Search

The grid-connected modular multilevel converter (MMC) is very likely to operate under asymmetric grid conditions. Such a converter features several unique characteristics, which make its analysis different from other types of power converters in similar cases. In this paper, the three well-established control techniques, i.e., balanced current and negative sequence current injection for active/reactive power oscillation elimination, are tailored for the MMC case taking into account grid current limitation under fault conditions. Since the focus is laid on the MMC design impact during grid asymmetries, the three methods are compared in terms of branch energy variation increase as well as maximum achievable active power transfer. Moreover, the effect of circulating current second-order harmonic injection for capacitive storage reduction as well as dc-link oscillation elimination is also studied. Finally, experimental results from a downscaled laboratory prototype verify the theoretical studies. [ABSTRACT FROM PUBLISHER]

The internal control of a modular multilevel converter aims to equalize and stabilize the submodule capacitor voltages independent of the loading conditions. It has been shown that a submodule selection mechanism, included in the modulator, can provide voltage sharing inside the converter arm. Several procedures for controlling the total stored energy in each converter arm exist. A new approach is described in this paper. It is based on estimation of the stored energy in the arms by combining the converter electromotive force reference, the measured alternating output current, and the known direct voltage. No feedback controllers are used. Experimental verification on a three-phase 10 kVA prototype is presented along with the description of the new procedure. [ABSTRACT FROM AUTHOR]