6 figures

Beta gallium oxide (\beta-Ga2O3) is an emerging ultrawide band gap (4.5 - 4.9 eV) semiconductor with attractive properties for future power electronics, optoelectronics, and sensors for detecting gases and ultraviolet radiation. \beta-Ga2O3 thin films made by various methods are being actively studied toward such devices. Here, we report on the experimental demonstration of single-crystal \beta-Ga2O3 nanomechanical resonators using \beta-Ga2O3 nanoflakes grown via low-pressure chemical vapor deposition (LPCVD). By investigating \beta-Ga2O3 circular drumhead structures, we demonstrate multimode nanoresonators up to the 6th mode in high and very high frequency (HF / VHF) bands, and also realize spatial mapping and visualization of the multimode motion. These measurements reveal a Young's modulus of E_Y = 261 GPa and anisotropic biaxial built-in tension of 37.5 MPa and 107.5 MPa. We find that thermal annealing can considerably improve the resonance characteristics, including ~40% upshift in frequency and ~90% enhancement in quality (Q) factor. This study lays a foundation for future exploration and development of mechanically coupled and tunable \beta-Ga2O3 electronic, optoelectronic, and physical sensing devices., Comment: 18 pages, 6 figures (SI: 12 pages, 6 figures, 2 tables)

We report on the first beta gallium oxide (\beta-Ga2O3) crystal feedback oscillator built by employing a vibrating \beta-Ga2O3 nanoresonator as the frequency reference for real-time middle ultraviolet (MUV) light detection. We fabricate suspended \beta-Ga2O3 nanodevices through synthesis of \beta-Ga2O3 nanoflakes using low-pressure chemical vapor deposition (LPCVD), and dry transfer of nanoflakes on microtrenches. Open-loop tests reveal a resonance of the \beta-Ga2O3 device at ~30 MHz. A closed-loop oscillator is then realized by using a combined optical-electrical feedback circuitry, to perform real-time resonant sensing of MUV irradiation. The oscillator exposed to cyclic MUV irradiation exhibits resonant frequency downshifts, with a measured responsivity of $\mathscr{R}$ = -3.1 Hz/pW and a minimum detectable power of \delta Pmin = 0.53 nW for MUV detection., Comment: 4 pages, 5 figures, IEEE Electron Device Letters, vol. 39, xxx-xxx (2018)