Search

Obstacle avoidance is crucial for autonomous surface vehicles (ASVs) in the sea because rescue is extremely difficult there. OceanVoy, a sailboat toward long range energy-saving voyage, has to overcome the dual challenges, i.e. from the environmental interference and its low mobility preventing from precise obstacle avoidance. We propose a control scheme based on real-time collision risk assessment and a hybrid propulsion system to enhance safety of OceanVoy. A novel sailboat safety zone (SSZ) has been designed to warn the potential collision during its sailing. Both intrinsic characteristics of OceanVoy and environmental factors have been considered in SSZ. We use lateral and axial thrusters to provide emergency propulsion. A collision avoidance algorithm is executed to coordinate motors in rudder, sail and thrusters based on SSZ. Both simulation and experiments have been conducted and the results have validated our system and collision avoidance scheme.

Towards long range and high endurance sailing, energy is of utmost importance. Moreover, benefiting from the dominance of the sailboat itself, it is energy-saving and environment-friendly. Thus, the sailboat with energy planning problem is meaningful. However, until now, the sailboat energy optimization problem has rarely been considered. In this paper, we focus on the energy consumption optimization of an autonomous sailboat. It has been formulated as a Nonlinear Programming problem (NLP). We deal with it with a hybrid control scheme, in which pseudo-spectral (PS) optimal control method is used in heading control, and a model-free framework guided by Extreme Seeking Control (ESC) is used in sail control. The optimal path is generated with the optimal input motor torques in time series. As a result, both simulation and experiments have validated motion planning and energy planning performance. Notably, about 7% of energy is saved on average. Our proposed method can make sailboats sailing longer and sustainable.

Automatic latching for charging in a disturbed environment for Unmanned Surface Vehicle (USVs) is always a challenging problem. In this paper, we propose a two-stage automatic latching system for USVs charging in berth. In Stage I, a vision-guided algorithm is developed to calculate an optimal latching position for charging. In Stage II, a novel latching mechanism is designed to compensate the movement misalignments from the water disturbance. A set of experiments have been conducted in real-world environments. The results show the latching success rate has been improved from 40% to 73.3% in the best cases with our proposed system. Furthermore, the vision-guided algorithm provides a methodology to optimize the design radius of the latching mechanism with respect to different disturbance levels accordingly. Outdoor experiments have validated the efficiency of our proposed automatic latching system. The proposed system improves the autonomy intelligence of the USVs and provides great benefits for practical applications.

Obstacle avoidance of autonomous sailboats is a complicated task due to big inertia, highly nonlinear motion of sailboat and uncertain disturbance from wind and water current. To deal with the obstacle avoidance problem of autonomous sailboats, we promote a novel method based on reinforcement learning with coarse-to-fine strategy. In this strategy, coarse stage is used to detect the autonomous sailboat roughly in the test environment. Then fine stage is applied to localize the autonomous sailboat accurately. Hereby, the avoidance performance is improved by the transition from coarse to fine. We have verified our algorithms both in simulation and real experiments. With our method, the sailboat avoids the obstacle in higher precision than the method without the coarse-to-fine strategy. The final success rate of obstacle avoidance is near 83% and the rate of reaching goal is 70%. Both simulation results and experiments show that our method is effective.

Autonomous sailboat as an energy saving robotic vessel driven by wind, is becoming an emerging trend in ocean sampling, surveillance and management. Hereby, collision avoidance for autonomous sailboats appears to be an insurmountable problem due to its restricted manoeuvrability. In this study, we propose a method to realize the collision avoidance for autonomous sailboats under the Racing Rule of Sailing (RRS). Using the safety circles concept, the speed and heading information of the autonomous sailboats are used to predict and determine the collision risk. Then the correct RRS rule is matched according to the collision situation when the Closest Point of Approach (CPA) of autonomous sailboats is less than zero. And collision avoidance response is planned and implemented accordingly. The proposed method was implemented and verified in experiments. Four different sailing cases were discussed and demonstrated with successful collision avoidance for autonomous sailboats.

The ability to maintain balance and stability is a major challenge for quadruped robots in locomotion. For example, when walking in the unstructured environment, the robot not only needs to adjust its gait according to the terrain information, but also needs to tune the body posture based on the real-time body posture acquired from inertial measurement unit (IMU) to maintain stability. In this paper, we present a method that focuses on the design of the posture correction controller based on the IMU feedback for adaptive slope walking for a quadruped robot. To this end, the posture correction controller is integrated into the foot trajectory generator to maintain balance. We experimentally validated our approach both on simulation and real quadruped robot. Compared with the one only with the foot trajectory generator, the quadruped robot can walk more stable with the posture correction controller integrated into the foot trajectory generator and has a better locomotion ability. Our method increases locomotion stability when walking on the slopes.

