Search

In this study, a model predictive control (MPC) strategy that combines finite-control-set MPC with selective harmonic elimination (SHE) modulation pattern in its formulation is proposed to govern multilevel power converters. Based on a desired operating point for the system state (converter current reference), an associated predefined SHE voltage pattern is obtained as a required steady-state control input reference. Then, the cost function is formulated with the inclusion of both system state and control input references. According with the proposed reference and cost function formulation, the predictive controller prefers to track the converter output current reference in transients, while preserving the SHE voltage pattern in steady state. Hence, as evidenced by experimental results, a fast dynamic response is obtained throughout transients while a predefined voltage and current spectrum with low switching frequency is achieved in steady state. [ABSTRACT FROM PUBLISHER]

Modular multilevel converters have several attractive features such as a modular structure, high voltage capability and scalability, excellent quality of the output voltage waveforms, as well as, low expense for redundancy. However, the main drawback of this converter is the complexity of the control system due to the multiple control objectives which include the input, output, circulating current and the capacitor voltages. Several control schemes for the capacitor voltages have been proposed, being usually divided into the control of the average voltage and the balancing of the capacitor voltages among the submodules and among the arms. These control schemes can effectively control the capacitor voltage when the reference is the same for all arms, but they cannot manage arbitrary voltage references when each arm capacitor voltage must be controlled independently as required, for example, to achieve maximum power point tracking in photovoltaic applications. This paper proposes a control strategy for a modular multilevel converter capable to manage the average capacitor voltage of each arm independently. The proposed scheme is based on a decomposition of the energy of the arms in different components, according to theirs symmetries. Results validating the performance of the proposed control scheme are shown and the impact on the output current is also discussed. [ABSTRACT FROM PUBLISHER]

This paper deals with the dimensioning of the capacitors in modular multilevel converters based on analytical equations. Considered design parameters are the (periodic) energy fluctuation, the admissible ripple voltage, and the demand in control reserve. Design examples complete this paper. [ABSTRACT FROM PUBLISHER]

Recently developed insulated-gate bipolar transistor (IGBT) press-pack (PP) devices with a blocking voltage of 4.5 kV are being used in medium-voltage converters as an alternative to integrated gate-commutated thyristors (IGCTs). This paper presents an overview of PP packaging and both semiconductor technologies. A quantitative comparison of these devices is achieved through measurements for a 4.5-kV 1.2-kA IGBT and a 4.5-kV 4-kA IGCT. The laboratory test bench for the switching transient characterization at a dc-link voltage of 2.5 kV and currents up to 3 kA is described. Conduction, blocking, and switching behavior for junction temperatures up to 125 ^\circ\C are investigated. The IGCT and the IGBT are tested using a di/dt-limiting clamp circuit. In addition, the IGBT is tested in hard switching mode. [ABSTRACT FROM PUBLISHER]

This paper introduces a new iterative design procedure of L and LCL filters for low-voltage active-front-end PWM two-level voltage source converters. The analytical expression of the converter harmonic voltages by Bessel functions is applied to design the filter parameters for defined maximum grid current harmonics. Different filter designs are derived for various resonance frequencies and inductance split factors of LCL filter. The minimum amount of stored energy of passive components is used to select a final filter design. A voltage-oriented control scheme, including active damping, is applied in the (400 V and 50 kVA) experimental setup. Both simulation and experimental investigations are presented to verify the accuracy of the filter design procedure. Finally, the steady state and transient performance of the active front end with different LCL filters are depicted. [ABSTRACT FROM AUTHOR]

Compares a matrix converter (MC) and dc-voltage link converter for modern AC motor drives. Discussion on part count, semiconductor losses and input filter design; Operation of semiconductors; Reduction on device rating of MC.

In this paper, a design driven comparison between two 190 kVA industrial three-phase two-level voltage source converter (2L-VSC) designs based in silicon carbide (SiC) and silicon (Si) for 690 V grids is presented. These two designs were conceived to have the same nominal power, while switching at reasonable switching speeds and requiring the same case to ambient thermal impedance. Under these conditions, the designs were studied to detect the potential gains and limitations that a pragmatic converter design could feature when using these two technologies regarding cost, efficiency, size and weight. To achieve this, experimentally determined semiconductor characteristics were used to perform simulations, the results of which were then used to design the essential parts of the converter. These designed parts were then corroborated with manufacturers, from which physical characteristics of all designed components were obtained. The results show that the SiC based design presents substantial weight savings and an 11% system cost reduction, while preserving its traditional characteristics such as improved overall efficiency when compared to the silicon based design under the given design requirements and constraints. [ABSTRACT FROM AUTHOR]