Search

The generation of large spin currents, and the associated spin torques, which are at the heart of modern spintronics, have long been achieved by charge-to-spin conversion mechanisms, i.e. the spin Hall effect and/or the Rashba effect, intrinsically linked to a strong spin-orbit coupling. Recently, a novel path has been predicted and observed for achieving significant current-induced torques originating from light elements, hence possessing a weak spin-orbit interaction. These findings point out to the potential involvement of the orbital counterpart of electrons, namely the orbital Hall and orbital Rashba effects. In this study, we aim at quantifying these orbital-related contributions to the effective torques acting on a thin Co layer in different systems. First, in Pt|Co|Cu|AlOx stacking, we demonstrate a comparable torque strength coming from the conversion due to the orbital Rashba effect at the Cu|AlOx interface and the one from the effective spin Hall effect in bottom Pt|Co system. Secondly, in order to amplify the orbital-to-spin conversion, we investigate the impact of an intermediate Pt layer in Co|Pt|Cu|CuOx. From the Pt thickness dependence of the effective torques determined by harmonic Hall measurements complemented by spin Hall magneto-resistance and THz spectroscopy experiments, we demonstrate that a large orbital Rashba effect is present at the Cu|CuOx interface, leading to a twofold enhancement of the net torques on Co for the optimal Pt thickness. Our findings not only demonstrate the crucial role that orbital currents can play in low-dimensional systems with weak spin-orbit coupling, but also reveal that they enable more energy efficient manipulation of magnetization in spintronic devices., Comment: 12 pages,6 figures

The helicity of 3D topological insulator surface states has drawn significant attention in spintronics owing to spin-momentum locking where the carriers' spin is oriented perpendicular to their momentum. This property can provide an efficient method to convert charge currents into spin currents, and vice-versa, through the Rashba-Edelstein effect. However, experimental signatures of these surface states to the spin-charge conversion are extremely difficult to disentangle from bulk state contributions. Here, we combine spin- and angle-resolved photo-emission spectroscopy, and time-resolved THz emission spectroscopy to categorically demonstrate that spin-charge conversion arises mainly from the surface state in Bi$_{1-x}$Sb$_x$ ultrathin films, down to few nanometers where confinement effects emerge. We correlate this large conversion efficiency, typically at the level of the bulk spin Hall effect from heavy metals, to the complex Fermi surface obtained from theoretical calculations of the inverse Rashba-Edelstein response. %We demonstrate this for film thickness down to a few nanometers, Both surface state robustness and sizeable conversion efficiency in epitaxial Bi$_{1-x}$Sb$_x$ thin films bring new perspectives for ultra-low power magnetic random-access memories and broadband THz generation., Comment: 23 pages, 3 figures

The ability of spin-orbit interactions to convert charge current into spin current, most often in the bulk of heavy metal thin films, has been the hallmark of spintronics in the last decade. In this study, we demonstrate how the insertion of light metal element interface profoundly affects both the nature of spin-orbit torque and its efficiency in terms of damping-like ($H_{\text{DL}}$) and field-like ($H_{\text{FL}}$) effective fields in ultrathin Co ferromagnet. Indeed, we measure unexpectedly large $H_{\text{FL}}$/$H_{\text{DL}}$ ratio ($\sim$2.5) upon inserting a 1.4 nm thin Al layer in Pt|Co|Al|Pt as compared to a similar stacking including Cu instead of Al. From our modelling, these results strongly evidence the presence of large Rashba interaction at Co|Al interface producing a giant $H_{\text{FL}}$, which was not expected from a metallic interface. The occurrence of such enhanced torques from an interfacial origin is further validated by demonstrating current-induced magnetization reversal showing a significant decrease of the critical current for switching.

