Search

The ITER magnet system will operate in extremely severe conditions, which impose high requirements for mechanical and dielectric strength of the electrical insulation of the superconductive coils. Only monolithic structure obtained during the VPI procedure is capable to provide the required mechanical and dielectric strength for electrical insulation. To provide the qualitative insulation, a temperature non-uniformity of the electrical insulation should be kept within the range of [−5, +5 °C] and [−0, +20 °C] during filling with epoxy compound and its curing, respectively. The PF1 coil is about 150 t in weight and consists of materials with different thermal conductivity. Besides, a complicated geometry of the coil adds complexity to VPI. Since the VPI is usually a long-term and irreversible process (within pot life of compound), the whole process should be controllable. The paper describes the developed calculation model of the ITER PF1 coil and presents the results of numerical simulation of this model at VPI of electrical insulation. The completed VPI of the ITER PF1 coil has verified the proposed method for coil heating and proved an acceptable agreement between the calculated and measured temperature distributions throughout the VPI procedure. [ABSTRACT FROM AUTHOR]