Search

Energy storage is one of the most stimulating requirements to keep civilization on the wheel of progress. Supercapacitors generally exhibit a high‐power density, have a maximum life cycle, quick charging time, and are eco‐friendly. Polyaniline (PANI), a conductive polymer, is considered an efficacious electrode material for supercapacitors due to its good electroactivity, including pseudocapacitive behavior. Here, we present the fabrication of a symmetric supercapacitor device based on steel mesh electrodeposited with PANI. Due to its effective conductivity, porous nature, and low cost, steel mesh is a good choice as a current collector to fabricate a high‐performance supercapacitor at a low cost. The optimum fabricated supercapacitor has a high specific capacitance of ∼353 mF cm−2. Furthermore, the supercapacitor obtained an energy density of ∼26.4 μW h cm−2 at a power density of ∼400 μW cm−2. The fabricated supercapacitor shows high stability, as the initial capacitance remained almost the same after 1000 charge/discharge cycles. PANI is a promising candidate for mass production and wide applications due to its low cost and high performance. [ABSTRACT FROM AUTHOR]

Attaining a sustainable environment has become a prime area of research interest, as it is an utmost necessity for a healthy life. Hence, ample studies have been carried out in adopting different processes and utilizing various materials to attain the goal. Herein, we present an exclusive discussion on one such material, i.e., polyaniline (PANI) and its derivatives. Being an intrinsic conducting type, it has grabbed more attention due to its durability in different doped/un-doped states, promptness in structural alteration, and solution processability. This review presents an exhaustive discussion on published reports showing utilization of PANI and its derivative in various forms like pure and composites, for cleaning the environment through adsorption, photodegradation, etc., and the various methods adopted in order to achieve an optimum operating condition to obtain the maximum outcome. In addition to these merits and demerits, various technical challenges faced with materials have been also presented. Therefore, it is expected that this piece of work, presenting the exhaustive discussion on PANI and; its derivatives would help to develop a better understanding of this excellent conducting polymer PANI and provide a state of art on the role of this material for attaining sustainable surroundings for the living beings. [ABSTRACT FROM AUTHOR]

Energy generation can be clean and sustainable if it is dependent on renewable resources and it can be prominently utilized if stored efficiently. Recently, biomass-derived carbon and polymers have been focused on developing less hazardous eco-friendly electrodes for energy storage devices. We have focused on boosting the supercapacitor's energy storage ability by engineering efficient electrodes in this context. The well-known conductive polymer, polyaniline (PANI), deposited on nickel foam (NF) is used as a positive electrode, while the activated carbon derived from jute sticks (JAC) deposited on NF is used as a negative electrode. The asymmetric supercapacitor (ASC) is fabricated for the electrochemical studies and found that the device has exhibited an energy density of 24 µWh/cm2 at a power density of 3571 µW/cm2. Furthermore, the ASC PANI/NF//KOH//JAC/NF has exhibited good stability with ~86% capacitance retention even after 1000 cycles. Thus, the enhanced electrochemical performances of ASC are congregated by depositing PANI on NF that boosts the electrode's conductivity. Such deposition patterns are assured by faster ions diffusion, higher surface area, and ample electroactive sites for better electrolyte interaction. Besides advancing technology, such work also encourages sustainability. [ABSTRACT FROM AUTHOR]