Trajectory tracking is a decisive factor that affects autonomous driving performance of mobile robots in real-world applications, such as industry, service and other areas. Nowadays, there has been many works about path planning and trajectory tracking. Whereas there are problems to be improved to make mobile robot well applied in practical world. For example, generated trajectory can't be tracked smoothly, and the robot has to stop and rotate itself to adjust pose and pass segments in trajectory because of constrains of path curvature and robot's kinematics model. In this paper, a new trajectory planning algorithm with cubic spline interpolation method was proposed, which fully considered constrains of robot model including velocity and acceleration bounds. And corresponding trajectory was generated. Then a robust controller was built to conduct tracking tests. Experimental results demonstrate that our planning and tracking algorithm could help robot achieve a smooth, accurate and efficient trajectory tracking performance without any stop.

Leader-follower system could expand the load capacity in transport tasks. While few related literatures pay attention to the physical limitation and limit the maximum output velocity of designed controller. This paper expands a trajectory tracking controller with velocity constraints to leader-follower system. Leader and follower are both subjected to linear velocity constraint and angular velocity constraint due to the physical limitation. Selected trajectory tracking controller is applied in leader-follower system. Meanwhile, noises in reference trajectory of follower are released by Kalman filter. Then, a physical experiment platform with Turtlebots is established to verify this control scheme. Finally, experiment results of several examples proved the practicability of proposed control system. The velocity commands of this control system would not exceed the limitation of physical limitation.

This paper investigates the cooperative moving-target enclosing control problem of networked unicycle-type nonholonomic vehicles with constant linear velocities. The information of the target is only known to some of the vehicles, and the topology of the vehicle network is described by a directed graph. A dynamic control law is proposed to steer the vehicles, such that they can get close to orbiting around the target while the target is moving with a time-vary velocity. Besides, the constraint of bounded angular velocity for the vehicles can always be satisfied. The proposed control law is distributed in the sense that each vehicle only uses its own information and the information of its neighbors in the network. Finally, simulation results of an example validate the effectiveness of the proposed control law.

Accurate turning is not an easy task for the quadruped robot and previous work mainly addresses the problem with complex control strategy or systems. This paper proposes a design method for the accurate turning motion of a quadruped robot with 12 degrees of freedom (DOF). Unlike others, we have achieved precise turning motion with a relatively simple geometric approach. Once the parameters of desired movement are set, such as the turning radius and angles, the robot can realize corresponding circle locomotion. A design architecture including geometric analysis, 3D foot trajectory design and inverse kinematics is presented to solve the problem systematically. In addition, according to the different conditions, the corresponding compensation coefficient is necessarily considered in order to acquire precise values of leg joints. At last, comparison results by several experiments have identified the feasibility and accuracy of turning along a circle trajectory based on our proposed method.

In this paper, we propose a novel design of gaits for space manipulators so as to minimize the dynamic disturbance on a space station. Without modifying their joint configuration, we first propose the use of our previous developed gripping methodology. It combines the concepts of wheels motion in parallel grippers to reduce the swing motions in conventional gaits. For the proposed gaits, three major aspects are considered including 1) linear motion; 2) turning; and 3) exterior transition. Based on the conventional modeling approach for fixed base space manipulators, we extend the method to formulate the dynamic coupling during wheels motion. It is to visualize the manipulator as a prismatic joint with its gripping base moving with wheels motion. Also, we develop an experimental platform for verification. For disturbance analysis, various simulations have been conducted. Results have validated that the proposed gaits generate the lowest disturbance on a space station.

Space robots are in huge demand due to the rapid growth of their service targets, i.e., spacecraft. There are generally large flexible components on spacecraft, such as antenna reflectors and solar paddles. Due to the vibratility of their structure, it is challenging for a space robot with flexible appendages (the base is then called flexible-base) to capture and repair the large flexible spacecraft. After capturing, the two spacecraft with flexible appendages are connected by a space manipulator, and a compounded system is formed. In this paper, we developed a dynamic model and a closed-loop simulation system, to provide a means to verify path planning and control algorithms. Initially, the dynamic characteristics of different capturing stages (preimpact and post-impact) were analyzed. The topologies of a flexible-base space robot and the compounded system were described based on incidence and channel matrices. Secondly, the recursive dynamics was formulated and resolved by an effective numerical method. The modeling was verified by Adams’ model. Thirdly, we implemented a dynamics calculation block in Matlab/Simulink environment using the S-function package for the C program, and developed a closed-loop simulation system, which was composed of the Planning and Controller, the Multibody Dynamic, and the 3D Display modules. Finally, based on the simulation system, two typical missions—target berthing and on-orbital manipulation of the target along a circle, were simulated and evaluated. Dynamics analysis results presented some useful rules for the path planning and control to suppress the vibration of the flexible structure.

