Search

Freestanding oxide membranes constitute an intriguing material platform for new functionalities and allow integration of oxide electronics with technologically important platforms such as silicon. Sambri et al. recently reported a method to fabricate freestanding LaAlO3/SrTiO3 (LAO/STO) membranes by spalling of strained heterostructures. Here, we first develop a scheme for the high-yield fabrication of membrane devices on silicon. Second, we show that the membranes exhibit metallic conductivity and a superconducting phase below ∼200 mK. Using anisotropic magnetotransport we extract the superconducting phase coherence length ξ ≈ 36-80 nm and establish an upper bound on the thickness of the superconducting electron gas d ≈ 17-33 nm, thus confirming its two-dimensional character. Finally, we show that the critical current can be modulated using a silicon-based backgate. The ability to form superconducting nanostructures of LAO/STO membranes, with electronic properties similar to those of the bulk counterpart, opens opportunities for integrating oxide nanoelectronics with silicon-based architectures.

The control of Mott phase is intertwined with the spatial reorganization of the electronic states. Out-of-equilibrium driving forces typically lead to electronic patterns that are absent at equilibrium, whose nature is however often elusive. Here, we unveil a nanoscale pattern formation in the Ca$_2$RuO$_4$ Mott insulator. We demonstrate how an applied electric field spatially reconstructs the insulating phase that, uniquely after switching off the electric field, exhibits nanoscale stripe domains. The stripe pattern has regions with inequivalent octahedral distortions that we directly observe through high-resolution scanning transmission electron microscopy. The nanotexture depends on the orientation of the electric field, it is non-volatile and rewritable. We theoretically simulate the charge and orbital reconstruction induced by a quench dynamics of the applied electric field providing clear-cut mechanisms for the stripe phase formation. Our results open the path for the design of non-volatile electronics based on voltage-controlled nanometric phases., 14 pages, 9 figures

In this work, the irreversible effects of an applied electric field on the magnetotransport properties of LaAlO3/SrTiO3 conducting interfaces are investigated, with focus on their multiband character. Samples of different types, namely with either crystalline or amorphous LaAlO3 overlayer, are studied. The two-band analysis highlights the similarity of the electronic properties of crystalline and amorphous interfaces, regardless much different carrier densities and mobilities. Furthermore, filling and depletion of the two bands follow very similar patterns, at least in qualitative terms, in the two types of samples. In agreement with previous works on crystalline interfaces, it is observed that an irreversible charge depletion takes place after application of a first positive back gate voltage step. Such charge depletion affects much more, in relative terms, the higher and three-dimensional dyz, dzx bands than the lower and bidimensional dxy, driving the system through the Lifshitz transition from two-band to single band behavior. The quantitative analysis of experimental data evidences the roles of disorder, apparent in the depletion regime, and temperature. Noteworthy, filling and depletion of the two bands follow very similar patterns in crystalline and amorphous samples, at least in qualitative terms, regardless much different carrier densities and mobilities.

The discovery of 2D conductivity at the LaAlO3/SrTiO3 interface has been linking, for over a decade, two of the major current research fields in materials science: correlated transition-metal-oxide systems and low-dimensional systems. Notably, despite the 2D nature of the interfacial electron gas, the samples are 3D objects with thickness in the mm range. This prevented researchers so far from adopting strategies that are only viable for fully 2D materials, or from effectively exploiting degrees of freedom related to strain, strain gradient and curvature. Here a method based on pure strain engineering for obtaining freestanding LaAlO3/SrTiO3 membranes with micrometer lateral dimensions is demonstrated. Detailed transmission electron microscopy investigations show that the membranes are fully epitaxial and that their curvature results in a huge strain gradient, each layer showing a mixed compressive/tensile strain state. Electronic devices are fabricated by realizing ad hoc circuits for individual micro-membranes transferred on silicon chips. The samples exhibit metallic conductivity and electrostatic field effect like 2D-electron systems in bulk heterostructures. The results open a new path for adding oxide functionalities into semiconductor electronics, potentially allowing for ultra-low voltage gating of a superconducting transistors, micromechanical control of the 2D electron gas mediated by ferroelectricity and flexoelectricity, and on-chip straintronics.