Spintronic terahertz (THz) emitters (STE) based on the inverse spin Hall effect in ferromagnetic/heavy metal (FM/HM) heterostructures have become important sources for THz pulse generation. The design, materials and control of these interfaces at the nanometer level has become vital to engineer their THz emission properties.In this work, we present studies of the optimization of such structures through a multi-pronged approach, taking advantage of material and interface engineering to enhance the THz spintronic emission. This includes: the application of multi-stacks of HM/FM junctions and their application to trilayer structures, the use of spin-sinks to simultaneously enhance the THz emitted fields and reduce the use of thick Pt layers to reduce optical absorption, and the use of semi-metals to increase the spin polarization and thus the THz emission. Through these approaches, significant enhancements of the THz field can be achieved. Importantly, taking into account the optical absorption permits to elucidate novel phenomena such as the relation between the spin diffusion length and the spin-sink using THz spectroscopy, as well as possibly distinguishing between self and interface spin-to-charge conversion in semi-metals., Comment: submitted to Applied Physics Letters (2022)

Spintronic structures are extensively investigated for their spin orbit torque properties, required for magnetic commutation functionalities. Current progress in these materials is dependent on the interface engineering for the optimization of spin transmission. Here, we advance the analysis of ultrafast spin-charge conversion phenomena at ferromagnetic-transition metal interfaces due to their inverse spin-Hall effect properties. In particular the intrinsic inverse spin Hall effect of Pt-based systems and extrinsic inverse spin-Hall effect of Au:W and Au:Ta in NiFe/Au:(W,Ta) bilayers are investigated. The spin-charge conversion is probed by complementary techniques -- ultrafast THz time domain spectroscopy in the dynamic regime for THz pulse emission and ferromagnetic resonance spin-pumping measurements in the GHz regime in the steady state -- to determine the role played by the material properties, resistivities, spin transmission at metallic interfaces and spin-flip rates. These measurements show the correspondence between the THz time domain spectroscopy and ferromagnetic spin-pumping for the different set of samples in term of the spin mixing conductance. The latter quantity is a critical parameter, determining the strength of the THz emission from spintronic interfaces. This is further supported by ab-initio calculations, simulations and analysis of the spin-diffusion and spin relaxation of carriers within the multilayers in the time domain, permitting to determine the main trends and the role of spin transmission at interfaces. This work illustrates that time domain spectroscopy for spin-based THz emission is a powerful technique to probe spin-dynamics at active spintronic interfaces and to extract key material properties for spin-charge conversion., Comment: 20 pages

Relating magnetotransport properties to specific spin textures at surfaces or interfaces is an intense field of research nowadays. Here, we investigate the variation of the electrical resistance of Ge(111) grown epitaxially on semi-insulating Si(111) under the application of an external magnetic field. We find a magnetoresistance term which is linear in current density j and magnetic field B, hence odd in j and B, corresponding to a unidirectional magnetoresistance. At 15 K, for I = 10 $\mu$A (or j = 0.33 A/m) and B = 1 T, it represents 0.5 % of the zero field resistance, a much higher value compared to previous reports on unidirectional magnetoresistance. We ascribe the origin of this magnetoresistance to the interplay between the externally applied magnetic field and the current-induced pseudo-magnetic field in the spin-splitted subsurface states of Ge(111). This unidirectional magnetoresistance is independent of the current direction with respect to the Ge crystal axes. It progressively vanishes, either using a negative gate voltage due to carrier activation into the bulk (without spin-splitted bands), or by increasing the temperature due to the Rashba energy splitting of the subsurface states lower than $\sim$58 k$_B$. The highly developed technologies on semiconductor platforms would allow the rapid optimization of devices based on this phenomenon., Comment: 5 pages, 4 figures

We present the analysis of the spin signals obtained in NiFe based metallic lateral spin valves. We exploit the spin dependent diffusive equations in both the conventional 1D analytic modeling as well as in 3D Finite Element Method simulations. Both approaches are used for extracting the spin diffusion length $l_{sf}^{N}$ and the effective spin polarization $P_{eff}$ in Py/Al, Py/Cu and Py/Au based lateral nano-structures at both $300\,K$ and $77\,K$. Both the analytic modeling and 3D Finite Element Method simulations give consistent results. Combination of both models provides a powerful tool for reliable spin transport characterization in all metallic spin valves and gives an insight into the spin/charge current and spin accumulations 3D distributions in these devices. We provide the necessary ingredients to develop the 3D finite element modeling of diffusive spin transport., Comment: 8 pages, 6 figures