Battery fast charging is one of the most significant and difficult techniques affecting the commercialization of electric vehicles (EVs). In this paper, we propose a fast charge framework based on model predictive control, with the aim of simultaneously reducing the charge duration, which represents the out-of-service time of vehicles, and the increase in temperature, which represents safety and energy efficiency during the charge process. The RC model is employed to predict the future State of Charge (SOC). A single mode lumped-parameter thermal model and a neural network trained by real experimental data are also applied to predict the future temperature in simulations and experiments respectively. A genetic algorithm is then applied to find the best charge sequence under a specified fitness function, which consists of two objectives: minimizing the charging duration and minimizing the increase in temperature. Both simulation and experiment demonstrate that the Pareto front of the proposed method dominates that of the most popular constant current constant voltage (CCCV) charge method.

This paper presents an omnidirectional steer-by-wire system for a four-wheel independent steering vehicle. The system consists of an extended steering interface and a behavior-based steering controller. The extended steering interface provides a novel manipulation way to vehicle driver. The driver can control the vehicle in traditional way or omnidirectionally without any mode switching operation. The reservation of the traditional driving way makes the driver adapt the novel steering interface easily. The steering interface also has a force-feedback function to synchronize the extended steering interface and the orientations of wheels so as to improve vehicle handling. The behavior-based steering controller is designed for controlling the orientations of wheels. It acts as virtual linkage among each wheel to minimize wheel slip resulted by the misalignment of wheels. As there is no trajectory planning needed in the control algorithm, the proposed controller is especially suitable for a nonautonomous vehicle, the driving path of which cannot be predetermined.

In this paper, we discuss the problem of how human control strategy can be represented as a parametric model using a support vector machine (SVM) and how an SVM-based controller can be used in controlling dynamically stable systems. The SVM approach has been implemented in the balance control of Gyrover, which is a dynamically stable, statically unstable, single-wheel mobile robot. The experimental results that compare SVM with general artificial neural network approaches clearly demonstrate the superiority of the SVM approach with regard to human control strategy learning.

To provide a high starting torque and to work under a high rpm range are the design requirements for the integrated startgenerators (ISG) used for intelligent vehicles with hybrid powertrains. However, meeting with both of these two requirements usually involves with sophisticated motor and controller design and high manufacturing cost. Hence, a transmission with variable reduction ratio is desired to be configured between the ISG and the engine. In an earlier paper, a Controller-Free Ratio-Variable gearbox design concept has been introduced, which can auto change gear ratios in a purely mechanical way and avoid from using any controller or actuators. This paper represents the work on implementation, testing and evaluation of the gearbox. The performance of the gearbox proof to be functional though the test result.

A transmission from the engine crank to the main transmission with variable reduction ratio is desirable for the hybrid electric vehicles, especially for micro/mild hybrid vehicles with auto start-stop function, for the sake of reducing the design requirements for integrated starter-generator and thus reducing the cost. This paper presents a solution to the issue by introducing a Controller-Free Ratio-Variable gearbox. Unlike other solutions, the proposed gearbox avoids from using actuators to change gear ratios but realize the function in a purely mechanical and fully automatic way. This feature reduces system complexity and improves system stability, as electronic-based info sensing and actuating are not as robust in the engine compartment. Also, the feature allows to change gear ratio faster and thus better protecting integrated starter-generator from over speeding. In this paper, the principle of the gearbox is explained and its performance under different conditions is studied.

This paper presents a novel Differential Modular Robot Joint (DMRJ), which has high payload capability and low weight. The ratio between the output torque and the reducer's weight is 178.3 Nm/kg, which is the highest value we have known. The DMRJ is designed modularly for high payload tasks and can be attached to robots as arms or legs. Two high power DC brush motors are applied to drive the differential mechanism, which can rotate in two degrees of freedom (DOF) and has a minimal size. A control algorithm for the DMRJ has been devised in accordance with the kinematic and mechanical analysis. A prototype of the DMRJ has been manufactured, and the effectiveness of the control algorithm has been verified by several experiments. Thanks to its excellent performance, the DMRJ can be widely utilized in many robotic applications.