By a combination of optical second harmonic generation and transport measurements, we have investigated interfaces formed by either crystalline or amorphous thin films of LaAlO3 grown on TiO2-terminated SrTiO3(001) substrates. Our approach aims at disentangling the relative role of intrinsic and extrinsic doping mechanisms in the formation of the two-dimensional electron gas. The different nature of the two mechanisms is revealed when comparing the sample response variation as a function of temperature during annealing in air. However, before the thermal treatment, the two types of interfaces show almost the same intensity of the second harmonic signal, provided the overlayer thickness is the same. As we will show, the second harmonic signal is proportional to the depth of the potential well confining the charges at the interface. Therefore, our result demonstrates that this depth is about the same for the two different material systems. This conclusion supports the idea that the electronic properties of the two-dimensional electron gas are almost independent of the doping mechanism of the quantum well.

Combining reflection high-energy electron diffraction, high-resolution transmission electron microscopy, and high-angle annular dark field scanning transmission electron microscopy we unveil the existence of a peculiar transition from a three-dimensional to a two-dimensional growth mode in anatase TiO2/LaAlO3 heterostructures. Such a growth dynamics is accompanied by Al interdiffusion from substrate to the growing film up to a critical thickness of 20 nm. With the extra support of ab initio calculations, we show that the crossover between the two growth modes corresponds to the formation of two distinct regions characterized by (103)- and (101)-oriented crystallographic shear superstructures, occurring in the upmost film region and in proximity of the film/substrate interface, respectively. © 2013 Springer Science+Business Media Dordrecht.

The time-resolved photoconductance of amorphous and crystalline LaAlO$_3$/SrTiO$_3$ interfaces, both hosting an interfacial 2-dimensional electron gas, is investigated under irradiation by variable-wavelengths, visible or ultraviolet photons. Unlike bare SrTiO$_3$ single crystals, showing relatively small photoconductance effects, both kinds of interfaces exhibit an intense and highly persistent photoconductance with extraordinarily long characteristic times. The temporal behaviour of the extra photoinduced conductance persisting after light irradiation shows a complex dependence on interface type (whether amorphous or crystalline), sample history and irradiation wavelength. \textcolor{black}{The experimental results indicate that different mechanisms of photoexcitation are responsible for the photoconductance of crystalline and amorphous LaAlO$_3$/SrTiO$_3$ interfaces under visible light. We propose that the response of crystalline samples is mainly due to the promotion of electrons from the valence bands of both SrTiO$_3$ and LaAlO$_3$. This second channel is less relevant in amorphous LaAlO$_3$/SrTiO$_3$, where the higher density of point defects plays instead a major role., 8 pages, 5 figures, 3 tables, accepted on Scientific Reports 2015

The electronic properties of NdGaO3/SrTiO3, LaGaO3/SrTiO3 and LaAlO3/SrTiO3 interfaces, all showing an insulator-to-metal transition as a function of the overlayer-thickness, are addressed in a comparative study based on x-ray absorption, x-ray photoemission and resonant photoemission spectroscopy. The nature of the charge carriers, their concentration and spatial distribution as well as the interface band alignments and the overall interface band diagrams are studied and quantitatively evaluated. The behavior of the three analyzed heterostructures is found to be remarkably similar. The valence band edge of all the three overlayers aligns to that of bulk SrTiO3. The near-interface SrTiO3 layer is affected, at increasing overlayer thickness, by the building-up of a confining potential. This potential bends both the valence and the conduction band downwards. The latter one crossing the Fermi energy in the proximity of the interface and determines the formation of an interfacial band offset growing as a function of thickness. Quite remarkably, but in agreement with previous reports for LaAlO3/SrTiO3, no electric field is detected inside any of the polar overlayers. The essential phenomenology emerging from our findings is discussed on the base of different alternative scenarios regarding the origin of interface carriers and their interaction with an intense photon beam.