Due to the difficulty to grow high quality semiconductors on ferromagnetic metals, the study of spin diffusion transport in Si was only limited to lateral geometry devices. In this work, by using ultra-high vacuum wafer-bonding technique, we have successfully fabricated metal semiconductor metal CoFeB/MgO/Si/Pt vertical structures. We hereby demonstrate pure spin-current injection and transport in the perpendicular current flow geometry over a distance larger than 2\mu m in n-type Si at room temperature. In those experiments, a pure propagating spin-current is generated via ferromagnetic resonance spin-pumping and converted into a measurable voltage by using the inverse spin-Hall effect occurring in the top Pt layer. A systematic study by varying both Si and MgO thicknesses reveals the important role played by the localized states at the MgO/Si interface for the spin-current generation. Proximity effects involving indirect exchange interactions between the ferromagnet and the MgO/Si interface states appears to be a prerequisite to establish the necessary out-of-equilibrium spin-population in Si under the spin-pumping action.

We evidenced unconventionnal Anomalous Hall Effects (AHE) in 3d/5d (Co0.2nm/Ni0.6nm)N multilayers grown on a thin Pt layer or thin Au:W alloy. The inversion observed on AHE originates from the opposite sign of the spin-orbit coupling of Pt compared to Ni. Via advanced simulations methods for the description of the spin-current profiles based on the spin-dependent Boltzmann formalism, we extracted the spin Hall angle (SHA) of Pt and (Co/Ni) as well as the relevant transport parameters. The extracted SHA for Pt, +20%, is opposite to the one of (Co/Ni), giving rise to an effective AHE inversion for thin (Co/Ni) multilayers (N < 17). The spin Hall angle in Pt is found to be larger than the one previously measured in combined spin-pumping inverse spin-Hall effect experiments in a geometry of current perpendicular to plane. Whereas magnetic proximity effects cannot explain the effect, spin-current leakage and anisotropic electron scattering at Pt/(Co,Ni) interfaces fit the experiments., Comment: 7 pages, 2 figures

The emission of circularly polarized light from a single quantum dot relies on the injection of carriers with well-defined spin polarization. Here we demonstrate single dot electroluminescence (EL) with a circular polarization degree up to 35% at zero applied magnetic field. The injection of spin polarized electrons is achieved by combining ultrathin CoFeB electrodes on top of a spin-LED device with p-type InGaAs quantum dots in the active region. We measure an Overhauser shift of several $\mu$eV at zero magnetic field for the positively charged exciton (trion X$^+$) EL emission, which changes sign as we reverse the injected electron spin orientation. This is a signature of dynamic polarization of the nuclear spins in the quantum dot induced by the hyperfine interaction with the electrically injected electron spin. This study paves the way for electrical control of nuclear spin polarization in a single quantum dot without any external magnetic field., Comment: initial version, final version to appear in ACS Nano Letters

We experimentally investigate the current-induced magnetization reversal in Pt/[Co/Ni]$_3$/Al multilayers combining the anomalous Hall effect and magneto-optical Kerr effect techniques in crossbar geometry. The magnetization reversal occurs through nucleation and propagation of a domain of opposite polarity for a current density of the order of 0.3 TA/m$^2$. In these experiments we demonstrate a full control of each stage: i)the {\O}rsted field controls the domain nucleation and ii) domain-wall propagation occurs by spin torque from the Pt spin Hall effect. This scenario requires an in-plane magnetic field to tune the domain wall center orientation along the current for efficient domain wall propagation. Indeed, as nucleated, domain walls are chiral and N\'eel like due to the interfacial Dzyaloshinskii-Moriya interaction., Comment: 5 pages, 3 figures