In this paper, a traction/braking force distribution algorithm for omni-directional all-wheel-independent-drive vehicles is proposed as a tool to enhance driving stability. In the proposed algorithm, the amount of the traction or braking force on each driving wheel can be determined so as to generate a desired tangential force, yaw moment and centripetal force independently. The algorithm considers omni-directional steering command and is capable of handling both traction and braking force commands. The algorithm is applicable on vehicles with at least three independent driving wheels. Simulations have been conducted to illustrate the use of the proposed force distribution method in enhancing vehicles stability.

In this paper, a deterministic yaw moment controller for four wheel independent steering and drive vehicles is proposed to enhance driving stability and controllability. Different to conventional methods that track a desired yaw rate, the proposed controller stabilizes a vehicle by additionally tracking the heading angle of a vehicle which is more efficient and robust. The heading angle of a vehicle is obtained by a novel method which is based on centripetal force detection. It eliminates the prerequisite knowledge of the characteristics between wheels and road surface which are time varying and difficult to be measured in real time. The proposed system only requires low cost sensing equipment such as wheel speed sensor and accelerometer that makes the system practical to be utilized. The proposed heading angle detection method can be generally applied to any kind of vehicle. The deterministic yaw moment controller is also applicable to any type of four wheel independent drive vehicles.

In this paper, a new Cartesian gas cutting robot was designed, which had five servo motors and six stepped motors. Also, we developed a three-torch model and studied algorithm and boundary conditions that were pretty available for three-torch device and experiment verified this theory. A laser height control system was also developed in this robot. And the experiments certified that the model was effective and could be satisfy with the actual industrial needs. Meanwhile, the laser height control system could realize height tracking when the surface of the steel was not flat.

In this paper, we study the stability region for a set of intelligent controllers developed by learning human expert control skills using support vector machines (SVMs). Based on the discrete-time system Lyapunov theory, a Chebychev points based estimation approach is proposed to evaluate the stability region, a key property of this set of SVM-based human learning controllers. One of such learning controllers has been implemented in vertical balance control of a dynamically stable, statically unstable single wheel mobile robot - Gyrover. The experimental results validate the proposed scheme for estimation of the stability region.

State of Charge (SoC) estimation is one of the most significant and difficult techniques to promote the commercialization of electric vehicles (EVs). Suffering from various interference in vehicle driving environment and model uncertainties due to the strong time-variant property and inconsistency of batteries, the existing typical SoC estimators such as coulomb counting and extended Kalman filter cannot perform their theoretically optimal efficacy in practical applications. Aiming at enhancing the robustness of SoC estimation and improving accuracy under the real driving conditions with noises and uncertainties, this paper proposes a framework consisting of (1) an adaptive-κ nonlinear diffusion filter to reduce the noise in current measurement, (2) a self-learning strategy to estimate and remove the zero-drift, (3) a coulomb counting algorithm to realize open-loop SoC estimation, (4) an H ∞ filter to implement closed-loop robust estimation, and (5) a data fusion unite to achieve the final estimation by integrating the advantages of the two SoC estimators. The availability and efficacy of each component have been demonstrated based on comparative studiesin simulation with the conventional approaches respectively, under the testing conditions of noises with various signal-noise-ratios, varying zero-drifts, and different model errors. The overall framework has also been verified to rationally and efficiently combine these components and achieve robust estimation results in the presence of kinds of noises and uncertainties.

Battery equalization, aiming at keeping the state of charge of inside cells in the same level, is of great importance to maximize the capacity of whole battery pack and keep cells away from overcharge and overdischarge damage. In this paper, based on the analysis of bi-directional Cuk converter, we have proposed a fuzzy controller to adaptively tune the equalizing current. The inputs of fuzzy controller are selected as the difference in state of charge, the average of state of charge and the total internal resistance. The overall performance of the proposed equalizer is evaluated by multi-indexes such as equalizing speed, efficiency and cell protection. Simulations are conducted based on a well established 6Ah Li-ion battery provided in Advisor. The results under various initial conditions show that the proposed equalizer has the ability to balance the equalizing speed and efficiency. Any pair of cells with difference in state of charge less than 0.3 can be equalized within one hour and with the energy efficiency around 0.95.

This paper presents a novel vehicle named omni-directional Kart (OK-1), in which robotic technologies, such as 4 wheel independent driving (4WID) and 4 wheel independent steering (4WIS), are integrated to decouple the motions of translation and rotation from each other. As a result, omni-directional motions such as zero radius turning (ZRT) and lateral parking (LP) are realized for better vehicle steerability and mobility in limited space.