Search

The forced air cooling system plays an important role in the safe operation of power converters. Condition monitoring its health status can improve the reliability of power converter and reduce the cost of unscheduled maintenance due to over-heating. This letter proposed to use the natural frequency of thermal network as an indicator to monitor the aging process of cooling system. We show that the degradation of the cooling system can be monitored by detecting the variation of thermal network natural frequency. Experimental tests on a three-phase dc/ac converter with forced air cooling system are performed to verify the effectiveness of proposed method. This method is simple to implement and does not need to measure the power loss. Moreover, it enables the concurrent monitoring of multiple components in the cooling system. [ABSTRACT FROM AUTHOR]

This paper proposes a thermal network parameter estimation method for insulated-gate bipolar transistor (IGBT) modules using the junction temperature cooling curve. The proposed method finds the RC parameters of a fourth-order Cauer network by establishing a relationship between RC parameters and time constants of junction temperature response curves. Experimental tests are performed to validate the accuracy of the developed method. Results show that the difference of total thermal resistance between the proposed method and IEC standard is below 2%. Advantages of the proposed method over the existing methods are that the proposed method does not need 1) to know the power loss information of IGBT and 2) to heat the IGBT module up to thermal steady state. In addition, we show that the identified RC parameters can be used for condition monitoring and junction temperature estimation. [ABSTRACT FROM AUTHOR]

The dc-link capacitors are important components that tend to be one of the weakest part of power converters. Thus, it is necessary to monitor the aging parameters of dc-link capacitors in valuable power electronic systems. This paper proposes a simple yet effective variable electrical network (VEN) condition monitoring method for dc-link capacitors in three-phase pulsewidth modulation (PWM) ac–dc–ac power converters. The capacitance (C) and equivalent series resistance of dc-link capacitors are estimated through the designed VEN unit during the discharging process. This VEN method does not need the current sensor or injecting signals into the control loop. The above property is favorable for the hardware and controller design. Besides, the designed monitoring circuit can be an external unit or a built-in unit which offers a flexible solution for electrical devices. When the designed VEN is used as an external unit, neither the hardware design nor the programs in the controller needs to change, which is practical and economic for electrical devices in use. Experiments are carried out in a 55 kW ac–dc–ac inverter with different capacitors. The experiment results prove the method to be effective and accurate. [ABSTRACT FROM AUTHOR]

• A quasi-online condition monitoring technique for wind power converter is proposed. • This method enables concurrent health monitoring of power module and cooling system. • This approach does not need to measure the power loss and junction temperature. The power converter plays an important role in the energy conversion and management of wind turbine system. It is one of the core components in the system, but also one of the most prone to fail components according to industry-wide survey. Condition monitoring of power converter can improve the reliable operation of wind turbine system and reduce its unscheduled downtime. In this paper, a novel quasi-online monitoring technique based on the time-constants of heat sink temperature is proposed to check the health status of wind power converter. Advantages of the proposed technique include: (1) This approach enables the monitoring of power module degradation and cooling system deterioration in the converter simultaneously. (2) This method does not need to measure the junction temperature and power loss which reduces the cost and complexity of operation. Experimental tests were conducted to verify the effectiveness of this technique. Results also indicate that the maximum coefficient of variation of time-constants is below 1.7% under different converter operating conditions and ambient temperatures. In addition, the maximum error of time-constants in the application of condition monitoring is less than 3.1%. [ABSTRACT FROM AUTHOR]

Insulated-gate bipolar transistor (IGBT) modules and dc-link capacitors are important parts in the majority of power electronic converters which contribute to cost, size, and failure rate on a considerable scale. This paper presents an online condition monitoring method for both IGBT modules and dc-link capacitors of power converters based on short-circuit current of an IGBT module, which is a good condition indicator according to the theory analysis. The failure prediction of dc-Link capacitor is realized by equivalent series resistance, which can be calculated by short-circuit current and a step voltage, and the bond wires fatigue can also be identified by the short-circuit current. The proposed method is capable for detecting small changes in the failure indicators of IGBT modules and electrolytic capacitors, and its effectiveness is validated by a confirmatory experiment. The novelty of the proposed method is that the degradations of IGBT modules and capacitors can be identified simultaneously, and has the merits of low cost and circuit simplicity [ABSTRACT FROM PUBLISHER]

Finding and replacing the defective insulated-gate bipolar transistor (IGBT) module timely by monitoring the ageing state of IGBT can improve the reliability of a power converter and reduce the loss caused by IGBT failure. A method for detecting the condition of bond wires in IGBT module by identifying the short-circuit current of IGBT module is presented in this paper. It is based on the fact that parasitic parameters of IGBT module are affected by the local damage induced by ageing over time, and these changes can be easily detected by monitoring the difference of short-circuit current. The study results indicate that short-circuit current of IGBT module decreases with module ageing over time, and the difference of short-circuit current caused by junction temperature is much smaller than that caused by bond wires fatigue on a specific gate driving voltage. Therefore, the IGBT module in the power converter can be diagnosed by detecting the difference of short-circuit current without considering the effects of junction temperature. Finally, a confirmatory experiment is carried out, and the correctness of the method proposed in this paper is verified. [ABSTRACT FROM AUTHOR]

Monitoring the defective multichip insulated gate bipolar transistor (IGBT) module is a cost-effective approach to improve the quality of customer service. A method using time duration of the gate charge is proposed to monitor bond wires fatigue of the multichip IGBT modules when the modules are in the off-state. It is based on the fact that failure of the chip branch due to bond wires fatigue changes the gate input capacitance of the multichip IGBT module. The health state of bond wires can be converted into the change of time duration of gate charge under the constant gate current. A driver containing the constant current source is proposed. The study results indicate that the time duration of the gate charge decreases significantly when the failure of the chip branch occurs, and the effect of junction temperature can be ignored within the special range of gate voltage. Condition monitoring can be implemented during the off-state of the multichip module and without considering the effects of junction temperature. The confirmatory experiment is carried out to verify the correctness of the proposed method. [ABSTRACT FROM AUTHOR]