We present experimental results on the conversion of a spin current into a charge current by spin pumping into the Dirac cone with helical spin polarization of the elemental topological insulator (TI) {\alpha}-Sn[1-3]. By angle-resolved photoelectron spectroscopy (ARPES) we first confirm that the Dirac cone at the surface of {\alpha}-Sn (0 0 1) layers subsists after covering with Ag. Then we show that resonant spin pumping at room temperature from Fe through Ag into {\alpha}-Sn layers induces a lateral charge current that can be ascribed to the Inverse Edelstein Effect[4-5]. Our observation of an Inverse Edelstein Effect length[5-6] much longer than for Rashba interfaces[5-10] demonstrates the potential of the TI for conversion between spin and charge in spintronic devices. By comparing our results with data on the relaxation time of TI free surface states from time-resolved ARPES, we can anticipate the ultimate potential of TI for spin to charge conversion and the conditions to reach it., Comment: 14 pages, 5 figures

The knowledge of the spin diffusion length $\lambda_{A}$ is a prerequisite for the estimation of the spin Hall angle. We investigate spin current absorption of materials with small $\lambda_{A}$ using AuW stripes inserted in lateral spin-valves. Width variations of the AuW stripe lead to drastic changes of the spin absorption, which cannot be explained by conventional analysis. We show that the spin-current polarization and the spin accumulation attenuation in the vicinity of the spin absorber must to be precisely taken into account for accurate estimation of $\lambda_{A}$. We propose an analytical model supported by numerical calculations that allows to extract proper $\lambda_{A}$ values of spin Hall effect materials.

We consider the excitation of large amplitude gyrotropic vortex core precession in a Permalloy nanodisk by the torques originating from the in-plane microwave current flowing along the interface of the Permalloy/Bi$_2$Se$_3$ heterostructures, in which the huge charge-to-spin conversion ratio is observed \cite{Mellnik-2014}. We consider analytically and by micromagnetic modelling the dependence of this excitation on the frequency and magnitude of the microwave current. The analogies of the vortex dynamics and the Landau phase transitions theory is demonstrated. These findings open the possibility to excite gyrotropic vortex motion with the current densities far lower than by any other means., Comment: 6 pages, 2 figures

We report an experimental study of a gold-tungsten alloy (7% at. W concentration in Au host) displaying remarkable properties for spintronics applications using both magneto-transport in lateral spin valve devices and spin-pumping with inverse spin Hall effect experiments. A very large spin Hall angle of about 10% is consistently found using both techniques with the reliable spin diffusion length of 2 nm estimated by the spin sink experiments in the lateral spin valves. With its chemical stability, high resistivity and small induced damping, this AuW alloy may find applications in the nearest future.

Through combined ferromagnetic resonance, spin-pumping and inverse spin Hall effect experiments in Co|Pt bilayers and Co|Cu|Pt trilayers, we demonstrate consistent values of spin diffusion length $\ell_{\rm sf}^{\rm Pt}=3.4\pm0.4$ nm and of spin Hall angle $\theta_{\rm SHE}^{\rm Pt}=0.051\pm0.004$ for Pt. Our data and model emphasize on the partial depolarization of the spin current at each interface due to spin-memory loss. Our model reconciles the previously published spin Hall angle values and explains the different scaling lengths for the ferromagnetic damping and the spin Hall effect induced voltage., Comment: 6 pages, 3 figures (main text) and 8 pages supplementary. Published with small modifications in Phys. Rev. Lett