Optical second harmonic generation is proposed as a tool for non-invasive, non-destructive, real-time, in-situ imaging of oxide epitaxial film growth. The films can be monitored by surface imaging with a lateral resolution of

Functional perovskite oxides are recognized for their stunningly rich physics and for their potential as next-generation electronic materials. Their properties include high Tc superconductivity, colossal magnetoresistance, record-high dielectric/ferroelectric/piezoelectric performances, multiferroic behavior, resistive switching behavior, giant thermoelectric and magnetocaloric effects, giant ionic conduction, and catalytic behavior. Due to their intrinsic chemical and crystal similarities, functional oxides can be stacked in multilayer heterostructures exhibiting an astonishing degree of epitaxial perfection. Such artificial systems not only allow one to combine in a single device the functionalities of their individual layers, but often reveal an even wider range of emergent novel properties that can be surprisingly different from those of the single building blocks. The goal of this issue of MRS Bulletin is to present the state of the art of oxide interfaces in inscience and technology. Here we provide an introduction to their properties, serving as a base for the following topical articles.

We present various concepts and experimental procedures to fabricate biepitaxial YBa 2Cu 3O 7-x grain boundary Josephson junctions. Different types of structures can be realized including "π-loops" in which one of the junctions is intrinsically π-phase shifted. Due to its versatility the biepitaxial technique offers the possibility to investigate basic aspects of the physics of grain boundary Josephson junctions, and also the influence of intrinsic and extrinsic d-wave induced effects in transport properties. Further, we discuss the possibility to produce circuits in which "0-" and "π-loops" are controllably located on the same chip, and intrinsic d-wave effects can be exploited.

The effects of the order parameter symmetry and the interface grain boundary orientation on the transport properties of YBa/sub 2/Cu/sub 3/O/sub 7-x/ biepitaxial grain boundary junctions have been investigated. 45/spl deg/ [100] tilt and twist junctions on SrTiO/sub 3/ [110] and MgO [110] substrates by employing respectively MgO and SrTiO/sub 3/ as seed layers have been fabricated. More complex junctions by using CeO as seed layers have also been fabricated and analyzed. The analysis of experimental data points towards a predominant d-wave symmetry of the superconductive order parameter.

YBa/sub 2/Cu/sub 3/O/sub 7/-/sub x/ junctions and dc SQUIDs have been realized by employing 45/spl deg/ a-axis tilt grain boundaries through a fabrication procedure based on the biepitaxial technique. YBa/sub 2/Cu3O/sub 7-x/ grows mainly oriented [103] on SrTiO/sub 3/ and [001] on the MgO seed layer. A wide characterization of the tilt junctions and SQUID properties has been carried out. High values of the I/sub C/R/sub N/ quality factor and of the magnetic flux-to-voltage transfer parameter have been obtained, The observed phenomenology confirms differences from the one typical of 45/spl deg/ c-axis tilt grain boundary junctions and gives important information on the nature of the current steps appearing at finite voltages in the current-voltage characteristics. These devices could also have some impact on experiments designed to study the symmetry of the order parameter, exploiting their microstructure and anisotropic properties. A maximum speed of Josephson vortices as calculated from the voltage step values, of the order of 2 10/sup 6/ m/sec is obtained, which encourages high frequency applications.

A YBa/sub 2/Cu/sub 3/O/sub 7-x/ artificial grain boundary Josephson junction mas fabricated on to a [110] SrTiO/sub 3/ substrate employing a MgO seed layer. YBa/sub 2/Cu/sub 3/O/sub 7-x/ grows mainly oriented (103) on SrTiO/sub 3/ and [001] on the seed layer. An artificial 45/spl deg/ a or b axis tilt or twist boundary can occur according to the orientation of the MgO edge with respect to the [001] in plane direction of the substrate. Josephson junctions of good quality and excellent reproducibility were obtained in microbridges patterned across the grain boundary. Typical features of the phenomenology of high critical temperature superconductor (HTCS) Josephson junction were observed. The maximum value of the I/sub C/R/sub N/ product is of the order of 2-3 millivolts at T=4.2 K and of the order of 50 /spl mu/V at T=77 K respectively. The modulation of the critical current with the external applied magnetic field confirms the Josephson nature of the current in the weak link.