We have measured the inverse spin Hall effect (ISHE) in \textit{n}-Ge at room temperature. The spin current in germanium was generated by spin pumping from a CoFeB/MgO magnetic tunnel junction in order to prevent the impedance mismatch issue. A clear electromotive force was measured in Ge at the ferromagnetic resonance of CoFeB. The same study was then carried out on several test samples, in particular we have investigated the influence of the MgO tunnel barrier and sample annealing on the ISHE signal. First, the reference CoFeB/MgO bilayer grown on SiO$_{2}$ exhibits a clear electromotive force due to anisotropic magnetoresistance and anomalous Hall effect which is dominated by an asymmetric contribution with respect to the resonance field. We also found that the MgO tunnel barrier is essential to observe ISHE in Ge and that sample annealing systematically lead to an increase of the signal. We propose a theoretical model based on the presence of localized states at the interface between the MgO tunnel barrier and Ge to account for these observations. Finally, all of our results are fully consistent with the observation of ISHE in heavily doped $n$-Ge and we could estimate the spin Hall angle at room temperature to be $\approx$0.001., Comment: 34 pages, 14 figures

In this letter, we first show electrical spin injection in the germanium conduction band at room temperature and modulate the spin signal by applying a gate voltage to the channel. The corresponding signal modulation agrees well with the predictions of spin diffusion models. Then by setting a temperature gradient between germanium and the ferromagnet, we create a thermal spin accumulation in germanium without any tunnel charge current. We show that temperature gradients yield larger spin accumulations than pure electrical spin injection but, due to competing microscopic effects, the thermal spin accumulation in germanium remains surprisingly almost unchanged under the application of a gate voltage to the channel., Comment: 7 pages, 3 figures

Electrical spin injection into semiconductors paves the way for exploring new phenomena in the area of spin physics and new generations of spintronic devices. However the exact role of interface states in spin injection mechanism from a magnetic tunnel junction into a semiconductor is still under debate. In this letter, we demonstrate a clear transition from spin accumulation into interface states to spin injection in the conduction band of $n$-Ge. We observe spin signal amplification at low temperature due to spin accumulation into interface states followed by a clear transition towards spin injection in the conduction band from 200 K up to room temperature. In this regime, the spin signal is reduced down to a value compatible with spin diffusion model. More interestingly, we demonstrate in this regime a significant modulation of the spin signal by spin pumping generated by ferromagnetic resonance and also by applying a back-gate voltage which are clear manifestations of spin current and accumulation in the germanium conduction band., Comment: 5 pages, 4 figures

Using an advanced tight-binding approach, we estimate the anisotropy of the tunnel transmission associated with the rotation of the 5/2 spin of a single Mn atom forming an acceptor state in GaAs and located near an AlGaAs tunnel barrier. Significant anisotropies in both in-plane and out-of-plane geometries are found, resulting from the combination of the large spin-orbit coupling associated with the p-d exchange interaction, cubic anisotropy of heavy-hole dispersion and the low C2v symmetry of the chemical bonds., Comment: 4 pages, 3 figures

Although the creation of spin polarization in various non-magnetic media via electrical spin injection from a ferromagnetic tunnel contact has been demonstrated, much of the basic behavior is heavily debated. It is reported here for semiconductor/Al2O3/ferromagnet tunnel structures based on Si or GaAs that local magnetostatic fields arising from interface roughness dramatically alter and even dominate the accumulation and dynamics of spins in the semiconductor. Spin precession in the inhomogeneous magnetic fields is shown to reduce the spin accumulation up to tenfold, and causes it to be inhomogeneous and non-collinear with the injector magnetization. The inverted Hanle effect serves as experimental signature. This interaction needs to be taken into account in the analysis of experimental data, particularly in extracting the spin lifetime and its variation with different parameters (temperature, doping concentration). It produces a broadening of the standard Hanle curve and thereby an apparent reduction of the spin lifetime. For heavily doped n-type Si at room temperature it is shown that the spin lifetime is larger than previously determined, and a new lower bound of 0.29 ns is obtained. The results are expected to be general and occur for spins near a magnetic interface not only in semiconductors but also in metals, organic and carbon-based materials including graphene, and in various spintronic device structures., Comment: Final version, with text restructured and appendices added (25 pages, 9 figures). To appear in Phys. Rev. B